Search   
MSDS 
:
 N,N-Dimethylformamide di-n-butyl acetal
CAS 
:
 18503-90-7
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 18503-90-7 |N,N-Dimethylformamide di-n-butyl aceta| 100 % | 242-387-0 |
| |l | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F
Risk Phrases: 10

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable.Moisture sensitive.The toxicological properties of this
material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Flammable
liquid and vapor.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Scoop up
with a nonsparking tool, then place into a suitable container for
disposal.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Wash hands before eating. Remove
contaminated clothing and wash before reuse. Use only in a
well-ventilated area. Avoid contact with skin and eyes. Avoid
ingestion and inhalation.
Storage:
Keep away from sources of ignition. Store in a cool, dry place. Keep
container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate general or local explosion-proof ventilation to keep
airborne levels to acceptable levels.
Exposure Limits
CAS# 18503-90-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 93 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 123 deg F ( 50.56 deg C)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Hydrolyzed in water.
Specific Gravity/Density: 0.85
Molecular Formula: C11H25NO2
Molecular Weight: 203.1805

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
High temperatures, mechanical shock, incompatible materials, ignition
sources, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidants. Hydrolyzed in water.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 18503-90-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
N,N-Dimethylformamide di-n-butyl acetal -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Products which are considered hazardous for supply are classified as Special
Waste and the disposal of such chemicals is covered by regulations which may
vary according to location. Contact a specialist disposal company or the local
waste regulator for advice. Empty containers must be decontaminated before
returning for recycling.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 10 Flammable.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
WGK (Water Danger/Protection)
CAS# 18503-90-7: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 18503-90-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 18503-90-7 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 12/12/1997 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Ethyl alpha-chlorophenylacetate, 99%
1,2-Dihydroxybenzene-3,5-disulfonic acid disodium salt 149-45-1
1,2-Dihydroxyethylene-Bisacrylamide 868-63-3
Di-(2-hydroxyphenylimino)-ethane 1149-16-2
3,4-Dihydro-2H-Pyran 110-87-2
Dimedone 126-81-8
2,3-Dimercapto propan-1-ol 59-52-9
9,10-Dimethoxyanthracene sulfonic acid sodium salt 67580-39-6
Diethylenetriaminepenta-acetic acid, sodium salt solution 67-43-6
2,7-Dihydroxynaphthalene, 97% 582-17-2
Dimethyl Acetylenedicarboxylate 762-42-5
Dimethylamine Solution (40 % in Water) 124-40-3
Dimethylamine borane 74-94-2
n-Methyloctadecylamine, 96% (titr.) 2439-55-6
4-Dimethylamino-Benzylidenerhodanine 536-17-4
4-Bromophenyl Isocyanate (Pract) 2493-02-9
3-Dimethylaminopropionitrile 1738-25-6
Dimethylammonium Chloride 506-59-2
Dimethyldichlorosilane 75-78-5
2,9-Dimethyl-4,7-diphenyl-1,10-phenanthroline disulfonic acid, 52698-84-7
N,N-Dimethylformamide di-n-butyl acetal 18503-90-7
N,N-Dimethylformamide dimethyl acetal 4637-24-5
15-Crown-5, 98% 33100-27-5
1,3-Dimethyl-2-imidazolidinone 80-73-9
2,9-Dimethyl-1,10-phenanthroline 484-11-7
NN-Dimethyl-p-phenylenediamine sulfate 536-47-0
1,4-Di(2-methylstyryl)benzene 13280-61-0
3,5-Dinitrobenzoic acid 99-34-3
2,4-Dinitro-1-Fluorobenzene 70-34-8
Ni-(S)-BPB-GLy, 99% 96293-19-5
2,4-Dinitrophenol, damped with 15-20% water 51-28-5
2,4-Dinitrophenylhydrazine damped with 33% water 119-26-6
Di-iso-octyl phthalate 27554-26-3
Dimidium bromide-disulfine blue indicator 97-77-8
NA-(2,4-Dinitro-5-fluorophenyl)-L-alaninamide 95713-52-3
Dimethylglyoxime Sodium Salt, octahydrate 75006-64-3
Chloropentafluorobenzene, 99% 344-07-0
Diphenyl ether 101-84-8
4,7-Diphenyl-1,10-Phenanthroline 1662-01-7
Di-iso-propyl naphthalene 38640-62-9
5,5'-Dithiobis(2-Nitrobenzoic Acid) 69-78-3
Dithio-oxamide 79-40-3
1-Dodecane sulfonic acid sodium salt 2386-53-0
Dodecan-1-ol 112-53-8
Dodecyl trimethyl ammonium bromide 1119-94-4
Dowfax 9N9 9016-45-9
Dulcitol 608-66-2
Eriochrome Blue-Black B 3564-14-5
Eriochrome Blue-Black R 2538-85-4
Eriochrome cyanine R 3564-18-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net