Search   
MSDS 
:
 Methyl Vanillate, 99%
CAS 
:
 3943-74-6
SYNONYMS 
:
 Methyl 4-Hydroxy-3-Methoxybenzoate; Vanillic Acid, Methyl Ester.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 3943-74-6 |Methyl Vanillate | 99% | 223-525-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Runoff from
fire control or dilution water may cause pollution.
Extinguishing Media:
Use agent most appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels.
Exposure Limits
CAS# 3943-74-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: slightly yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 285 - 287 deg C @ 760mmHg
Freezing/Melting Point: 64.00 - 65.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C9H10O4
Molecular Weight: 182.18

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong
oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 3943-74-6: DH2430000
LD50/LC50:
Not available.
Carcinogenicity:
Methyl Vanillate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 3943-74-6: No information available.
Canada
CAS# 3943-74-6 is listed on Canada's DSL List.
CAS# 3943-74-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 3943-74-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Aluminum Nitrate Nonahydrate, P.A. 7784-27-2
Acetamide 60-35-5
2-Methoxyethylisothiocyanate 38663-85-3
9-Methyladenine, 98% 700-00-5
Tetrahydropyran, 99% 142-68-7
Methyl Vanillate, 99% 3943-74-6
Acetanilide 103-84-4
3,4-Diaminothiophene dihydrochloride, 99% 0-01-1
Dodecylbenzenesulfonic acid, sodium salt, tech. 25155-30-0
(3S-cis)-(+)-3,7a-Diphenyltetrahydropyrrolo-[2,1-b]oxazol-5(6H)-one 161970-71-4
Hydroxylamine-O-Sulfonic Acid, 97% 2950-43-8
Acetic acid, >96% 64-19-7
6-Chloro-2-Methyl-4-Nitroaniline, 97% 69951-02-6
Nonidet?? P-40, 99% 9016-45-9
DL-2'-Methylphenylalanine Hydrochloride 22888-51-3
DL-5-Methyl-1,2,3,4-Tetrahydroisoquinoline-3-Carboxylic Acid 151637-59-1
1-Chloro-2-Methyl-2-Propanol, 98% 558-42-9
DL-N-FMOC-2'-Methylphenylalanine 135944-06-8
DL-Alpha-Aminosuberic Acid 3054-07-7
Acetic anhydride 108-24-7
Pentacyanoamine ferroate, ammonium disodium salt, pentahydrate 97% 80789-79-3
DL-1,2,3,4-Tetrahydroisoquinoline-1-Carboxylic Acid Hydrochloride 0-01-1
DL-BOC-5-Methyl-1,2,3,4-Tetrahydroisoquinoline-3-Carboxylic Acid, 98% 0-01-1
DL-BOC-2'-Methylphenylalanine, 98% 0-01-1
4-Acetamidobutyric acid, 99+ % 3025-96-5
1-Acetylthiosemicarbazide, 95% 2302-88-7
2,4-Dimethylsulfolane, 95% 1003-78-7
Acetone 67-64-1
3,4-Dichlorobenzyl Bromide, 97% 18880-04-1
3-Chlorobenzal Chloride, 96% 0-01-1
70 wt% Nickel on silica catalyst, reduced and stabilized, 30-40 M2 Ni 1313-99-1
2-Chloro-4,5-Difluorobenzoic Acid, 99+% 110877-64-0
3-Aminoquinuclidine dihydrochloride, 98% 6530-09-2
66 wt% Nickel on silica catalyst, reduced and stabilized, 20-30 M2 Ni 1313-99-1
66 wt% Nickel on silica catalyst, reduced and stabilized, 30-40 M2 Ni 1313-99-1
50 wt% Nickel on alumina catalyst, reduced and stabilized,15-25 M2 Ni 1313-99-1
3-Amino-N,N-Dimethyl-4-Nitroaniline, 97% 2069-71-8
4-Amino-N,N-Dimethyl-3-Nitroaniline, 97% 16293-12-2
4-Bromo-3-Nitroaniline, 97% 53324-38-2
4-Butoxy-3-Nitroaniline, 97% 0-01-1
Aluminum Oxide, Activated, Acidic, for Column Chromatography, 50-200 1344-28-1
4,4-Dimethyl-1-phenyl-3-pyrazolidone, 99% 2654-58-2
4-Iodo-3-Nitrophenol, 97% 50590-07-3
Aluminum, Powder, 200 Mesh, 99% 7429-90-5
3-Iodo-4-Nitrotoluene, 97% 52488-29-6
3-Pyridinecarboxaldehyde, 98% 500-22-1
Isodehydracetic acid, 99+% 480-65-9
2,2'-(3,6-Dithiaoctamethylene)dipyridine, 99% 64691-70-9
3-Iodo-4-Nitroanisole, 97% 0-01-1
Hecogenin acetate 915-35-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net