Search   
MSDS 
:
 Tris-(2-Chloroethyl) Phosphate, 97%
CAS 
:
 115-96-8
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 115-96-8 |Tris(2-Chloroethyl) Phosphate | 97 | 204-118-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22 36/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Irritating to eyes and skin.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. May be harmful if swallowed.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Vapors may be heavier
than air. They can spread along the ground and collect in low or
confined areas. Containers may explode when heated.
Extinguishing Media:
Cool containers with flooding quantities of water until well after
fire is out. Use water spray, dry chemical, carbon dioxide, or
appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Avoid ingestion and inhalation. Use with
adequate ventilation. Wash clothing before reuse.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 115-96-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear very light yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: 0.5 mmHg @ 145
Viscosity: 38 cP 25.00 deg C
Boiling Point: 330 deg C @ 760.00mm Hg
Freezing/Melting Point: -51 deg C
Autoignition Temperature: 480 deg C ( 896.00 deg F)
Flash Point: 150 deg C ( 302.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 150 deg C
Solubility in water: 7 g/l (20 c)
Specific Gravity/Density: 1.3900g/cm3
Molecular Formula: C6H12Cl3O4P
Molecular Weight: 285.48

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of phosphorus, irritating
and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 115-96-8: KK2450000
LD50/LC50:
CAS# 115-96-8: Oral, mouse: LD50 = 1866 mg/kg; Oral, rat: LD50 =
1230 mg/kg.
Carcinogenicity:
Tris(2-Chloroethyl) Phosphate -
California: carcinogen, initial date 4/1/92
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
R 36/38 Irritating to eyes and skin.
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 115-96-8: 2
Canada
CAS# 115-96-8 is listed on Canada's DSL List.
CAS# 115-96-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 115-96-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/11/1998 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Tris-(2-Chloroethyl) Phosphate, 97% 115-96-8
6-Methylcoumarin, 99+% 92-48-8
Polystyrene: 1% Divinylbenzene Copolymer Beads, 200-400 Mesh 1321-74-0
Tri-P-Tolyl Phosphite, Tech., 90% (GC) 620-42-8
3-(3-(2-Bromoacetamido)propylcarbamoyl)- proxyl, free radical 100900-11-6
1,3-Dicyanobenzene 98% 626-17-5
Sulfabenzamide, 98.5% 127-71-9
2,4-Dinitro-N-Ethylaniline, 97% 3846-50-2
Citraconic Anhydride 98% 616-02-4
1-Chloro-2-Iodobenzene, 99% 615-41-8
Acid Alizarin Violet N 2092-55-9
8-Azaxanthine Monohydrate, 98% 1468-26-4
Sec-Butyl Acetate, 97% (gc) 105-46-4
AMINODIPHENYLMETHANE, TECH., 90% 91-00-9
D(+)-Tryptophan, 99+% 153-94-6
3-Fluorostyrene, 97% 350-51-6
4-Octyne, 99% 1942-45-6
Lawesson's Reagent, 99% 19172-47-5
Benzimidazo(1,2-c)quinazoline-6-thiol, 98% 24192-82-3
Piperylene, tech., 60%, cis and trans isomers 504-60-9
3,3'-Diaminodipropylamine, 99% (GC) 56-18-8
Chlorophenol Red, water soluble 123333-64-2
Cadmium carbonate, 99.999% 513-78-0
1,3-Dimethyl-5-Pyrazolone, 97% 2749-59-9
Aluminum sulfate hexadecahydrate, p.a. 10043-01-3
4,4'-bis(4-amino-1-naphthylazo)-2,2'- stilbenedisulfonic acid, 5463-64-9
5-Chloro-2-Hydroxyaniline, 97% 95-85-2
2-(2-Nitrophenyl)Malondialdehyde, 95+% (NMR) 53868-44-3
4-Methylbenzyl Cyanide, 98% 2947-61-7
2',5'-Dichloroacetophenone, 96% 2476-37-1
Iron atomic absorption standard solution, 1 mg/ml Fe in 2% HNO3 7439-89-6
Phenylselenol, 98% (gc) 645-96-5
8-Hydroxyquinoline sulfate monohydrate, 98% 207386-91-2
6-Amino-3,4-Methylenedioxyacetophenone 99+% (GC) 28657-75-2
2-Mercapto-1-methylimidazole, 98% 60-56-0
1,2-(Methylenedioxy)-4-Nitrobenzene, 98% 2620-44-2
beta-Butyrolactone, 98+% 3068-88-0
Aluminum acetylacetonate, 97+% 13963-57-0
3-Amino-4-chlorobenzoic acid, 98% 2840-28-0
4-Amino-2-chlorobenzoic acid, 97% 2457-76-3
Calcium hypochlorite tetrahydrate, reagent (crystals), 98% (titr.) 13477-32-2
2-Nitro-1-Naphthol,98% 607-24-9
DL-Leucine, 98% (Titr.) 328-39-2
n-Acetyl-l-alanyl-l-alanyl-l-alanine 19245-85-3
Xylitol, 99+%(gc) 87-99-0
Coumarin 102, Laser Grade, 99% (UV-VIS) 41267-76-9
Dexamethasone, 96% 50-02-2
2,2-Dichlorohexanoic acid, 93% 18240-70-5
2,2-Diethoxyacetonitrile, 98% 6136-93-2
3,4,5-Triethoxybenzoic Acid, 97+% 6970-19-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net