Search   
MSDS 
:
 2-Chlorophenyl isocyanate
CAS 
:
 3320-83-0
SYNONYMS 
:
 o-Chlorophenyl isocyanate; o-Chlorophenylcarbonimide; Isocyanic acid,     o-chlorophenyl ester.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 3320-83-0 |2-Chlorophenyl isocyanate | 99 | 222-023-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 23/24/25 36/37/38 42

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic by inhalation, in contact with skin and if swallowed.
Irritating to eyes, respiratory system and skin. May cause
sensitization by inhalation.Water-reactive.

Potential Health Effects
Eye:
Causes eye irritation. Lachrymator (substance which increases the
flow of tears). May cause severe eye irritation and possible
injury.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
Organic isocyanates can cause local irritation and allergic
reactions. Isocyanates, in general, can cause skin discoloration
(staining) and hardening of the skin after repeated exposures.
Ingestion:
Harmful if swallowed. May cause gastrointestinal irritation with
nausea, vomiting and diarrhea.
Inhalation:
Causes respiratory tract irritation. May cause allergic respiratory
reaction. May cause irritation of the respiratory tract with burning
pain in the nose and throat, coughing, wheezing, shortness of breath
and pulmonary edema. Impaired lung functions (decreased ventilatory
capacity) has been associated with overexposure to isocyanate.
Chronic:
Chronic overexposure to isocyanates has been reported to cause lung
damage, including decreased lung fuction, which may be permanent.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with soap and plenty of
water. Remove contaminated clothing and shoes. Get medical aid if
symptoms occur. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
POISON material. If inhaled, get medical aid immediately. Remove
victim to fresh air. If not breathing, give artificial respiration.
If breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Use water spray to keep fire-exposed containers
cool. Fire or excessive heat may result in violent rupture of the
container due to bulk polymerization. Combustible liquid and vapor.
Approach fire from upwind to avoid hazardous vapors and toxic
decomposition products. Evacuate unnecessary personnel. Vapors are
heavier than air and may travel to a source of ignition and flash
back. Vapors can spread along the ground and collect in low or
confined areas.
Extinguishing Media:
In case of fire, use carbon dioxide or dry chemical.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. Do
not expose spill to water. Do not get water inside containers.
Evacuate unnecessary personnel. Approach spill from upwind.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Empty
containers retain product residue, (liquid and/or vapor), and can be
dangerous. Keep container tightly closed. Do not allow contact with
water. Do not pressurize, cut, weld, braze, solder, drill, grind, or
expose empty containers to heat, sparks or open flames. Keep away
from heat, sparks and flame. Do not breathe spray or mist. Inform
laundry personnel of contaminant's hazards. Isocyanates react with
water to form CO2 gas. This gas can cause sealed containers to
expand and possibly rupture. Use only with adequate ventilation or
respiratory protection. Never work alone with this chemical.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Keep container closed when not in use. Store in a tightly
closed container. Store in a cool, dry, well-ventilated area away
from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local explosion-proof ventilation to keep airborne levels to
acceptable levels.
Exposure Limits
CAS# 3320-83-0:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use. Follow the OSHA
respirator regulations found in 29 CFR 1910.134 or
European Standard EN 149. Use a NIOSH/MSHA or
European Standard EN 149 approved respirator if
exposure limits are exceeded or if irritation or
other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: irritating odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 83-84 @ 10 mm Hg
Freezing/Melting Point: 2-4 deg C
Autoignition Temperature: Not available.
Flash Point: 88 deg C ( 190.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Hydrolysis.
Specific Gravity/Density: 1.273 g/cm3
Molecular Formula: C7H4ClNO
Molecular Weight: 153.57

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions. May polymerize.
Conditions to Avoid:
Ignition sources, moisture, excess heat, confined spaces.
Incompatibilities with Other Materials:
Water, strong oxidizing agents, acids, strong bases, alcohols,
amines, organotin catalysts.
Hazardous Decomposition Products:
Hydrogen chloride, hydrogen cyanide, carbon monoxide, oxides of
nitrogen, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: May occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 3320-83-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Chlorophenyl isocyanate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ISOCYANATES, TOXIC, N.O.S.*
Hazard Class: 6.1
UN Number: 2206
Packing Group: II
IMO
Shipping Name: ISOCYANATES, TOXIC, N.O.S.
Hazard Class: 6.1
UN Number: 2206
Packing Group: II
RID/ADR
Shipping Name: ISOCYANATES, TOXIC, N.O.S.
Hazard Class: 6.1
UN Number: 2206
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 23/24/25 Toxic by inhalation, in contact with skin
and if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
R 42 May cause sensitization by inhalation.
Safety Phrases:
S 23 Do not inhale gas/fumes/vapour/spray.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 38 In case of insufficient ventilation, wear
suitable respiratory equipment.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 3320-83-0: 1
Canada
CAS# 3320-83-0 is listed on Canada's NDSL List.
CAS# 3320-83-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 3320-83-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/05/1997 Revision #8 Date: 12/12/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
9-Hydrazinoacridine 3407-93-0
2,2,2-Trifluoroethylamine Hydrochloride 99% 373-88-6
1-Methyl-3,4-Dihydroisoquinoline Hydrochloride, 99+% 26210-39-9
Tri-o-acetyl-d-glucal, 99% 2873-29-2
2-Chlorophenyl isocyanate 3320-83-0
3,5-Dimethoxyphenol, 97% (GC) 500-99-2
N,N-Dimethylacetamide-d9, 99+ atom% d 16727-10-9
Resorcinol monoacetate, tech. 102-29-4
1-Bromo-3,5-Dimethylbenzene, 98% 556-96-7
(S)-(+)-2-Methylbutyl p-[(p-methoxybenzylidene)amino]cinnamate, 98% 24140-30-5
Pseudopelletierine Hydrochloride, 98% 6164-62-1
P-Nitrophenol Sodium Salt, Dihydrate, 75% (UV-VIS) 824-78-2
Silver p-toluenesulfonate, 99+% 16836-95-6
22621-O-Dibutyryladenosine 3',5'-cyclic monophosphate sodium salt 16980-89-5
2',5'-Dimethylacetophenone, 99% (gc) 2142-73-6
Tri-n-butyltin chloride, tech., 90% 1461-22-9
1-Methylpiperazine, 99+% (gc) 109-01-3
3,5-Diiodo-4-hydroxybenzonitrile, 98% 1689-83-4
3,5-Dichlorosalicylic acid 320-72-9
Trans-2,4-Dichlorocinnamic Acid, 98% 1201-99-6
Beeswax, Bleached, White 8006-40-4
Ethyl bromopyruvate, 80-85% 70-23-5
3-Dimethylamino-2-Methylpropyl Chloride Hydrochloride, 98% 4261-67-0
2-Picoline-N-oxide, 98% 931-19-1
Bis(4-Bromophenyl) Ether 2050-47-7
Methyl 4-Bromobenzoate, 99% (GC) 619-42-1
Ethyl 2-Cyclohexanonecarboxylate, 98% (GC) 1655-07-8
4,4'-Dibromobiphenyl, 99% 92-86-4
Aluminum Bromide, Anhydrous, 98+% 7727-15-3
3,3'-Diaminobenzidine, 99% 91-95-2
2-Methoxyphenylacetone, 98% 5211-62-1
Beta-d-Ribofuranose 1,2,3,5-Tetraacetate 13035-61-5
N,N'-(2,3-Dinitro-1,4-phenylene) bisacetamide, 97%
(+)-2-Methylbutyl-p-aminocinnamate, 98% (titr.) 62742-50-1
Trimethylsulfonium Iodide, 98% 2181-42-2
2,2-Dichlorotetradecanal, 90% 119450-45-2
2-Nitropropane, 96% 79-46-9
1-Acetylimidazole, 98% 2466-76-4
7-Ethoxycoumarin, 99.5% 31005-02-4
5-Bromo-2-iodotoluene, 98%
3-Ethoxy-1-(4-Nitrophenyl)-2-Pyrazolin- 5-One, 98% (UV-Vis) 4105-90-2
S-(4-Nitrobenzyl)-6-Thioguanosine, 99% 13153-27-0
2,3,4-Tri-O-Acetyl-Beta-D-Xylopyranosyl Azide, 98% 53784-33-1
4-Bromo-2-Chlorophenol, 99% 3964-56-5
2,2,5,5-Tetramethyl-4-phenyl-3-imidazoline -3-oxide-1-oxyl, free 18796-03-7
Nitroethane, 98+% 79-24-3
3-Hydroxypyridine-N-oxide, 99% 6602-28-4
1,2-O-Cyclohexylidene-Alpha-D-Glucofuranose, 98% 16832-21-6
1-Methylheptylamine, 96% (gc) 693-16-3
1-(5-Chloro-2-Methylphenyl)Piperazine 76835-20-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net