Search   
MSDS 
:
 Resorcinol sulfoxide, tech.
CAS 
:
 26948-96-9
SYNONYMS 
:
 4,4'-Sulfinyldiresorcinol
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 26948-96-9 |Resorcinol sulfoxide, tech. | ca. 100 | 248-129-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.

Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes irritation of the mucous membrane and upper respiratory
tract.
Chronic:
Effects may be delayed. Prolonged exposure can cause damage to the
eyes, severe irritation or burns.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Wash area with soap and water. Clean up spills immediately,
observing precautions in the Protective Equipment section. Sweep up,
then place into a suitable container for disposal. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Do not get in eyes, on skin, or on clothing. Keep
container tightly closed. Do not ingest or inhale. Use with adequate
ventilation. Do not breathe dust or fumes.
Storage:
Store in a tightly closed container. Store in a cool, dry area away
from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 26948-96-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: light brown
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 151 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: > 151 deg C
Solubility in water: Not available.
Specific Gravity/Density: Not available.
Molecular Formula: C12H10O5S
Molecular Weight: 266.26

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 26948-96-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Resorcinol sulfoxide, tech. -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 26948-96-9: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 26948-96-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 26948-96-9 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/29/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
l-Methionine Methylsulfonium Bromide, 99+% e.e.
Dl-methionine methylsulfonium bromide 99% (titr.)
Ethyl Glycidyl Ether 4016-11-9
ETHANETHIOL, 97% 75-08-1
Ethanethiol (techn) (15% in 2,2-dichloro- 1,1,1-trifluoroethane) 0-00-0
Potassium Chlorate, 99% 3811-04-9
1,3-Dioxolane, P.A. Stabilized With BHT 646-06-0
1,3-Dioxolane, P.A. Stabilized With 70ppm Triethylamine 646-06-0
L-Alpha-Hydroxyisocaproic Acid, 99% 13748-90-8
(1,2-Dibromoethyl)benzene, 97% 93-52-7
Potassium Chlorate, Reagent ACS Crystals 3811-04-9
1,2-Bis(tert-butylthio)ethane : diborane complex
O-Benzotriazol-1-yl-Tetramethyluronium Hexafluorophosphate, 99% 94790-37-1
Yttrium(III)-Chloride Hexahydrate, 99.999% 10361-92-9
Germanium, Powder, 99.999% 7440-56-4
Dichloro Bis(Triphenylphosphine)Palladium (II) 13965-03-2
1-Iodooctane, 98%, stabilized over copper 629-27-6
Citric Acid, Monohydrate, P.A. 5949-29-1
Dibenzofuran, 98% 132-64-9
4-Methoxy-3-nitrobenzoic acid, 98% 89-41-8
Calix[4]-bis-2,3-naptho-crown-6
trans-2-Hexen-1-ol, 96+% 928-95-0
Acetyl Methyl Carbinol, 85 Wt% Solution in Water 513-86-0
cis-6-Nonenal, 90% 2277-19-2
p-Ethylcalix[7]arene 0-00-0
p-tert. Butylcalix(5)arene-crown-5-complex
P-tert.-butyl-calix[5]arene 81475-22-1
Selenourea, 99.9+% 630-10-4
Resorcinol sulfoxide, tech. 26948-96-9
N-BOC-3-(4-Cyanophenyl)oxaziridine 150884-56-3
1,3,5-tris(1,2,3-thiadiazol-4-yl)benzene 95+% (nmr)
2-(Trimethylsilyl)thiazole, 96% 79265-30-8
3-(Trifluoromethoxy)benzoic acid, 99+% (titr.) 1014-81-9
2-(Trifluoromethoxy)aniline 1535-75-7
2-Pyrone-3-Carboxylic Acid-(2,2-Dimethyl-4 0-00-0
Nigrosine (pract) 80316-29-6
Nigrosin (cert) 80316-29-6
Samarium(II) iodide 0.1M solution in THF stabilized with samarium 109-99-9
Potassium hexachloroosmate(IV), min 39% Os 16871-60-6
2,4,6-Collidine, 99% 108-75-8
Ethyl 2-thiophenecarboxylate, 99+% 2810-04-0
2,4,6-Collidine, electron microscopy grade, 99% 108-75-8
Ethylenediaminetetraacetic Acid Dipotassium Salt, Dihydrate, 93% 2001-94-7
Ethylenediaminetetraacetic Acid, Dipotassium Salt Dihydrate, 99% 2001-94-7
Fluorescein disodium salt dihydrate, 90% 518-47-8
Potassium methoxide, 0.1n solution in tolu ene/methanol 865-33-8
1-Chloroanthraquinone, 98% 82-44-0
Citric Acid, Anhydrous, P.A. 77-92-9
Acetone, 99+%, Spectrophotometric Grade 67-64-1
Citric Acid, Anhydrous, Reagent ACS, 99.5% (Titr.) 77-92-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net