**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 13517-06-1 |Sodium iodide dihydrate | 99+ | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Air sensitive.Moisture sensitive.Light sensitive.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
May cause skin irritation. May cause skin sensitization, an allergic
reaction, which becomes evident upon re-exposure to this material.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea. Ingestion may produce hypersensitivity characterized by:
fever, arthralgia, lymph node enlargement and thrombocytopenia.
Inhalation:
May cause respiratory tract irritation. Irritation may lead to
chemical pneumonitis and pulmonary edema.
Chronic:
Prolonged or repeated exposure may cause adverse reproductive
effects. Chronic exposure can lead to iodism characterized by
salivation, nasal discharge, sneezing, conjunctivitis, fever,
laryngitis, bronchitis, stomatitis, and skin rashes. May cause fetal
effects.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Material will not burn.
Extinguishing Media:
For small fires, use water spray, dry chemical, carbon dioxide or
chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation.
Storage:
Store in a cool place in the original container and protect from
sunlight. Store in a tightly closed container.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 13517-06-1:
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Solid
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 752 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble
Specific Gravity/Density: 2.4480g/cm3
Molecular Formula: INa.2H2O
Molecular Weight: 185.93
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, exposure to air, contact with water,
strong oxidants.
Incompatibilities with Other Materials:
Incompatible with potassium iodide, oxidants, bromine trifluoride,
alkaloidal salts, perchloric acid
Hazardous Decomposition Products:
Hydrogen iodide, sodium oxide, iodine.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 13517-06-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Sodium iodide dihydrate -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
Ecotoxicity:
This chemical is expected to cause little oxygen depletion in aquatic
systems. This chemical has a low to moderate potential to affect
aquatic organisms. Acute aquatic effects: 96-hour LC50; Fathead
minnow: 3200 ng/L 96-hour LC50; Water flea: 3.3 mg/L (caused
immobilization of test animal) 48-hour LC50; Golden orfe (minnow): GT
10,000 mg/L.
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 13517-06-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 13517-06-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 13517-06-1 is not listed on the TSCA inventory.
It is for research and development use only.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/02/1997 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
1-Acetyl-4-methyl-2,5-dihydro-1h-pyrrol-2-one, 97%
| 34581-92-5 |
|
Ethyl 4-acetyl-3,5-dimethyl-1h-pyrrole-2-carboxylate, 97%
| 2386-26-7 |
|
N2,N2-Diethyl-3,4,5-trimethyl-1H-pyrrole-2-carboxamide, 97%
| 58803-92-2 |
|
2-Methyl-2-[(7-methyl-2,3-dihydro-1H-inden-4-yl)oxy]propanoic acid,
| 175136-07-9 |
|
Triphosphopyridine Nucleotide, Sodium Salt Hydrate
| 1184-16-3 |
|
5-Bromo-4-methoxy-7-methylindane, 97%
| 175136-09-1 |
|
4-Methoxy-7-methylindane-5-carbonitrile, 97%
| 175136-10-4 |
|
2-[(7-Methyl-2,3-dihydro-1H-inden-4-yl)oxy]pyridin-3-amine, 97%
| 175136-11-5 |
|
7-Methyl-2,3-dihydro-1h-inden-4-yl acetate, 97%
| 175136-12-6 |
|
2-Bromo-3-chloro-5-(trifluoromethyl)pyridine, 97%
| 75806-84-7 |
|
Methyl 4-amino-2-methoxybenzoate, 95+%
| 27492-84-8 |
|
2-(4-Chloro-2-methylphenoxy)-3-nitropyridine, 97%
| 465514-31-2 |
|
2-(4-Chloro-3,5-dimethylphenoxy)-3-nitropyridine, 97%
| 246862-63-5 |
|
2-(2,3-Dimethylphenoxy)-3-nitropyridine, 95+%
| 76893-55-5 |
|
6,8-Dibromo-2-oxo-2h-chromene-3-carboxylic acid, 95+
| 3855-87-6 |
|
3-(5-Bromo-2-methyl-4-nitro-1H-imidazol-1-yl)propanenitrile, 97%
| 139975-78-3 |
|
Methyl 2-phenoxynicotinate, 97%
| 36701-88-9 |
|
5-Bromo-2-methyl-4-nitro-1h-imidazole, 97%
| 18874-52-7 |
|
4-(2-Methyl-4-nitro-1h-imidazol-1-yl)butan-2-one, 97%
| 126664-28-6 |
|
4-tert-Butylcatechol, 99%
| 98-29-3 |
|
3-(2-Oxocyclododecyl)propanoic acid, 97%
| 22575-75-3 |
|
2-Heptylcyclopentan-1-one oxime, 97%
| 165385-93-3 |
|
Benzo-12-crown-4, 99+%
| 14174-08-4 |
|
1-(4-Decylphenyl)ethan-1-one, 97%
| 37593-06-9 |
|
1-Bromo-4-butoxybenzene, 97%
| 39969-57-8 |
|
4-Pentylbenzene-1-sulfonyl chloride, 97%
| 73948-18-2 |
|
2-Phenyl ethyl acetate, 98+%
| 103-45-7 |
|
Norharman, 98%
| 244-63-3 |
|
Sodium iodide dihydrate, 99+%
| 13517-06-1 |
|
4-(4-Octylphenyl)-4-oxobutanoic acid, 97%
| 64779-10-8 |
|
Cupferron
| 135-20-6 |
|
4-Oxo-4-(4-propylphenyl)butanoic acid, 97%
| 57821-78-0 |
|
4-(Dihexylamino)benzoic acid, 97%
| 134690-32-7 |
|
4-Propoxybenzonitrile, 97%
| 60758-84-1 |
|
1-(4-Bromophenyl)octane, 97%
| 51554-93-9 |
|
1-(4-Bromophenyl)heptane, 97%
| 76287-49-5 |
|
1-Bromo-4-pentylbenzene, 97%
| 51554-95-1 |
|
2-Bromo-1-[3,5-di(tert-butyl)-4-hydroxyphenyl]ethan-1-one, 90+%
| 14386-64-2 |
|
3,5-Di(tert-butyl)-4-hydroxybenzonitrile, 97%
| 1988-88-1 |
|
1-Eth-1-ynyl-4-(hexyloxy)benzene, 97%
| 79887-17-5 |
|
1,3,5-Triisopropylbenzene, 97%
| 717-74-8 |
|
1-Chloro-2,6-Dibromo-4-Fluorobenzene, 99.5+%
| 0-00-1 |
|
1-Eth-1-ynyl-4-(pentyloxy)benzene, 97%
| 79887-16-4 |
|
1-Butoxy-4-eth-1-ynylbenzene, 97%
| 79887-15-3 |
|
Copper (II) Acetate Monohydrate
| 6046-93-1 |
|
1-Eth-1-ynyl-4-propoxybenzene, 97%
| 39604-97-2 |
|
Copper (II) Bromide
| 7789-45-9 |
|
1-Eth-1-ynyl-4-methoxybenzene, 97%
| 768-60-5 |
|
1-Ethynyl-4-heptylbenzene, 95%
| 79887-12-0 |
|
Copper (II) Carbonate Basic Monohydrate
| 12069-69-1 |
|
|