Search   
MSDS 
:
 Triethylsilyl trifluoromethanesulfonate, 99%
CAS 
:
 79271-56-0
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 79271-56-0 |Triethylsilyl trifluoromethanesulfonat| 99% | 279-124-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 14 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Reacts violently with water. Causes burns.Moisture sensitive.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns. The toxicological properties of
this substance have not been fully investigated.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. Causes chemical burns to the respiratory tract.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Will burn if involved in a fire. Water Reactive.
Material will react with water and may release a flammable and/or
toxic gas. Combustible liquid.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER!

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Do not allow contact with water. Use only in a
chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 79271-56-0:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 85 - 86 deg C @ 12.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 72 deg C ( 161.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.1690g/cm3
Molecular Formula: CF3SO3Si(C2H5)3
Molecular Weight: 264.34

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials, contact with water.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide, hydrogen fluoride
gas, silicon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 79271-56-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Triethylsilyl trifluoromethanesulfonate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, N.O.S.*
Hazard Class: 8
UN Number: 1760
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE LIQUID, N.O.S.
Hazard Class: 8
UN Number: 1760
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 14 Reacts violently with water.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 27 Take off immediately all contaminated clothing.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 79271-56-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 79271-56-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 79271-56-0 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/12/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Tin (II) Bromide 10031-24-0
Erbium(III) nitrate pentahydrate, 99.9% 10031-51-3
Aurintricarboxylic Acid 4431-00-9
Terbium(III) carbonate hydrate, 99.9% 100587-96-0
Cerium (IV) Fluoride, 99% 10060-10-3
Diammonium Tetrachlorocuprate(II) Dihydrate, 98% 10060-13-6
Lanthanum Chloride, 99.9% 10099-58-8
Dysprosium(III) Sulfate Octahydrate, 99.99+% 10031-50-2
Vincristine sulfate, 95% (hplc) 2068-78-2
Lead(II)Nitrate, 99.999% 10099-74-8
Strontium Nitrate, Reagent ACS, 99+% 10042-76-9
Boric Acid, 99.99% 10043-35-3
Chromium (II) Chloride, 99.9% 10049-05-5
Calcium sulfate dihydrate, reagent ACS 7778-18-9
Cadmium chloride, reagent ACS, 99+% 10108-64-2
Copper (II) Chloride Dihydrate, Reagent ACS, 99+% 10125-13-0
Bismuth(III) Nitrate Pentahydrate, 99.999% 10035-06-0
Barium Carbonate, 99.999% 513-77-9
Ethoxymethylenemalononitrile, 98% 123-06-8
Erbium(III) Chloride, 99.9% 10138-41-7
Holmium(III) chloride, 99.9% 10138-62-2
Diphenyl(p-tolyl)phosphine, 96% 1031-93-2
Samarium(III) chloride, -20 mesh, 97% 10361-82-7
Scandium trichloride, anhydrous, 99.99% 10361-84-9
Barium bromide, anhydrous, 99.999% 10553-31-8
Sodium acetylide, 18 wt% slurry in xylene/light mineral oil, 95% 1066-26-8
(2-Naphthoxy)-acetic acid, 98% 120-23-0
Europium(III) Acetate Hydrate, 99.9% 62667-64-5
Niobium (IV) Oxide, -200 Mesh, 99+% 12034-59-2
Rhenium(IV)oxide dihydrate, 99.9% 12036-09-8
Titanium boride, powder, ca. 10 micron 12045-63-5
Scandium (III) Oxide, 99.9% 12060-08-1
Lutetium oxide, 99.9% 12032-20-1
2-Bromo-5-Fluorophenol, 99% 147460-41-1
Terbium(III,IV) oxide, 99.9% 12037-01-3
3-(1,1,2,2-Tetrafluoroethoxy)aniline, 97% 831-75-4
3-(1,1,2,2-Tetrafluoroethoxy)benzaldehyde, 95% 35295-35-3
Tetrafluoroisophthalic acid, 98% 1551-39-9
Tetrafluoroisophthalonitrile, 98% 2377-81-3
2,3,4,5-Tetrafluoronitrobenzene, 99% 5580-79-0
2,6,10-Trimethyl-5,9-undecadien-1-ol, 98% mixture of isomers 24048-14-4
Tetrafluorophthalonitrile, 95% 1835-65-0
2,2,3,3-Tetrafluoropropyl methacrylate, 99% 45102-52-1
1-(4-Chlorophenyl)-2-Methylpiperazine 55117-80-1
Tetrafluoroterephthalic Acid, 97% 652-36-8
2,3,5,6-Tetrafluorotoluene, 98% 5230-78-4
Triethylsilyl trifluoromethanesulfonate, 99% 79271-56-0
2,3,6-Trifluorobenzoic acid, 99% 2358-29-4
2,4,6-Trifluorobenzoic Acid, 98% 28314-80-9
Trans-1,2-Dibenzoylethylene, 97% 959-28-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net