Search   
MSDS 
:
 Ethylbenzene-d10, 98+ atom % d
CAS 
:
 25837-05-2
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 25837-05-2 |Ethylbenzene-d10 | 98+atom% | 247-292-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN F
Risk Phrases: 10 36/37/38 20

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Irritating to eyes, respiratory system and skin. Harmful
by inhalation.Hygroscopic (absorbs moisture from the air).Possible
risks of irreversible effects.

Potential Health Effects
Eye:
Causes severe eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
Causes respiratory tract irritation. May be harmful if inhaled.
Vapors may cause dizziness or suffocation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Water may be
ineffective. Material is lighter than water and a fire may be spread
by the use of water. Containers may explode in the heat of a fire.
Flammable liquid and vapor. Vapors may be heavier than air. They
can spread along the ground and collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid contact with
eyes, skin, and clothing. Empty containers retain product residue,
(liquid and/or vapor), and can be dangerous. Keep container tightly
closed. Keep away from heat, sparks and flame. Avoid ingestion and
inhalation. Use with adequate ventilation. Wash clothing before
reuse. Do not pressurize, cut, weld, braze, solder, drill, grind, or
expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 25837-05-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: Colorless Liquid
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 134.5 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 15 deg C ( 59.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: practically insoluble in water
Specific Gravity/Density: .9490g/cm3
Molecular Formula: C8D10
Molecular Weight: 116.25

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, excess heat,
strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, moisture.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 25837-05-2 unlisted.
LD50/LC50:
Not available.
CAS#: 100-41-4 Oral, rat: LD50 = 3500 mg/kg.; Dermal, rabbit: LD50 =
17800 ul/kg.; Inhalation, human: TCLo = 100 ppm/8H.; The toxicity
of this product is partially based on the hazards associated with
ethylbenzene. Carcinogenicity:
Ethylbenzene-d10 -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ETHYLBENZENE
Hazard Class: 3
UN Number: 1175
Packing Group: II
IMO
Shipping Name: ETHYLBENZENE
Hazard Class: 3.2
UN Number: 1175
Packing Group: II
RID/ADR
Shipping Name: ETHYLBENZENE
Hazard Class: 3
UN Number: 1175
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN F
Risk Phrases:
R 10 Flammable.
R 20 Harmful by inhalation.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 24/25 Avoid contact with skin and eyes.
S 29 Do not empty into drains.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 25837-05-2: No information available.
Canada
CAS# 25837-05-2 is listed on Canada's NDSL List.
CAS# 25837-05-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 25837-05-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/10/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
L-Carnosine, 98% 305-84-0
Ethylbenzene-d10, 98+ atom % d 25837-05-2
Molybdenyl acetylacetonate, 99% 17524-05-9
3,7-Dimethyl-7-Hydroxyoctanal, 98% 107-75-5
D-L-5-Fluorotryptophan, 99+% 154-08-5
6-Chloronicotinic Acid, 99% 5326-23-8
Methyl 3,3-Dimethoxypropionate, 99% 7424-54-6
1-Acetamidoadamantane, 99+% 880-52-4
2-Nitroimidazole, 98% 527-73-1
Tetraphenylmethane, 97% 630-76-2
8-Nitroquinoline, 98% 607-35-2
3-Octylthiophene, 94%, remainder mainly tetradecane 65016-62-8
4-Nitrobenzophenone, 99+% 1144-74-7
9-Chloroacridine 1207-69-8
4-Epichlortetracycline hydrochloride 'can be used as secondary 101342-45-4
Sarcosine Hydrochloride, 99% 637-96-7
5-alpha-Cholestan-3-one, 97% 15600-08-5
n-Glycyl-l-isoleucine, 99% 19462-38-2
2,4-Dinitrophenylacetic Acid, Tech., 90%(GC) 643-43-6
2-Chloroethanesulfonyl Chloride, 95% (gc) 1622-32-8
Heptyl Isothiocyanate 4426-83-9
Alpha-Bromo-Meta-Tolunitrile, 95% 28188-41-2
Phenylpropiolic acid, 97% 637-44-5
2,3,5-Trimethylphenol, 98+% 697-82-5
2,4-Dinitrophenyl Acetate 4232-27-3
(1r,2r)-(+)-n,n'-dimethyl-1,2-diphenyl-1,2 -ethane diamine, 99% 118628-68-5
Isobutyric anhydride, 97% 97-72-3
Diethyl Ketomalonate, 95% (GC) 609-09-6
3-Aminopyrazine-2-Carboxylic Acid, 99+% 5424-01-1
2,3' -diethyl-9-methylthiacarbocyanine iodide 3065-79-0
6-Chloro-2-Pyridinol, 98% 16879-02-0
9-Aminofluorene hydrochloride, 99% 5978-75-6
1-Methoxy-3-(Trimethylsilyloxy)-1,3-Butadiene, 90% 59414-23-2
Aminoacetonitrile Hydrochloride, 99% 6011-14-9
Diphenylphosphinyl Chloride, 98% 1499-21-4
2-(2-Tritylaminothiazole-4-Yl)-2-Methoxyiminoacetic Acid 64485-90-1
Antimony (III) Sulfide, 98% 1345-04-6
Magnesiumhydrogenphosphate trihydrate, c.p 7782-75-4
1-Hydroxyethylethoxypiperazine, 95% 13349-82-1
4'-Chloroacetoacetanilide, 98% 101-92-8
Cycloheximide 66-81-9
??2,4??-Dibenzo-18-Crown-6, 99+% 14187-32-7
Cyanuric Chloride, 99% (Titr.) 108-77-0
Alpha-Toluenesulfonamide 4563-33-1
Ethyl 2-Mercaptoacetate, 99% (GC) 623-51-8
N-Carbethoxy-4-Tropinone, 98% 32499-64-2
2,3-Dimethylquinoxaline, 97% 2379-55-7
Potassium perchlorate 7778-74-7
Benzylamine 100-46-9
N-Omega-Acetylhistamine, 98% 673-49-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net