Search   
MSDS 
:
 3,5-Dimethylpiperidine, 96%
CAS 
:
 35794-11-7
SYNONYMS 
:
 3,5-Lupetidine
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 35794-11-7 |3,5-Dimethylpiperidine | 96% | 252-730-6 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 10 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Irritating to eyes, respiratory system and skin.The
toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated. Vapors may cause
dizziness or suffocation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT use straight streams of
water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. A
vapor suppressing foam may be used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Ground and bond containers when transferring material. Use
spark-proof tools and explosion proof equipment. Avoid breathing
dust, vapor, mist, or gas. Avoid contact with eyes, skin, and
clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Keep
away from heat, sparks and flame. Avoid ingestion and inhalation.
Use with adequate ventilation. Use only in a chemical fume hood.
Wash clothing before reuse. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 35794-11-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 144 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 32 deg C ( 89.60 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: .8530g/cm3
Molecular Formula: C7H15N
Molecular Weight: 113.20

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, oxidizers.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 35794-11-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3,5-Dimethylpiperidine -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: III
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.3
UN Number: 1993
Packing Group: III
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 10 Flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 33 Take precautionary measures against static
discharges.
S 37/39 Wear suitable gloves and eye/face
protection.
S 50A Do not mix with acids.
WGK (Water Danger/Protection)
CAS# 35794-11-7: No information available.
Canada
CAS# 35794-11-7 is listed on Canada's NDSL List.
CAS# 35794-11-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 35794-11-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 10/20/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Chlorophenethylacohol, 98% 5182-44-5
4-Chlorophenethylalcohol, 99% 1875-88-3
2,4-Dichlorophenethylalcohol 81156-68-5
3,5-Dimethyl-4-Hydroxybenzonitrile 4198-90-7
1,2-Dinitrobenzene, 99% 528-29-0
2,6-Dimethylnaphthalene 581-42-0
Ethyl Phenyl Sulfone, 98% 599-70-2
Isobutyl Benzoate, 98% 120-50-3
Diethyl benzylmalonate, 97% 607-81-8
Pentaethylene glycol, 98% 4792-15-8
4',4"(5")-Di-tert. butyldicyclohexano-18-crown-6, mixture of isomers 28801-57-2
4-Bromo-2,6-dimethylaniline, 98% 24596-19-8
1,1,1-Trichloro-2-methyl-2-propanol hemihydrate, 98% 6001-64-5
L-Lysine 56-87-1
Grubb's catalyst, 97% 172222-30-9
4-Methoxybiphenyl, 98% 613-37-6
2-Naphthalenemethanol, 98% 1592-38-7
2-Amino-4,6-dimethylpyridine, 99% 5407-87-4
1-Naphthyl Propionate 3121-71-9
N,N'-Diacetylhydrazine, 98% 3148-73-0
2,4,6-Trimethylphenylacetic Acid 4408-60-0
2,4,6-Trimethylbenzylcyanide 34688-71-6
Triethylgermanium hydride, 98% 1188-14-3
Trimethylgermanium Bromide, 98% 1066-37-1
Triphenylgermanium Chloride 1626-24-0
Diphenylgermanium Dichloride, 95% 1613-66-7
Chlorotriethylgermane, 96% 994-28-5
Triphenylgermanium bromide, 95% 3005-32-1
Germanium(IV) methoxide, 97% 992-91-6
Trimethylgermanium iodide 1066-38-2
(2-Methoxyphenyl)acetonitrile, 98% 7035-03-2
Tris(cyclopentadienyl)praseodymium 11077-59-1
Trimethoxy(pentamethylcyclopentadienyl) titanium(IV) 123927-75-3
Diphenylzinc, 95% 1078-58-6
Trimethyl(pentafluorophenyl)silane, 98% 1206-46-8
Pentamethylcyclopentadienyl Hafnium Trichloride 75181-08-7
Tantalum(V) Butoxide 51094-78-1
Bis(pentamethylcylcopentadienyl)hafnium dichloride 85959-83-7
Benzyltrichlorosilane 770-10-5
Tetrakis(dimethylamino)titanium 3275-24-9
Bis(pentamethylcyclopentadienyl)manganese 67506-86-9
alpha-Methylferrocenemethanol, 97% 1277-49-2
Tris(pentafluorophenyl)borane, 95% 1109-15-5
3,5-Dimethylpiperidine, 96% 35794-11-7
Tin(II) acetate 638-39-1
Diphenyltin oxide, 97% 2273-51-0
Tricarbonyl(cycloheptatriene)molybdenum 12125-77-8
Tetraphenylantimony bromide 16894-69-2
4,4,6-Trimethyl-2-vinyl-1,3,2- dioxaborinane 4627-10-5
Hexylphosphonic Dichloride, 95% 928-64-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net