Search   
MSDS 
:
 1-Tetradecylamine, 98%
CAS 
:
 2016-42-4
SYNONYMS 
:
 1-Aminotetradecane; Monotetradecylamine; Myristylamine.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2016-42-4 |1-Tetradecylamine | 98 | 217-950-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
May cause severe eye irritation. Causes eye irritation.
Skin:
Causes skin irritation. Amines have been known to cause skin
irritation and sensitization. No skin absorption data found.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation. Material has a low vapor
pressure, so exposure to vapor is not likely.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water.
Remove contaminated clothing and shoes. Get medical aid. Wash
clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Contact
with metals may evolve flammable hydrogen gas. Runoff from fire
control or dilution water may cause pollution.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, or water spray.
For large fires, use dry chemical, carbon dioxide, alcohol-resistant
foam, or water spray.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Remove contaminated clothing and wash before reuse. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Use with adequate
ventilation. Avoid breathing vapor.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 2016-42-4:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: fish-like
pH: Not available.
Vapor Pressure: .001 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 291 deg C @ 760mmHg
Freezing/Melting Point: 83 deg C
Autoignition Temperature: Not applicable.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density: 0.993
Molecular Formula: C14H31N
Molecular Weight: 213.41

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
Acid chlorides, acid anhydrides, strong oxidizing agents, strong
acids, aluminum.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2016-42-4: XB7970000
LD50/LC50:
Not available.
Carcinogenicity:
1-Tetradecylamine -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Amines, Solid, Corrosive, N.O.S.
Hazard Class: 8
UN Number: 3259
Packing Group: III
IMO
Shipping Name: Amines, Solid, Corrosive, N.O.S.
Hazard Class: 8
UN Number: 3259
Packing Group: III
RID/ADR
Shipping Name: Amines, Solid, Corrosive, N.O.S.
Hazard Class: 8
UN Number: 3259
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 2016-42-4: No information available.
Canada
CAS# 2016-42-4 is listed on Canada's NDSL List.
CAS# 2016-42-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2016-42-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 5/16/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
5-Chloro-benzo[b]thiophene-3-carboxylic acid 16361-24-3
1H-Indazole-3-carboxylic acid 4498-67-3
2-(1H-Pyrrol-1-yl)benzoic acid 10333-68-3
3-(2-Methylpyrimidin-4-yl)aniline 175201-90-8
Heptane 108-87-2
Imidazo[1,2-a]pyridine-2-carboxylic acid 64951-08-2
5-(2-Furyl)isoxazole-3-carboxylic acid 98434-06-1
(4-Thien-2-ylphenyl)methanol 81443-44-9
2-[4-(Bromomethyl)phenyl]thiophene
2-Bromo-1-[4-(2-thienyl)phenyl]-1-ethanone 128746-80-5
4-Piperidinobenzoic acid 22090-24-0
2-Aminoethylphosphonic Acid, 99% 2041-14-7
5-Bromobenzo[b]furan-2-carboxylic acid 10242-11-2
Ethyl 3,5-dimethyl-1H-4-pyrazolecarboxylate 35691-93-1
5-Bromobenzo[b]furan-2-carbaldehyde 23145-16-6
Benzyl 4-(aminocarbonyl)tetrahydro-1(2H)-pyridinecarboxylate 167757-45-1
Isoquinoline-4-boronic acid 2,2-dimethylpropanediol-1,3 cyclic ester
4-Amino-3-(trifluoromethoxy)benzonitrile 175278-23-6
3-(2-Methyl thiazol-4-yl)-benzoyl chloride
1-Tetradecylamine, 98% 2016-42-4
3-(2-Methyl-1,3-thiazol-4-yl)benzonitrile 844891-06-1
1-(2-Bromophenyl)-1H-pyrazole 87488-84-4
tert-Butyl 4-(4-bromobenzyl)piperazine-1-carboxylate 0-01-1
tert-Butyl 4-[3-(methoxycarbonyl)benzyl]piperazine-1-carboxylate 203047-36-3
tert-Butyl 4-(3-nitrobenzyl)tetrahydro-1(2H)-pyrazinecarboxylate 203047-33-0
(4-Methyl-2-thienyl)methylamine 104163-39-5
Malonaldehyde bis(dimethyl acetal), 99+% 102-52-3
Ethyl thiomorpholine-3-carboxylate 58729-31-0
Imidazo[1,2-a]pyridine-3-carboxylic acid 6200-60-8
1-(3-Furyl)methanamine hydrochloride 131052-43-2
5-Bromobenzo[b]furan-2-carbonyl chloride 62878-96-0
1-(2-Furyl)-1-ethanamine 22095-34-7
(2-Methyl-6-quinolinyl)methanol 108166-02-5
1-(5-Bromo-1-benzothien-3-yl)ethanone 1423-63-8
2,2-Dioxo-1,3-dihydrobenzo[c]thiophene-5ylamine 70654-85-2
4-Bromobenzyl Alcohol, 99% 873-75-6
Isonicotinic Acid N-Oxide, 99% 13602-12-5
2-Bromobenzyl Bromide (A,O-Dibromotoluene) , 98% 3433-80-5
2-Cyanoethyl Ether, Tech. 90% 1656-48-0
Octanoyl chloride, 99% 111-64-8
Dichloromethylphenylsilane, 96% 149-74-6
Hexadecyltrimethylammonium bromide 57-09-0
(R)-(-)-1-Methyl-3-Phenylpropylamine 937-52-0
Dansylamide, 99% 1431-39-6
Phenolphthalein Diphosphate, 95% (Titr.) 2090-82-6
Colchicine 97% 64-86-8
2-Aminofluorene, 98% 153-78-6
2,6-Dibromo-4-Fluoroaniline, 98% 344-18-3
4'-Bromo-2'-methylacetanilide, 99+% 24106-05-6
Isopropyl Nitrate 1712-64-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net