Search   
MSDS 
:
 2,2,3,3-Tetrafluoropropyl methacrylate, 99%
CAS 
:
 45102-52-1
SYNONYMS 
:
 2-Propenoic acid, 2-methyl-, 2,2,3,3-tetrafluoropropyl ester;     Methacrylic acid 2,2,3,3-tetrafluoropropyl ester.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 45102-52-1 |2,2,3,3-Tetrafluoropropyl methacrylate| 99 | 256-189-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 10 20/21/22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Harmful by inhalation, in contact with skin and if
swallowed.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated. May be
harmful if swallowed.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated. May be harmful if
inhaled.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Use water spray to keep fire-exposed containers
cool. Flammable liquid and vapor. Fire or excessive heat may result
in violent rupture of the container due to bulk polymerization.
Vapors are heavier than air and may travel to a source of ignition
and flash back. Vapors can spread along the ground and collect in
low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Water may be ineffective. Do NOT use
straight streams of water. Cool containers with flooding quantities
of water until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Use a spark-proof tool. Provide ventilation. A vapor suppressing
foam may be used to reduce vapors. Water spray may reduce vapor but
may not prevent ignition in closed spaces.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Ground and bond
containers when transferring material. Use spark-proof tools and
explosion proof equipment. Avoid contact with eyes, skin, and
clothing. Empty containers retain product residue, (liquid and/or
vapor), and can be dangerous. Keep container tightly closed. Keep
away from heat, sparks and flame. Avoid ingestion and inhalation. Do
not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames. Pure vapor will be
uninhibited and may polymerize in vents or other confined spaces.
Storage:
Keep away from sources of ignition. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use explosion-proof ventilation equipment. Facilities storing or
utilizing this material should be equipped with an eyewash facility
and a safety shower. Use only under a chemical fume hood.
Exposure Limits
CAS# 45102-52-1:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: ester-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 124 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 50 deg C ( 122.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Negligible.
Specific Gravity/Density: 1.2500g/cm3
Molecular Formula: C7H8F4O2
Molecular Weight: 200.14

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures. May polymerize.
Conditions to Avoid:
Ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, hydrogen fluoride gas.
Hazardous Polymerization: May occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 45102-52-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2,2,3,3-Tetrafluoropropyl methacrylate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: III
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.3
UN Number: 1993
Packing Group: III
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 10 Flammable.
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
S 36/37 Wear suitable protective clothing and
gloves.
WGK (Water Danger/Protection)
CAS# 45102-52-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 45102-52-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 45102-52-1 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 5/04/1999 Revision #3 Date: 3/16/2005

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Tin (II) Bromide 10031-24-0
Erbium(III) nitrate pentahydrate, 99.9% 10031-51-3
Aurintricarboxylic Acid 4431-00-9
Terbium(III) carbonate hydrate, 99.9% 100587-96-0
Cerium (IV) Fluoride, 99% 10060-10-3
Diammonium Tetrachlorocuprate(II) Dihydrate, 98% 10060-13-6
Lanthanum Chloride, 99.9% 10099-58-8
Dysprosium(III) Sulfate Octahydrate, 99.99+% 10031-50-2
Vincristine sulfate, 95% (hplc) 2068-78-2
Lead(II)Nitrate, 99.999% 10099-74-8
Strontium Nitrate, Reagent ACS, 99+% 10042-76-9
Boric Acid, 99.99% 10043-35-3
Chromium (II) Chloride, 99.9% 10049-05-5
Calcium sulfate dihydrate, reagent ACS 7778-18-9
Cadmium chloride, reagent ACS, 99+% 10108-64-2
Copper (II) Chloride Dihydrate, Reagent ACS, 99+% 10125-13-0
Bismuth(III) Nitrate Pentahydrate, 99.999% 10035-06-0
Barium Carbonate, 99.999% 513-77-9
Ethoxymethylenemalononitrile, 98% 123-06-8
Erbium(III) Chloride, 99.9% 10138-41-7
Holmium(III) chloride, 99.9% 10138-62-2
Diphenyl(p-tolyl)phosphine, 96% 1031-93-2
Samarium(III) chloride, -20 mesh, 97% 10361-82-7
Scandium trichloride, anhydrous, 99.99% 10361-84-9
Barium bromide, anhydrous, 99.999% 10553-31-8
Sodium acetylide, 18 wt% slurry in xylene/light mineral oil, 95% 1066-26-8
(2-Naphthoxy)-acetic acid, 98% 120-23-0
Europium(III) Acetate Hydrate, 99.9% 62667-64-5
Niobium (IV) Oxide, -200 Mesh, 99+% 12034-59-2
Rhenium(IV)oxide dihydrate, 99.9% 12036-09-8
Titanium boride, powder, ca. 10 micron 12045-63-5
Scandium (III) Oxide, 99.9% 12060-08-1
Lutetium oxide, 99.9% 12032-20-1
2-Bromo-5-Fluorophenol, 99% 147460-41-1
Terbium(III,IV) oxide, 99.9% 12037-01-3
3-(1,1,2,2-Tetrafluoroethoxy)aniline, 97% 831-75-4
3-(1,1,2,2-Tetrafluoroethoxy)benzaldehyde, 95% 35295-35-3
Tetrafluoroisophthalic acid, 98% 1551-39-9
Tetrafluoroisophthalonitrile, 98% 2377-81-3
2,3,4,5-Tetrafluoronitrobenzene, 99% 5580-79-0
2,6,10-Trimethyl-5,9-undecadien-1-ol, 98% mixture of isomers 24048-14-4
Tetrafluorophthalonitrile, 95% 1835-65-0
2,2,3,3-Tetrafluoropropyl methacrylate, 99% 45102-52-1
1-(4-Chlorophenyl)-2-Methylpiperazine 55117-80-1
Tetrafluoroterephthalic Acid, 97% 652-36-8
2,3,5,6-Tetrafluorotoluene, 98% 5230-78-4
Triethylsilyl trifluoromethanesulfonate, 99% 79271-56-0
2,3,6-Trifluorobenzoic acid, 99% 2358-29-4
2,4,6-Trifluorobenzoic Acid, 98% 28314-80-9
Trans-1,2-Dibenzoylethylene, 97% 959-28-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net