**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 5968-11-6 |Sodium carbonate monohydrate | ca.100 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Irritating to eyes.Hygroscopic.The toxicological properties of this
material have not been fully investigated.
Potential Health Effects
Eye:
Causes severe eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea.
Inhalation:
Causes respiratory tract irritation. Can produce delayed pulmonary
edema.
Chronic:
Prolonged or repeated inhalation may cause nosebleeds, nasal
congestion, erosion of the teeth, perforation of the nasal septum,
chest pain and bronchitis. Effects may be delayed.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of soap and water for at
least 15 minutes while removing contaminated clothing and shoes. Wash
clothing before reuse.
Ingestion:
Do NOT induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid.
Inhalation:
Remove from exposure to fresh air immediately. If not breathing,
give artificial respiration. If breathing is difficult, give oxygen.
Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Material will not burn. During a fire, irritating
and highly toxic gases may be generated by thermal decomposition or
combustion. Wear appropriate protective clothing to prevent contact
with skin and eyes. Wear a self-contained breathing apparatus (SCBA)
to prevent contact with thermal decomposition products. This
material in sufficient quantity and reduced particle size is capable
of creating a dust explosion.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to
extinguish surrounding fire. Use extinguishing media most appropriate
for the surrounding fire. Use water spray, dry chemical, carbon
dioxide, or appropriate foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation. Use with adequate ventilation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Store
protected from moisture.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR ??1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant a respirator's use.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Crystalline powder
Appearance: colorless to white
Odor: odorless
pH: 11.6 (1% solution)
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 212 deg F
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: 33% in water
Specific Gravity/Density: 2.25
Molecular Formula: Na2CO3.H2O
Molecular Weight: 123.9912
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable. Stable at room temperature in closed containers under normal
storage and handling conditions.
Conditions to Avoid:
Incompatible materials, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Moisture, strong acids, aluminum, fluorine.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide, toxic fumes of sodium oxide.
Hazardous Polymerization: Has not been reported.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 5968-11-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Sodium carbonate monohydrate -
Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
See actual entry in RTECS for complete information.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36 Irritating to eyes.
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 5968-11-6: 1
United Kingdom Occupational Exposure Limits
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 5968-11-6 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 5968-11-6 is not on the TSCA Inventory. It is a hydrate and
exempt from TSCA Inventory requirements (40CFR720.3(u)(2)).
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 6/25/1999 Revision #1 Date: 8/02/2000
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Acetic Acid, Sodium Salt, Anhydrous, P.A.
| 127-09-3 |
|
1400W.dihydrochloride
| 0-01-1 |
|
4,5-Imidazoledicarboxylic Acid, 99% (Titr.)
| 570-22-9 |
|
S-Ethyl-N-[4-(trifluoromethyl)phenyl]-isothiourea.hydrochloride
| 0-01-1 |
|
L(+)-2-Amino-4-Phosphonobutyric Acid
| 23052-81-5 |
|
(+-)-1-Aminoindane-1,5-Dicarboxylic Acid
| 0-01-1 |
|
D(-)-2-Amino-4-Phosphonobutyric Acid
| 78739-01-2 |
|
DL-2-Amino-4-Phosphonobutyric Acid
| 20263-07-4 |
|
L-(+)-2-Amino-3-Phosphonopropionic Acid
| 23052-80-4 |
|
D-(-)-2-Amino-3-Phosphonopropionic Acid
| 128241-72-5 |
|
Ethyl 4-aminobenzoate, 98%
| 94-09-7 |
|
Acetic acid, sodium salt trihydrate, p.a.
| 6131-90-4 |
|
Benzoic acid, sodium salt, 99+%
| 532-32-1 |
|
DL-2-Amino-3-Phosphonopropionic Acid
| 20263-06-3 |
|
cis-Azetidine-2,4-dicarboxylic acid
| 121050-04-2 |
|
(+-)-trans-Azetidinen-2,4-Dicarboxylic Acid
| 0-01-1 |
|
(2R,4R)-(+)-Azetidinen-2,4-Dicarboxylic Acid
| 161596-63-0 |
|
(2S,4S)-(-)-Azetidinen-2,4-Dicarboxylic Acid
| 0-01-1 |
|
Sodium Bicarbonate, P.A.
| 144-55-8 |
|
(RS)-4-Bromo-homo-ibotenic acid
| 71366-32-0 |
|
Sodium borohydride, pellets, 7/16'', 98% (12-13 mm)
| 16940-66-2 |
|
Sodium Bromate, 99+%
| 7789-38-0 |
|
Ammonium Thiocyanate
| 1762-95-4 |
|
3-Cyclohexyl-1-Propanol, 99%
| 1124-63-6 |
|
(2S,3S)-Trans-3-(Carboxymethyl)-Azetidine-2-Acetic Acid
| 185387-36-4 |
|
Sodium bromide, p.a.
| 7647-15-6 |
|
4-(Trifluoromethoxy)benzonitrile
| 332-25-2 |
|
Diltiazem.hydrochloride
| 33286-22-5 |
|
FGIN-1-27
| 142720-24-9 |
|
Dimethyl 2-acetoxyethylphosphonate
| 39118-50-8 |
|
6-alpha-Methylprednisolone, 99%
| 83-43-2 |
|
L-Cysteine hydrochloride hydrate, 98.5%- 101.5% (on the dried basis)
| 52-89-1 |
|
5-Norbornene-2-carboxaldehyde, 90-95%
| 5453-80-5 |
|
Glipizide (USP)
| 29094-61-9 |
|
(+-)-Ibotenic acid
| 2552-55-8 |
|
IDRA 21
| 22503-72-6 |
|
Sodium Carbonate, Anhydrous
| 497-19-8 |
|
1,5-Isoquinolinediol
| 5154-02-9 |
|
Luzindole
| 117946-91-5 |
|
N-Methyl-L-Aspartic Acid
| 4226-18-0 |
|
N-Methyl-D-aspartic acid
| 6384-92-5 |
|
p-Iodophenoxyacetic acid, 97%
| 1878-94-0 |
|
Ammonium meta-vanadate
| 7803-55-6 |
|
Sodium carbonate monohydrate, reagent ACS (granular)
| 5968-11-6 |
|
Sodium chlorate, 99+%
| 7775-09-9 |
|
4-n-Heptyloxybenzoic Acid, 98%
| 15872-42-1 |
|
(S)-(-)-N-(2-Hydroxyethyl)-Alpha-Phenylethylamine, 99%
| 0-01-1 |
|
4-Chlorobutyryl chloride, specialty project grade
| 4635-59-0 |
|
3-Hydroxy-2-methylpyridine, 99%
| 1121-25-1 |
|
Sodium borohydride, powder, 98+%, Morton material !!!Prepak only!!!
| 16940-66-2 |
|
|