Search   
MSDS 
:
 4-Bromobenzenediazonium tetrafluoroborate
CAS 
:
 673-40-5
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 673-40-5 |4-Bromobenzenediazonium tetrafluorobor| | 211-608-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 20/21/22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed. Causes
burns.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Harmful if absorbed through the skin. Causes skin burns.
Ingestion:
Harmful if swallowed. Causes gastrointestinal tract burns.
Inhalation:
Harmful if inhaled. Causes chemical burns to the respiratory tract.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Keep refrigerated. (Store below
4C/39F.) Store in a tightly closed container. Corrosives area.
Store under nitrogen.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 673-40-5:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: tan
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 135 deg C(decom)
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: >100 deg C
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C6H4BrN2.BF4
Molecular Weight: 270.82

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Moisture sensitive.
Conditions to Avoid:
Incompatible materials, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, hydrogen fluoride
gas, hydrogen bromide, boron oxides.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 673-40-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Bromobenzenediazonium tetrafluoroborate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, TOXIC, N.O.S.*
Hazard Class: 8 (6.1)
UN Number: 2923
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, TOXIC, N.O.S.
Hazard Class: 8 (6.1)
UN Number: 2923
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE SOLID, TOXIC, N.O.S.
Hazard Class: 8 (6.1)
UN Number: 2923
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 673-40-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 673-40-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 673-40-5 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/20/2004 Revision #0 Date: Original.

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Chloro-1,3-benzenedithiol 58593-78-5
3,5-Dichloronitrobenzene, 98% 618-62-2
3,5-Dinitroaniline 618-87-1
Sand, Sea Washed 14808-60-7
9H-Fluorene-1-carboxylic acid 6276-03-5
Trifluoroacetic acid lithium salt monohydrate, 95% 0-01-1
3-Methyladenine 5142-23-4
3-(1,3-Dioxan-2-yl)aniline 168551-56-2
Fluoroboric Acid 7732-18-5
4-(4-Methyl-4H-1,2,4-triazol-3-yl)aniline 0-01-1
3-Chloropropyl-N-benzylmethylamine 3161-52-2
2-Phenoxyaniline 2688-84-8
4'-Methyl-4-biphenylcarboxylic acid 720-73-0
Methyl 4'-methylbiphenyl-4-carboxylate 49742-56-5
4,4'-Dimethyl-2,2'-bipyridyl 1134-35-6
4-Bromo-2-fluorobiphenyl 41604-19-7
4'-Cyanoacetanilide 35704-19-9
4-(2-Hydroxyethoxy)benzaldehyde 22042-73-5
2,6-Dichlorocinnamic Acid, 99%, Predominantly Trans 5345-89-1
Tetramethylsilane, 99% 75-76-3
Benzenethionosulfonic acid, sodium salt 1887-29-2
1-Benzyl-3-hydroxy-1h-indazole 2215-63-6
2-Chlorobenzyl mercaptan 39718-00-8
2-Chlorophenyl acetate 4525-75-1
Caprylic/Capric/Stearic triglyceride 0-01-1
2-Methylindole-3-carboxaldehyde 5416-80-8
Tri-n-propylaluminium, 0.7M solution in heptane 102-67-0
Tri-n-butylaluminium, 0.7m solution in heptane 142-82-5
Diisobutylaluminium chloride, 0.6M solution in heptane 142-82-5
Dimethylaluminium chloride, 0.9M solution in heptane 142-82-5
Ethylaluminium sesquichloride, 0.4M solution in hexane 110-54-3
Bis(cyclopentadienyl)dimethyltitanium, 5 wt% solution in toluene 108-88-3
1,1,1-Trifluoro-3-phenyl-2-propanone 350-92-5
2-Fluoro-4-methoxybenzaldehyde 331-64-6
2-Fluoro-5-methoxybenzaldehyde 105728-90-3
2-Bromo-4-fluorobenzotrifluoride 351003-21-9
Fluoroacetone 430-51-3
4-Isopropylbenzenesulfonyl chloride, 95% 54997-90-9
Lithium tert-butoxide, 2.2m solution in thf 109-99-9
Silicagel, functionalized, 4-Bromophenyl, 1 mmol/g 108-86-1
Ethyl 2,3-dibromopropionate, 99% 3674-13-3
Lithium bis(trimethylsilyl)amide, 0.9M solution in methylcyclohexane 100-41-4
Silicagel, functionalized, 20% Potassium permanganate 7631-86-9
2-N-methyl-2-pyridylaminoethanol 122321-04-4
Silicagel, functionalized, 10% silver nitrate 7631-86-9
4-Bromobenzenediazonium tetrafluoroborate 673-40-5
Ethyl isovalerate, 99% 108-64-5
Acid yellow 11 6359-82-6
Silicagel, functionalized, Diphenylphosphinoethyl, 0.7 mmol/g 607-01-2
2-Aminobenzophenone-2'-carboxylic acid 1147-43-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net