Search   
MSDS 
:
 Ethylaluminium sesquichloride, 0.4M solution in hexane
CAS 
:
 110-54-3
SYNONYMS 
:
 EASC
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
|----------------|--------------------------------------|----------|-----------|
| 110-54-3 |Hexane | 85 | 203-777-6 |
|----------------|--------------------------------------|----------|-----------|
| 12075-68-2 |Ethyl aluminum sesquichloride | 15 | 235-137-7 |
+----------------+--------------------------------------+----------+-----------+
Text for R-phrases: see Section 16
Hazard Symbols: F C N
Risk Phrases: 11 14/15 35 48/20 62 51/53 65 67

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Reacts violently with water liberating extremely
flammable gases. Causes severe burns. Harmful : danger of serious
damage to health by prolonged exposure through inhalation. Possible
risk of impaired fertility. Toxic to aquatic organisms, may cause
long-term adverse effects in the aquatic environment. Harmful: may
cause lung damage if swallowed. Vapours may cause drowsiness and
dizziness.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns. May cause lung damage.
Inhalation:
Harmful if inhaled. Causes chemical burns to the respiratory tract.
Inhalation of vapors may cause drowsiness and dizziness.
Chronic:
May impair fertility.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Will burn if involved in a fire. Water Reactive.
Material will react with water and may release a flammable and/or
toxic gas. Flammable liquid and vapor.
Extinguishing Media:
Do NOT use halogenated agents. Use dry sand, dry chemical, soda ash
or lime. DO NOT USE WATER OR FOAM.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Use a spark-proof tool. Do not expose spill to water.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not allow water to get into the container because of violent
reaction. Use spark-proof tools and explosion proof equipment. Do
not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin,
or on clothing. Take precautionary measures against static
discharges. Use and store under nitrogen. Do not allow contact with
water. Use only in a chemical fume hood.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container. Flammables-area. Corrosives
area. Water free area. Store protected from moisture. Store under
nitrogen.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 110-54-3:
United Kingdom, WEL - TWA: 20 ppm TWA; 72 mg/m3 TWA
United Kingdom, WEL - STEL: 60 ppm STEL; 216 mg/m3 STEL
United States OSHA: 500 ppm TWA; 1800 mg/m3 TWA
Belgium - TWA: 50 ppm VLE; 179 mg/m3 VLE
France - VME: 50 ppm VME; 170 mg/m3 VME
Germany: 50 ppm TWA; 180 mg/m3 TWA
Japan: 40 ppm OEL; 140 mg/m3 OEL
Malaysia: 50 ppm TWA; 176 mg/m3 TWA
Netherlands: 25 ppm MAC; 90 mg/m3 MAC
Russia: 300 mg/m3 TWA
Spain: 50 ppm VLA-ED; 179 mg/m3 VLA-ED
CAS# 12075-68-2:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: colorless
Odor: hexane-like
pH: < 7
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: >180 deg C
Solubility in water: vigorous reaction
Specific Gravity/Density: 0.701
Molecular Formula: C6H16Al2Cl3
Molecular Weight: 247.51

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Air sensitive. Reacts violently with water. Moisture sensitive.
Conditions to Avoid:
Incompatible materials, ignition sources, exposure to moist air or
water, temperatures above 160C.
Incompatibilities with Other Materials:
Oxidizing materials, water, acids, alcohols, oxygen, organic halides,
moisture.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide, aluminum oxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 110-54-3: MN9275000
CAS# 12075-68-2: BD1950000
LD50/LC50:
CAS# 110-54-3: Draize test, rabbit, eye: 10 mg Mild; Inhalation,
mouse: LC50 = 150000 mg/m3/2H; Inhalation, rat: LC50 = 48000 ppm/4H;
Inhalation, rat: LC50 = 627000 mg/m3/3M; Oral, rat: LD50 = 25 gm/kg.
CAS# 12075-68-2.
Carcinogenicity:
Hexane -
Not listed by ACGIH, IARC, or NTP.
Ethyl aluminum sesquichloride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ORGANOMETALLIC COMPOUND SOLUTION, WATER-REACTIVE,
FLAMMABLE, N.O.S.* (forbidden to ship via cargo or pass
Hazard Class: 4.3 (3)
UN Number: 3207
Packing Group: I
IMO
Shipping Name: ORGANOMETALLIC COMPOUND SOLUTION, WATER-REACTIVE,
FLAMMABLE, N.O.S.
Hazard Class: 4.3 (3)
UN Number: 3207
Packing Group: I
RID/ADR
Shipping Name: ORGANOMETALLIC COMPOUND SOLUTION, WATER-REACTIVE,
FLAMMABLE, N.O.S.
Hazard Class: 4.3 (3)
UN Number: 3207
Packing group: I
USA RQ: CAS# 110-54-3: 5000 lb final RQ; 2270 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F C N
Risk Phrases:
R 11 Highly flammable.
R 14/15 Reacts violently with water liberating
extremely flammable gases.
R 35 Causes severe burns.
R 48/20 Harmful : danger of serious damage to health
by prolonged exposure through inhalation.
R 51/53 Toxic to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.
R 62 Possible risk of impaired fertility.
R 65 Harmful: may cause lung damage if swallowed.
R 67 Vapours may cause drowsiness and dizziness.
Safety Phrases:
S 6A Keep under nitrogen.
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 29 Do not empty into drains.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 43B In case of fire, use fire-fighting equipment
on basis of sodium chloride, sodium bicarbonate (never
use water).
S 43E In case of fire, use dry sand (never use
water).
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 57 Use appropriate containment to avoid
environmental contamination.
WGK (Water Danger/Protection)
CAS# 110-54-3: 1
CAS# 12075-68-2: 1
Canada
CAS# 110-54-3 is listed on Canada's DSL List.
CAS# 12075-68-2 is listed on Canada's DSL List.
CAS# 110-54-3 is listed on Canada's Ingredient Disclosure List.
CAS# 12075-68-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 110-54-3 is listed on the TSCA inventory.
CAS# 12075-68-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

Text for R-phrases from Section 2
R 11 Highly flammable.
R 38 Irritating to skin.
R 48/20 Harmful : danger of serious damage to health by
prolonged exposure through inhalation.
R 62 Possible risk of impaired fertility.
R 51/53 Toxic to aquatic organisms, may cause long-term
adverse effects in the aquatic environment.
R 65 Harmful: may cause lung damage if swallowed.
R 67 Vapours may cause drowsiness and dizziness.
MSDS Creation Date: 9/20/2004 Revision #0 Date: Original.

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Chloro-1,3-benzenedithiol 58593-78-5
3,5-Dichloronitrobenzene, 98% 618-62-2
3,5-Dinitroaniline 618-87-1
Sand, Sea Washed 14808-60-7
9H-Fluorene-1-carboxylic acid 6276-03-5
Trifluoroacetic acid lithium salt monohydrate, 95% 0-01-1
3-Methyladenine 5142-23-4
3-(1,3-Dioxan-2-yl)aniline 168551-56-2
Fluoroboric Acid 7732-18-5
4-(4-Methyl-4H-1,2,4-triazol-3-yl)aniline 0-01-1
3-Chloropropyl-N-benzylmethylamine 3161-52-2
2-Phenoxyaniline 2688-84-8
4'-Methyl-4-biphenylcarboxylic acid 720-73-0
Methyl 4'-methylbiphenyl-4-carboxylate 49742-56-5
4,4'-Dimethyl-2,2'-bipyridyl 1134-35-6
4-Bromo-2-fluorobiphenyl 41604-19-7
4'-Cyanoacetanilide 35704-19-9
4-(2-Hydroxyethoxy)benzaldehyde 22042-73-5
2,6-Dichlorocinnamic Acid, 99%, Predominantly Trans 5345-89-1
Tetramethylsilane, 99% 75-76-3
Benzenethionosulfonic acid, sodium salt 1887-29-2
1-Benzyl-3-hydroxy-1h-indazole 2215-63-6
2-Chlorobenzyl mercaptan 39718-00-8
2-Chlorophenyl acetate 4525-75-1
Caprylic/Capric/Stearic triglyceride 0-01-1
2-Methylindole-3-carboxaldehyde 5416-80-8
Tri-n-propylaluminium, 0.7M solution in heptane 102-67-0
Tri-n-butylaluminium, 0.7m solution in heptane 142-82-5
Diisobutylaluminium chloride, 0.6M solution in heptane 142-82-5
Dimethylaluminium chloride, 0.9M solution in heptane 142-82-5
Ethylaluminium sesquichloride, 0.4M solution in hexane 110-54-3
Bis(cyclopentadienyl)dimethyltitanium, 5 wt% solution in toluene 108-88-3
1,1,1-Trifluoro-3-phenyl-2-propanone 350-92-5
2-Fluoro-4-methoxybenzaldehyde 331-64-6
2-Fluoro-5-methoxybenzaldehyde 105728-90-3
2-Bromo-4-fluorobenzotrifluoride 351003-21-9
Fluoroacetone 430-51-3
4-Isopropylbenzenesulfonyl chloride, 95% 54997-90-9
Lithium tert-butoxide, 2.2m solution in thf 109-99-9
Silicagel, functionalized, 4-Bromophenyl, 1 mmol/g 108-86-1
Ethyl 2,3-dibromopropionate, 99% 3674-13-3
Lithium bis(trimethylsilyl)amide, 0.9M solution in methylcyclohexane 100-41-4
Silicagel, functionalized, 20% Potassium permanganate 7631-86-9
2-N-methyl-2-pyridylaminoethanol 122321-04-4
Silicagel, functionalized, 10% silver nitrate 7631-86-9
4-Bromobenzenediazonium tetrafluoroborate 673-40-5
Ethyl isovalerate, 99% 108-64-5
Acid yellow 11 6359-82-6
Silicagel, functionalized, Diphenylphosphinoethyl, 0.7 mmol/g 607-01-2
2-Aminobenzophenone-2'-carboxylic acid 1147-43-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net