Search   
MSDS 
:
 N,N'-bis(2-aminoethyl)-1,3-propanediamine, 97% (titr.)
CAS 
:
 4741-99-5
SYNONYMS 
:
 1,3-Propanediamine, N,N'-bis(2-aminoethyl)-;     N,N'-Bis(2-aminoethyl)propane-1,3-diamine
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 4741-99-5 |N,N'-Bis(2-aminoethyl)-1,3-propanediam| 97 | 225-254-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold
and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause perforation of the digestive
tract. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Inhalation may be
fatal as a result of spasm, inflammation, edema of the larynx and
bronchi, chemical pneumonitis and pulmonary edema. May cause
systemic effects. May cause burning sensation, coughing, wheezing,
laryngitis, shortness of breath, headache, nausea, and vomiting.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do not use
mouth-to-mouth resuscitation if victim ingested or inhaled the
substance; induce artificial respiration with the aid of a pocket
mask equipped with a one-way valve or other proper respiratory
medical device.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Vapors may
be heavier than air. They can spread along the ground and collect
in low or confined areas.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam. Water may be ineffective.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill using an absorbent, non-combustible material such as
earth, sand, or vermiculite. Do not use combustible materials such
as sawdust. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Do not get in
eyes, on skin, or on clothing. Keep container tightly closed. Do not
ingest or inhale. Use and store under nitrogen. Use only in a
chemical fume hood. Discard contaminated shoes. Do not breathe vapor.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Corrosives area. Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 4741-99-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: clear colorless
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 280 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Not available.
Specific Gravity/Density: .9600g/cm3
Molecular Formula: C7H20N4
Molecular Weight: 160.26

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 4741-99-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
N,N'-Bis(2-aminoethyl)-1,3-propanediamine -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.*
Hazard Class: 8
UN Number: 2735
Packing Group: III
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: III
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 4741-99-5: No information available.
Canada
CAS# 4741-99-5 is listed on Canada's DSL List.
CAS# 4741-99-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4741-99-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 8/24/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
3-Chloro-4'-Fluoropropiophenone, 98% 347-93-3
4-Ethylaniline, 99+% 589-16-2
1,6-Hexanediol 629-11-8
6-Amino-M-Toluenesulfonic Acid, 99% 88-44-8
Methyl 3-mercaptopropionate, 98% 2935-90-2
1,4-Dihydroxyanthraquinone, 96% 81-64-1
Methyl 2-(chlorosulfonyl)benzoate, tech., 90% 26638-43-7
9,10-Dihydrobenzo(a)Pyren-7(8H)-One, 97% 3331-46-2
1,2,5-Trimethylpyrrole,99% 930-87-0
4-Acetamidothiophenol, 95% 1126-79-0
Praseodymium atomic absorption standard solution, 1 mg/ml Pr in 2% 7440-10-0
(R)-(-)-N-(3,5-Dinitrobenzoyl)-Alpha-Phenylglycine, 99% 74927-72-3
Phenyl Beta-D-Glucopyranoside, 98% 1464-44-4
DL-3,4-Dihydroxymandelic Acid, 98% 14883-87-5
N,N'-bis(2-aminoethyl)-1,3-propanediamine, 97% (titr.) 4741-99-5
L-2-Fluorophenylalanine hemihydrate, 99.5% (e.e.)
Butyl Levulinate, 98% 2052-15-5
DL-3-Methylenecyclopropane-Trans-1,2-Dicarboxylic Acid, 98% (Titr.) 499-02-5
1,1-Diphenylacetone, 99+% 781-35-1
4-Pyridylcarbinol, 99% 586-95-8
N,N-Dimethyldodecylamine (Pract) 112-18-5
(r)-(+)-Bis-(1,2-Diphenylphosphino)Propane Tech., 93% (TLC) 67884-32-6
4-Methoxy-2(5H)-Furanone, 97% 69556-70-3
Fullerene c60, 99.9% (hplc) 99685-96-8
Butyl methacrylate, 99%, Stabilized with 25ppm Methylhydroquinone 97-88-1
1H-Tetrazole, 99+% 288-94-8
5-Bromoindoxyl Diacetate, 99% 33588-54-4
N,n,n',n'-tetramethylbenzidine,97.5% 366-29-0
Perfluorooctyl iodide, 99% 507-63-1
9-Fluorenemethanol,99% 24324-17-2
3,3-Dimethylpentane, 99% 562-49-2
Dipropyl Phthalate, 99+% (gc) 131-16-8
Sodium Ethoxide, 96+% 141-52-6
Fluoxymesterone, 97.0-102.0% hplc (on dry substance) 76-43-7
L-(-)-Carvone, 99+% (GC) 6485-40-1
2-(3-Bromophenyl)-1,3-dioxolane, 95% 17789-14-9
2-Oxooctanenitrile, tech. 80997-84-8
4-Hydroxypiperidine, 97%, contains varying amounts of moisture 5382-16-1
2-Ethyl-1-hexanol 104-76-7
N-(2,6-Diethylphenylcarbamoyl-Methyl)-Iminodiacetic Acid, 99% 0-00-1
4-Methoxy-7-Methyl-5H-Furo(3,2-g)(1)-Benzopyran-5-One, 97% (Visnagin) 82-57-5
N-Benzyloxycarbonyl-L-Glutamic Acid 99% 1155-62-0
p-Phenylenediacetonitrile, 97% 622-75-3
3-(Trimethoxysilyl)propyl methacrylate, 98% 67-56-1
Ethyl Heptafluorobutyrate, 97% 356-27-4
Trifluoroacetic Acid, Sodium Salt, 97% 2923-18-4
2,2-Dimethyl-4-methoxycarbonyl-2H-imidazole-1-oxide, 99% 0-00-1
Ethyl p-toluenesulfonate (pract), 85% (GC) 80-22-8
3,4-Difluorophenylacetonitrile, 97+% (GC) 658-99-1
Di-n-octyl phthalate, 95% (gc) 117-84-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net