Search   
MSDS 
:
 5-Methoxy-2-methylbenzselenazole, 97%
CAS 
:
 2946-17-0
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2946-17-0 |5-Methoxy-2-methylbenzselenazole | 97 | 220-956-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T N
Risk Phrases: 23/25 33 50/53

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic by inhalation and if swallowed. Danger of cumulative effects.
Very toxic to aquatic organisms, may cause long-term adverse effects
in the aquatic environment.The toxicological properties of this
material have not been fully investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be absorbed through the skin in
harmful amounts.
Ingestion:
Poison by ingestion. The toxicological properties of this substance
have not been fully investigated.
Inhalation:
The toxicological properties of this substance have not been fully
investigated. Toxic if inhaled.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Get medical aid immediately. Wash mouth out with water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 2946-17-0:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: orange - red
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 115 - 117 deg C @ 1
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.4910g/cm3
Molecular Formula:
Molecular Weight: 226.14

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, selenium/selenium
oxides.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2946-17-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
5-Methoxy-2-methylbenzselenazole -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: SELENIUM COMPOUND, N.O.S.
Hazard Class: 6.1
UN Number: 3283
Packing Group: III
IMO
Shipping Name: SELENIUM COMPOUND, N.O.S.
Hazard Class: 6.1
UN Number: 3283
Packing Group: III
RID/ADR
Shipping Name: SELENIUM COMPOUND, N.O.S.
Hazard Class: 6.1
UN Number: 3283
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T N
Risk Phrases:
R 23/25 Toxic by inhalation and if swallowed.
R 33 Danger of cumulative effects.
R 50/53 Very toxic to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.
Safety Phrases:
S 20/21 When using do not eat, drink or smoke.
S 28A After contact with skin, wash immediately with
plenty of water.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 60 This material and its container must be
disposed of as hazardous waste.
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
WGK (Water Danger/Protection)
CAS# 2946-17-0: No information available.
Canada
CAS# 2946-17-0 is listed on Canada's NDSL List.
CAS# 2946-17-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2946-17-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/04/2000 Revision #1 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
TETRAPROPYLAMMONIUM HYDROXIDE (25% IN WATER) 4499-86-9
Decacyclene, 95% 191-48-0
5-Methoxy-2-methylbenzselenazole, 97% 2946-17-0
2-Fluorobenzaldehyde 446-52-6
2-Aminonaphtho[1,2]Thiazole, 98% (Titr.) 40172-65-4
n-Hexyllithium, 33 wt% in n-hexane 110-54-3
Quinazoline, 98% 253-82-7
N-tert-Butoxycarbonyl-1,6-hexanediamine, 95% 51857-17-1
Imidazole, Crystalline, 99+% 288-32-4
Phenyltin Trichloride, 98% 1124-19-2
Potassium tris(1-pyrazolyl)borohydride 18583-60-3
1,3,5-Benzenetrisulfonyl chloride 21538-06-7
Potassium tris(3,5-dimethyl-1-pyrazolyl)borohydride, 99% 17567-17-8
BIS(2,4,6-TRIMETHYLPYRIDINE)IODINE (I) HEXAFLUOROPHOSPHATE
1-Hydroxy-1-Cyclopropanecarboxyllic Acid 17994-25-1
AGMATINE SULFATE, 85+% 2482-00-0
2,6-Di-Tert.-Butyl-4-Methylphenyldiazo Acetate 125640-92-8
3-Methylpiperidine, 99% 626-56-2
Aluminum atomic absorption standard solution, 1 mg/ml Al in 0.5N HNO3 7429-90-5
Diethyl diethylmalonate, 98% (gc) 77-25-8
Nicotine, pract., 95% 54-11-5
Deoxyribonucleic acid (d.n.a.)
3-(Trifluoromethoxy)Benzonitrile, 97% 52771-22-9
Sodium Pivalate, 99% (titr., on the dry basis) 1184-88-9
2-Amino-4,5-dimethylthiazole hydrobromide, 99% 7170-76-5
Arion pigment
Aziridino[2',3':1,2][60]fullerene
Azur Eosin Methylene-Blue Solution According to Giemsa 0-00-1
n-Benzyl-4-(2-hydroxyethyl)piperidine, 97+%
3,5-bis(chloromethyl)-2,4,6-trimethyl-phenol, 96% (gc) 33919-18-5
1,4-Bis(Diphenylphosphino)Butane 7688-25-7
Bis(phenylsulfonyl)sulfide, 96% (TLC)
Iminodiacetic Acid, 98% 142-73-4
3-Bromophenylacetic acid 1878-67-7
p-Tert-Butylcalix (7) Arene
p-Tert-Butyldihomooxacalix (4) Arene
Carbopol 940 9003-01-4
2-(2-Chloroethoxy)ethanol 628-89-7
3-(4-Chlorophenyl)pyrazole 59843-58-2
3-Amino-1-phenyl-1-propanol hydrochloride
1,5-Cyclooctadiene 111-78-4
trans-5-Decen-1-ol, 95% 56578-18-8
1,1-Diethoxycyclohexane 1670-47-9
3,4-Difluorobenzyl alcohol, 99% 85118-05-4
2,5-Dihydroxy-2,5-dimethyl-1,4-dithiane, 95% 55704-78-4
Ethyl 3-benzoylacrylate, tech. 93%, containg ca 3% cis-isomer 17450-56-5
Methyl 4-chloroacetoacetate,97% 32807-28-6
P-Isopropylcalix[4]arene
P-Isopropylcalix[6]arene
5-Amino-1-Pentanol 2508-29-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net