Search   
MSDS 
:
 Ammonium hexachloroplatinate(IV), 99.999%
CAS 
:
 16919-58-7
SYNONYMS 
:
 Ammonium chloroplatinate; Ammonium platinic chloride; Diammonium     hexachloroplatinate; Diammonium hexachloroplatinate(2-);     Platinate(2-), hexachloro-, diammonium, (OC-6-11)-; Platinic ammonium     chloride; Quaternium-17
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 16919-58-7 |Ammonium hexachloroplatinate(IV) | 99.999 | 240-973-0 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 25 40

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic if swallowed. Limited evidence of a carcinogenic effect.Toxic.

Potential Health Effects
Eye:
Causes eye irritation. Lachrymator (substance which increases the
flow of tears).
Skin:
May cause irritation and dermatitis. May cause sensitization by skin
contact.
Ingestion:
Harmful if swallowed. May cause gastrointestinal irritation with
nausea, vomiting and diarrhea.
Inhalation:
May be fatal if inhaled. May cause pulmonary fibrosis and permanent
damage. May cause respiratory sensitization.
Chronic:
Repeated exposure may cause sensitization dermatitis. Chronic
inhalation may cause pulmonary emphysema. Chronic inhalation may
cause pulmonary fibrosis.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do not use
mouth-to-mouth resuscitation if victim ingested or inhaled the
substance; induce artificial respiration with the aid of a pocket
mask equipped with a one-way valve or other proper respiratory
medical device.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Avoid generating dusty conditions. Absorb spill
using an absorbent, non-combustible material such as earth, sand, or
vermiculite. Do not use combustible materials such as sawdust.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Do not get in eyes, on skin, or on clothing. Keep
container tightly closed. Use only in a chemical fume hood. Do not
breathe dust.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 16919-58-7:
United States OSHA: 0.002 mg/m3 TWA (as Pt) (listed under Platin
soluble salts).
Belgium - TWA: (listed as platinum soluble salts): 0.002 mg/m3 VL
(as Pt)
Japan: (listed as platinum soluble salts): 0.001 mg/m3 OEL (as Pt
Malaysia: (listed as platinum soluble salts): 0.002 mg/m3 TWA (as
Netherlands: (listed as platinum soluble salts): 0.002 mg/m3 MAC
Pt)
Russia: 0.005 mg/m3 TWA

Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to
prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: decomposes
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: 0.7g/100ml (15 C)
Specific Gravity/Density: 3.0650g/cm3
Molecular Formula: H8Cl6N2Pt
Molecular Weight: 443.89

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. Dusts may form an
explosion hazard. Boiling with potassium hydroxide yields a product
that, after drying, explodes at 205C or when mixed with combustible
materials.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Alkalies, potassium hydroxide.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, ammonia and/or derivatives,
nitrogen, chloride fumes.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 16919-58-7: BP5425000
LD50/LC50:
CAS# 16919-58-7: Oral, rat: LD50 = 195 mg/kg.
Inhalation, rat: LC = 365
Carcinogenicity:
Ammonium hexachloroplatinate(IV) -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: TOXIC SOLID, INORGANIC, N.O.S.*
Hazard Class: 6.1
UN Number: 3288
Packing Group: III
IMO
Shipping Name: TOXIC SOLID, INORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 3288
Packing Group: III
RID/ADR
Shipping Name: TOXIC SOLID, INORGANIC, N.O.S.
Hazard Class: 6.1
UN Number: 3288
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 25 Toxic if swallowed.
R 40 Limited evidence of a carcinogenic effect.
Safety Phrases:
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 16919-58-7: 2
Canada
CAS# 16919-58-7 is listed on Canada's DSL List.
CAS# 16919-58-7 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 16919-58-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Fluorobenzene, 99% 462-06-6
2-Mercaptopyridine, 99% 2637-34-5
DL-4-Hydroxy-3-Methoxyphenylglycol Piperazine Salt, 99% 67423-45-4
4'-Aminopropiophenone, 99% (Titr.) 70-69-9
2-Nitro-5-Thiocyanatobenzoic Acid, 98% (Titr.) 30211-77-9
1-Eicosanol, 98% 629-96-9
Lithium bis(trimethylsilyl)amide, 1.3M solution in THF 109-99-9
Methyl 4,4-Dimethyl-3-Oxovalerate, 98% (GC) 55107-14-7
Ruthenocene 1287-13-4
2,4-Dinitrobenzaldehyde, 97% 528-75-6
4-Nonylphenol, 99% (GC), Mixture of Isomers 104-40-5
Cis-1,2-Dihydro-3-Methylcatechol, 20w/v % Soln. in Ethyl Acetate, 141-78-6
4-Hydroxy-3-Methoxybenzoic Acid, 98.5+% (HPLC) 121-34-6
4-Methyl-2,3,5,6-tetrafluorothiophenol 98+% (GC) 13634-89-4
gamma-Cyclodextrin hydrate, 99% (hplc) 17465-86-0
Ammonium hexachloroplatinate(IV), 99.999% 16919-58-7
20-(Hydroxymethyl)pregna-1,4-dien-3-one, 95% 35525-27-0
N,N-Dimethylguanidine sulfate 598-65-2
(Bromomethyl)cyclopropane, 90% 7051-34-5
2-Acetyl-3-methylpyrazine, 98+% 23787-80-6
2-Chloro-5-Nitrobenzaldehyde, 99+% (GC) 6361-21-3
O-Cresolphthalein, Indicator Grade, 98% (UV) 596-27-0
3-Nitrophenylacetic acid, 99% 1877-73-2
Diaza-18-Crown-6, 98% 23978-55-4
5-(2-Bromophenyl)-1h-tetrazole 73096-42-1
4-Chlorophenyl 2,3-Epoxypropyl Ether, 99% 2212-05-7
Benzoyloxyethylchloromethylether, Tech. 85%, Balance mainly 0-00-1
Cholesteryl Oleate, 99+% (TLC) 303-43-5
Leuco Crystal Violet, 99% 603-48-5
bis(Acetato-o)(3-methoxyphenyl)iodine 69180-50-3
2,6-Dichloro-3-Nitropyridine, Tech., 90% 16013-85-7
Trimethylsilyl Bromoacetate, 98% 18291-80-0
3-Aminocrotononitrile, 96-99%(Titr.) 1118-61-2
Magnesium atomic absorption standard solution, 1 mg/ml mg in 0.5n
3-Aminoquinoline, 99+% (Titr.) 580-17-6
1,3-bis-(dimethylamino)-2-propanol, 95% 5966-51-8
(S)-(+)-Citramalic Acid, 98+% 6236-09-5
3-Methoxycatechol, 99% 934-00-9
Cyclobutanemethanol, 99% 4415-82-1
Tetraethylammonium Perchlorate, 98% (Titr., Dry Sub.), Conts.up to 2567-83-1
Poly-m-phenoxylene 25190-64-1
Hexachloroethane, 99% 67-72-1
6-Nitroindazole, 98% 7597-18-4
Butyl Isothiocyanate 592-82-5
2-Cyclopentene-1-acetic acid, 98% 13668-61-6
2-Methyl-2-hexanol, 97% 625-23-0
Tetrahydrofurfuryl Bromide, Tech, 90% 1192-30-9
Sulfoacetic Acid Monohydrate (Pract), 93% (Titr.) 6155-83-5
Dihydroxytartaric Acid, Disodium Salt Dihydrate, 98% 866-17-1
1-(p-Tolyl)-1-cyclopentanecarboxylic acid, 98% 80789-75-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net