Search   
MSDS 
:
 n-Octanoic acid
CAS 
:
 124-07-2
SYNONYMS 
:
 Caprylic acid, octic acid, n-octoic acid, n-octylic acid
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 124-07-2 |Octanoic acid | 99% | 204-677-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin burns. Causes severe skin
irritation and burns. May cause skin rash (in milder cases), and
cold and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
Dust is irritating to the respiratory tract. Causes chemical burns
to the respiratory tract. Aspiration may cause respiratory swelling
and pneumonitis. Causes irritation of mucous membrane. Aspiration may
lead to pulmonary edema. May cause systemic effects.
Chronic:
Chronic inhalation may cause effects similar to those of acute
inhalation. Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Possible aspiration hazard. Get medical aid
immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas. May accumulate static electrical charges,
and may cause ignition of its own vapors.
Extinguishing Media:
Water may be ineffective. Use water spray, dry chemical, carbon
dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Do not get in
eyes, on skin, or on clothing. Keep container tightly closed. Do not
ingest or inhale. Use with adequate ventilation. Discard contaminated
shoes.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 124-07-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Follow the OSHA
respirator regulations found in 29 CFR 1910.134 or
European Standard EN 149. Use a NIOSH/MSHA or
European Standard EN 149 approved respirator if
exposure limits are exceeded or if irritation or
other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: after melting, clear slightly yellow
Odor: Slightly unpleasant & irritating odor
pH: Not available.
Vapor Pressure: 0.05 hPa @ 20 C
Viscosity: mPas 20 deg C
Boiling Point: 237 deg C @ 760.00mm Hg
Freezing/Melting Point: 16 - 16.5 deg C
Autoignition Temperature: 440 deg C ( 824.00 deg F)
Flash Point: 130 deg C ( 266.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble in alcohol and ether
Specific Gravity/Density: .9100g/cm3
Molecular Formula: C8H16O2
Molecular Weight: 144.21

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. Forms explosive
mixtures with air (56F/13C).
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, acrid smoke and fumes.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 124-07-2: RH0175000
LD50/LC50:
CAS# 124-07-2: Draize test, rabbit, skin: 500 mg/24H Moderate; Oral,
rat: LD50 = 10080 mg/kg; Skin, rabbit: LD50 = >5 gm/kg.
Carcinogenicity:
Octanoic acid -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Red killifish: LC50 = 57 mg/L; 96 Hr.; Unspecified

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, NOS
Hazard Class: 8
UN Number: 1760
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, NOS
Hazard Class: 8
UN Number: 1760
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE LIQUID, NOS
Hazard Class: 8
UN Number: 1760
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 124-07-2: 1
Canada
CAS# 124-07-2 is listed on Canada's DSL List.
CAS# 124-07-2 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 124-07-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/17/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ruthenium Trichloride 10049-08-8
4-(2-Pyridylazo)-Resorcinol Mono-Sodium Salt 16593-81-0
Polyethylene Glycol 6000 25322-68-3
Polyethylene Glycol 4000 25322-68-3
Polyethylene Glycol 1500 25322-68-3
Methyl 4-Methoxyacetoxyacetate,98% 41051-15-4
Polyethylene Glycol 1000 25322-68-3
1-Propyl-4-piperidone, 96% 23133-37-1
4,4'(5')-Dibromodibenzo-18-Crown-6, 98% 0-00-1
Polyethylene Glycol 600 25322-68-3
Polyethylene Glycol 400 25322-68-3
Polyethylene Glycol 200 25322-68-3
Propane Sulfonic Acid Sodium Salt Monohydrate 14533-63-2
FisherBrand General Purpose Cleaner 111-76-2
Propiophenone 93-55-0
Potassium Tetraborate Tetrahydrate 12045-78-2
Potassium (+) Tartrate 921-53-9
Potassium Pyrosulfate 7790-62-7
n-Octanoic acid 124-07-2
Oxalic acid, anhydrous 144-62-7
Oxalic acid, dihydrate 144-62-7
n-Octane 111-65-9
1-Naphthol 90-15-3
1,2-Naphthoquinone-4-Sulfonic Acid Sodium Salt 521-24-4
Procaine Hydrochloride 51-05-8
Potassium tetroxalate dihydrate 6100-20-5
2-Naphthalenesulfonic acid sodium salt 532-02-5
Potassium Tetrachloroplatinate (II) 10025-99-7
Tetrabutylammonium Cyanoborohydride, 98% 43064-96-6
Naphtha solvent 8030-30-6
2-Naphthol 135-19-3
Potassium Oxalate 583-52-8
Pyridinium Chloride 628-13-7
Propionic Anhydride 123-62-6
3,3'-Diaminobenzidine tetrahydrochloride, dihydrate, 98% 7411-49-6
Iso-Propyl Acetate 108-21-4
N-Propyl Acetate 109-60-4
Nickel (II) bromide, anhydrous 13462-88-9
N-Propylamine 107-10-8
Nickel (II) acetate 373-02-4
Iso-Propylamine 75-31-0
Propionaldehyde 123-38-6
Potassium Fluoride Anhydrous 7789-23-3
Potassium Fluoride Hydrated 13455-21-5
Tri-Potassium Citrate 866-84-2
Potassium Borohydride 13762-51-1
Potassium Antimonate, Trihydrate 82457-76-9
Nickel-Aluminum Alloy Powder 7429-90-5
Ponceau 2R 3761-53-3
Polypropylene Glycol, Avg. M.W. 1200 25322-69-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net