Search   
MSDS 
:
 Dichloromethylphenylsilane, 96%
CAS 
:
 149-74-6
SYNONYMS 
:
 Phenylmethyldichlorosilane.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 149-74-6 |Methylphenyldichlorosilane | 96 | 205-746-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause irritation and dermatitis. May cause
cyanosis of the extremities. May cause skin rash (in milder cases),
and cold and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. The toxicological properties of this substance have not been
fully investigated. May cause systemic effects.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. The toxicological
properties of this substance have not been fully investigated.
Aspiration may lead to pulmonary edema. May cause systemic effects.
Inhalation at high concentrations may cause CNS depression and
asphixiation.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid. Do NOT allow victim to rub eyes or keep eyes
closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid. Do NOT use mouth-to-mouth
resuscitation. If breathing has ceased apply artificial respiration
using oxygen and a suitable mechanical device such as a bag and a
mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors can travel to a source of ignition and flash
back. During a fire, irritating and highly toxic gases may be
generated by thermal decomposition or combustion. Use water spray to
keep fire-exposed containers cool. Combustible liquid. Contact with
metals may evolve flammable hydrogen gas. Containers may explode
when heated. Substance will react with water (some violently)
releasing flammable, toxic, or corrosive gases and runoff.
Extinguishing Media:
For large fires, use water spray, fog, or alcohol-resistant foam.
Use water spray to cool fire-exposed containers. Do NOT get water
inside containers. Do NOT use straight streams of water. For small
fires, use carbon dioxide, dry chemical, dry sand, or
alcohol-resistant foam. Most foams will react with the material and
release corrosive/toxic gases. For fires involving chlorosilanes, an
aqueous film forming foam (AFFF) may be used.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid
contact with eyes, skin, and clothing. Do not breathe dust, vapor,
mist, or gas. Do not get in eyes, on skin, or on clothing. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Keep container tightly closed. Keep away from heat,
sparks and flame. Avoid ingestion and inhalation. Discard
contaminated shoes. Do not pressurize, cut, weld, braze, solder,
drill, grind, or expose empty containers to heat, sparks or open
flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 149-74-6:

Russia: 1 mg/m3 TWA

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: chlorine-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 205 deg C @ 760.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: 400 deg C ( 752.00 deg F)
Flash Point: 82 deg C ( 179.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Negligible.
Specific Gravity/Density: 1.1760g/cm3
Molecular Formula: C7H8Cl2Si
Molecular Weight: 191.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Ammonia, strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: May occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 149-74-6: VV3530000
LD50/LC50:
Not available.
Carcinogenicity:
Methylphenyldichlorosilane -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: METHYLPHENYLDICHLOROSILANE
Hazard Class: 8
UN Number: 2437
Packing Group: II
IMO
Shipping Name: METHYLPHENYLDICHLOROSILANE
Hazard Class: 8
UN Number: 2437
Packing Group: II
RID/ADR
Shipping Name: METHYLPHENYLDICHLOROSILANE
Hazard Class: 8
UN Number: 2437
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/39 Wear suitable protective clothing and
eye/face protection.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 149-74-6: No information available.
Canada
CAS# 149-74-6 is listed on Canada's NDSL List.
CAS# 149-74-6 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 149-74-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
5-Chloro-benzo[b]thiophene-3-carboxylic acid 16361-24-3
1H-Indazole-3-carboxylic acid 4498-67-3
2-(1H-Pyrrol-1-yl)benzoic acid 10333-68-3
3-(2-Methylpyrimidin-4-yl)aniline 175201-90-8
Heptane 108-87-2
Imidazo[1,2-a]pyridine-2-carboxylic acid 64951-08-2
5-(2-Furyl)isoxazole-3-carboxylic acid 98434-06-1
(4-Thien-2-ylphenyl)methanol 81443-44-9
2-[4-(Bromomethyl)phenyl]thiophene
2-Bromo-1-[4-(2-thienyl)phenyl]-1-ethanone 128746-80-5
4-Piperidinobenzoic acid 22090-24-0
2-Aminoethylphosphonic Acid, 99% 2041-14-7
5-Bromobenzo[b]furan-2-carboxylic acid 10242-11-2
Ethyl 3,5-dimethyl-1H-4-pyrazolecarboxylate 35691-93-1
5-Bromobenzo[b]furan-2-carbaldehyde 23145-16-6
Benzyl 4-(aminocarbonyl)tetrahydro-1(2H)-pyridinecarboxylate 167757-45-1
Isoquinoline-4-boronic acid 2,2-dimethylpropanediol-1,3 cyclic ester
4-Amino-3-(trifluoromethoxy)benzonitrile 175278-23-6
3-(2-Methyl thiazol-4-yl)-benzoyl chloride
1-Tetradecylamine, 98% 2016-42-4
3-(2-Methyl-1,3-thiazol-4-yl)benzonitrile 844891-06-1
1-(2-Bromophenyl)-1H-pyrazole 87488-84-4
tert-Butyl 4-(4-bromobenzyl)piperazine-1-carboxylate 0-01-1
tert-Butyl 4-[3-(methoxycarbonyl)benzyl]piperazine-1-carboxylate 203047-36-3
tert-Butyl 4-(3-nitrobenzyl)tetrahydro-1(2H)-pyrazinecarboxylate 203047-33-0
(4-Methyl-2-thienyl)methylamine 104163-39-5
Malonaldehyde bis(dimethyl acetal), 99+% 102-52-3
Ethyl thiomorpholine-3-carboxylate 58729-31-0
Imidazo[1,2-a]pyridine-3-carboxylic acid 6200-60-8
1-(3-Furyl)methanamine hydrochloride 131052-43-2
5-Bromobenzo[b]furan-2-carbonyl chloride 62878-96-0
1-(2-Furyl)-1-ethanamine 22095-34-7
(2-Methyl-6-quinolinyl)methanol 108166-02-5
1-(5-Bromo-1-benzothien-3-yl)ethanone 1423-63-8
2,2-Dioxo-1,3-dihydrobenzo[c]thiophene-5ylamine 70654-85-2
4-Bromobenzyl Alcohol, 99% 873-75-6
Isonicotinic Acid N-Oxide, 99% 13602-12-5
2-Bromobenzyl Bromide (A,O-Dibromotoluene) , 98% 3433-80-5
2-Cyanoethyl Ether, Tech. 90% 1656-48-0
Octanoyl chloride, 99% 111-64-8
Dichloromethylphenylsilane, 96% 149-74-6
Hexadecyltrimethylammonium bromide 57-09-0
(R)-(-)-1-Methyl-3-Phenylpropylamine 937-52-0
Dansylamide, 99% 1431-39-6
Phenolphthalein Diphosphate, 95% (Titr.) 2090-82-6
Colchicine 97% 64-86-8
2-Aminofluorene, 98% 153-78-6
2,6-Dibromo-4-Fluoroaniline, 98% 344-18-3
4'-Bromo-2'-methylacetanilide, 99+% 24106-05-6
Isopropyl Nitrate 1712-64-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net