Search   
MSDS 
:
 4-Chlorobutyryl chloride, specialty project grade
CAS 
:
 4635-59-0
SYNONYMS 
:
 
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 4635-59-0 |4-Chlorobutyryl chloride | | 225-059-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 22 23 35

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Toxic by inhalation. Causes severe
burns.Moisture sensitive.

Potential Health Effects
Eye:
Causes severe eye burns. Lachrymator (substance which increases
the flow of tears).
Skin:
Causes skin burns.
Ingestion:
Harmful if swallowed. Causes gastrointestinal tract burns.
Inhalation:
May cause severe irritation of the respiratory tract with sore
throat, coughing, shortness of breath and delayed lung edema. Causes
chemical burns to the respiratory tract. Inhalation may be fatal as
a result of spasm, inflammation, edema of the larynx and bronchi,
chemical pneumonitis and pulmonary edema. Toxic if inhaled.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do NOT induce vomiting and seek IMMEDIATE MEDICAL ADVICE.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Combustible liquid.
Extinguishing Media:
Do NOT use water directly on fire. Use foam, dry chemical, or carbon
dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Use only in a chemical fume hood.
Storage:
Keep away from sources of ignition. Store in a cool, dry place. Do
not store in direct sunlight. Store in a tightly closed container.
Corrosives area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 4635-59-0:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: light yellow - amber
Odor: stench
pH: Not available.
Vapor Pressure: 3 mm Hg @20 deg C
Viscosity: 1.84 mPas 20 deg C
Boiling Point: 173 - 174 deg C @ 7
Freezing/Melting Point: -47 deg C
Autoignition Temperature: 440 deg C ( 824.00 deg F)
Flash Point: 85 deg C ( 185.00 deg F)
Explosion Limits, lower: 5.50 vol %
Explosion Limits, upper: 11.70 vol %
Decomposition Temperature: >120 deg C
Solubility in water: Hydrolysis.
Specific Gravity/Density: 1.2580g/cm3
Molecular Formula: Cl(CH2)3COCl
Molecular Weight: 141.00

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials, light, exposure to moist air or water.
Incompatibilities with Other Materials:
Water, oxidizing agents, strong bases, alcohols, amines.
Hazardous Decomposition Products:
Hydrogen chloride, phosgene, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 4635-59-0: EM1406000
LD50/LC50:
CAS# 4635-59-0: Inhalation, rat: LC50 = 650 mg/m3/4H.
Carcinogenicity:
4-Chlorobutyryl chloride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 22 Harmful if swallowed.
R 23 Toxic by inhalation.
R 35 Causes severe burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 4635-59-0: No information available.
Canada
CAS# 4635-59-0 is listed on Canada's DSL List.
CAS# 4635-59-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4635-59-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/07/1999 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Acetic Acid, Sodium Salt, Anhydrous, P.A. 127-09-3
1400W.dihydrochloride 0-01-1
4,5-Imidazoledicarboxylic Acid, 99% (Titr.) 570-22-9
S-Ethyl-N-[4-(trifluoromethyl)phenyl]-isothiourea.hydrochloride 0-01-1
L(+)-2-Amino-4-Phosphonobutyric Acid 23052-81-5
(+-)-1-Aminoindane-1,5-Dicarboxylic Acid 0-01-1
D(-)-2-Amino-4-Phosphonobutyric Acid 78739-01-2
DL-2-Amino-4-Phosphonobutyric Acid 20263-07-4
L-(+)-2-Amino-3-Phosphonopropionic Acid 23052-80-4
D-(-)-2-Amino-3-Phosphonopropionic Acid 128241-72-5
Ethyl 4-aminobenzoate, 98% 94-09-7
Acetic acid, sodium salt trihydrate, p.a. 6131-90-4
Benzoic acid, sodium salt, 99+% 532-32-1
DL-2-Amino-3-Phosphonopropionic Acid 20263-06-3
cis-Azetidine-2,4-dicarboxylic acid 121050-04-2
(+-)-trans-Azetidinen-2,4-Dicarboxylic Acid 0-01-1
(2R,4R)-(+)-Azetidinen-2,4-Dicarboxylic Acid 161596-63-0
(2S,4S)-(-)-Azetidinen-2,4-Dicarboxylic Acid 0-01-1
Sodium Bicarbonate, P.A. 144-55-8
(RS)-4-Bromo-homo-ibotenic acid 71366-32-0
Sodium borohydride, pellets, 7/16'', 98% (12-13 mm) 16940-66-2
Sodium Bromate, 99+% 7789-38-0
Ammonium Thiocyanate 1762-95-4
3-Cyclohexyl-1-Propanol, 99% 1124-63-6
(2S,3S)-Trans-3-(Carboxymethyl)-Azetidine-2-Acetic Acid 185387-36-4
Sodium bromide, p.a. 7647-15-6
4-(Trifluoromethoxy)benzonitrile 332-25-2
Diltiazem.hydrochloride 33286-22-5
FGIN-1-27 142720-24-9
Dimethyl 2-acetoxyethylphosphonate 39118-50-8
6-alpha-Methylprednisolone, 99% 83-43-2
L-Cysteine hydrochloride hydrate, 98.5%- 101.5% (on the dried basis) 52-89-1
5-Norbornene-2-carboxaldehyde, 90-95% 5453-80-5
Glipizide (USP) 29094-61-9
(+-)-Ibotenic acid 2552-55-8
IDRA 21 22503-72-6
Sodium Carbonate, Anhydrous 497-19-8
1,5-Isoquinolinediol 5154-02-9
Luzindole 117946-91-5
N-Methyl-L-Aspartic Acid 4226-18-0
N-Methyl-D-aspartic acid 6384-92-5
p-Iodophenoxyacetic acid, 97% 1878-94-0
Ammonium meta-vanadate 7803-55-6
Sodium carbonate monohydrate, reagent ACS (granular) 5968-11-6
Sodium chlorate, 99+% 7775-09-9
4-n-Heptyloxybenzoic Acid, 98% 15872-42-1
(S)-(-)-N-(2-Hydroxyethyl)-Alpha-Phenylethylamine, 99% 0-01-1
4-Chlorobutyryl chloride, specialty project grade 4635-59-0
3-Hydroxy-2-methylpyridine, 99% 1121-25-1
Sodium borohydride, powder, 98+%, Morton material !!!Prepak only!!! 16940-66-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net