Search   
MSDS 
:
 Undecylenic aldehyde, 97%
CAS 
:
 112-45-8
SYNONYMS 
:
 10-Undecenal; 10-Undecen-1-al; Aldehyde C-11, undecylenic; C-11     Aldehyde, undecylenic; Hendecenal; 1-Undecen-10-al;     10-Undecylenaldehyde; Undecylenaldehyde
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 112-45-8 |Undecylenic aldehyde | 97 | 203-973-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis.
Skin:
Causes mild skin irritation. May cause cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
May cause respiratory tract irritation. Aspiration may lead to
pulmonary edema. May cause irritation of the mucous membranes.
Inhalation at high concentrations may cause CNS depression and
asphixiation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Containers may explode when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. This material is
lighter than water and insoluble in water. The fire could easily be
spread by the use of water in an area where the water cannot be
contained. Use water spray, dry chemical, carbon dioxide, or
appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Remove all sources of ignition. Absorb spill using an absorbent,
non-combustible material such as earth, sand, or vermiculite. Do not
use combustible materials such as sawdust. Use a spark-proof tool.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Avoid contact
with eyes, skin, and clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Avoid
ingestion and inhalation. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames. Do not breathe vapor.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry
area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 112-45-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: rose-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 101-103 deg C @ 10 mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 76 deg C ( 168.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: insoluble
Specific Gravity/Density: .8100g/cm3
Molecular Formula: C11H20O
Molecular Weight: 168.28

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong reducing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, acrid smoke and fumes.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 112-45-8: YQ2835000
LD50/LC50:
CAS# 112-45-8: Draize test, rabbit, skin: 500 mg/24H Mild; Oral,
rat: LD50 = >5 gm/kg; Skin, rabbit: LD50 = >5 gm/kg.
Carcinogenicity:
Undecylenic aldehyde -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 112-45-8: No information available.
Canada
CAS# 112-45-8 is listed on Canada's DSL List.
CAS# 112-45-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 112-45-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/15/1999 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Niobocene dichloride 12793-14-5
4,4-Diethoxy-2-butyn-1-al, 97+% (GC) 74149-25-0
Beta-(1,4)-2-Amino-2-Deoxy-D-Glucose 9012-76-4
9,10-Anthracenedicarbonitrile, 99% (UV-Vis) 1217-45-4
alpha-Hydroxyacetophenone, 97% 582-24-1
Cyclopentyl chloride, 99+% 930-28-9
5'-O-Dimethoxytrityl-N-Benzoyl-Desoxycyti-Dine 67219-55-0
4,4,4-Trifluoro-1-phenyl-1,3-butanedione 326-06-7
6-Ethyl-O-Toluidine, 98+% 24549-06-2
2-Phenylindolizine, 99+% 25379-20-8
2-Methyl-3-Buten-2-Ol, 97% 115-18-4
1,3,5-Triacetylbenzene, 98% 779-90-8
Propylamine Hydrochloride, 99+% 556-53-6
3,5-Dinitrosalicylic Acid, 98% 609-99-4
2-Methyl-3-Butyn-2-Ol, 98% 115-19-5
Coumarin 307, laser grade, 98% (uv-vis) 55804-70-1
Calcium Fluoride, 99.99% 7789-75-5
1,3-Dichloro-2-propanol, 99% 96-23-1
1,2:3,5-Di-O-Isopropylidene-Alpha-D-Xylofuranose, 98% 20881-04-3
3,5-Dimethoxybenzoyl chloride, ca. 92%, balance is corresponding acid 17213-57-9
(-)-alpha-Pinene, 98% 7785-26-4
2-Methyl-3-pentanol, 99+% 565-62-8
Mem Chloride, 94-98%(GC) 3970-21-6
Ethyl Crotonate, 96% 623-70-1
2,4-Dinitrophenol, moistened with up to 35% water 51-28-5
2-(Phenylthio)Ethanol, 99% 699-12-7
1-Anthraquinonesulfonic Acid Sodium Salt (Pract), Containing up to 128-56-3
4-(4-Biphenylyl)-2-Methylthiazole, 97% 24864-19-5
4,4'-Dithiodipyridine, 98% 2645-22-9
1-Pentanethiol, 98% 110-66-7
3-Methylsulphonylbenzoic Acid, 95+% 5345-27-7
Hexyl sodium sulfate, pract., 98% 2207-98-9
3-Benzyloxybenzaldehyde,98% 1700-37-4
(s)-3-Butene-1,2-diol, 99% (gc) 62214-39-5
N,N-Dibenzylhydroxylamine, 98% 621-07-8
5-Iodosalicylic acid, 97% 119-30-2
1-Adamantyl methyl ketone, 99% 1660-04-4
6-Bromo-2-Naphthol, 97% 15231-91-1
Furoin, 98% 552-86-3
Iminostilbene, 97% 256-96-2
(+/-)-Citronellic Acid 502-47-6
1-Ethylpyridinium Bromide, 98% 1906-79-2
5-Norbornene-2-carbonitrile, 98% mixture of endo and exo 95-11-4
Isosorbide-5-Mononitrate, CHR 16051-77-7
2,2,4,5,5-Pentamethyl-3-Imidazoline-3-Oxide-1-Oxyl, Free Radical 18796-04-8
Undecylenic aldehyde, 97% 112-45-8
Lumazine, 98% 487-21-8
3-Fluorobenzoic Acid, 99% 455-38-9
2-(Bromomethyl)-Naphthalene, 96% 939-26-4
2,4-Dihydroxy-5,6-Dimethylpyrimidine 97% 26305-13-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net