Search   
MSDS 
:
 Methyl 4-hydroxybenzoate, sodium salt, 99.0-102.0%
CAS 
:
 5026-62-0
SYNONYMS 
:
 Methylparaben, sodium salt; Benzoate, 4-oxide-, methyl, sodium salt;     Benzoic acid, 4-hydroxy-, methyl ester, sodium salt; Benzoic acid,     p-hydroxy-, methyl ester, sodium derivative; Methyl     p-hydroxybenzoate, sodium salt; Sodium 4-(methoxycarbonyl)phenolate
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 5026-62-0 |Methyl 4-hydroxybenzoate, sodium salt | 99 | 225-714-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed.Hygroscopic (absorbs moisture from the air).The
toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Remove
contaminated clothing and shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Do NOT get water inside containers. Use water spray, dry chemical,
carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Sweep up, then place into a suitable container for disposal. Avoid
generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Avoid ingestion and inhalation. Keep from contact with
moist air and steam.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Store
protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 5026-62-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: soluble in water
Specific Gravity/Density: Not available.
Molecular Formula: C8H7O3Na
Molecular Weight: 174.13

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants, exposure to moist air or
water.
Incompatibilities with Other Materials:
Moisture.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 5026-62-0: DH2455000
LD50/LC50:
CAS# 5026-62-0: Oral, mouse: LD50 = 2 gm/kg.
Carcinogenicity:
Methyl 4-hydroxybenzoate, sodium salt -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 5026-62-0: 1
Canada
CAS# 5026-62-0 is listed on Canada's DSL List.
CAS# 5026-62-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 5026-62-0 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Acetophenone, 99% 98-86-2
N-Ethyl-N-Hydroxyethylaniline, 96% 92-50-2
2-Amino-2-ethyl-1,3-propanediol, 97% 115-70-8
Acetyl chloride, p.a. 75-36-5
o-Benzylhydroxylamine hydrochloride,99% 2687-43-6
Bromocresol Purple, Water Soluble, Indicator Grade 62625-30-3
2-Bromoethylbenzene, 98% 1973-22-4
Ethyl (Z)-3-Bromo-2-Propenoate, 99% 31930-34-4
Calix[8]Arene, 97% (Elemental Analysis) 82452-93-5
D(+)-Camphoric acid, 99% 124-83-4
1,1'-Carbonyldiimidazole, 97% 530-62-1
Celatom FW-14 60676-86-0
Chalkone, 97% 94-41-7
4-Cyanophenol, 99% 767-00-0
Tetranitro Blue Tetrazolium Chloride Contains Ethanol of 1184-43-6
Cyclohexyl isocyanide, 99% 931-53-3
2,4-Dichlorobenzoic acid, 98% 50-84-0
2,4-Dichlorophenylacetic Acid, 99% 19719-28-9
3,4-Dimethoxyacetophenone, 98% (GC) 1131-62-0
2,3-Dimethoxybenzoic Acid, 99% 1521-38-6
Dimethyl isophthalate (Pract) 1459-93-4
1,2-Diphenylhydrazine 97% 122-66-7
Dl-Norleucine, 98% 616-06-8
1-(4-Methoxyphenyl)Piperazine, 96% (GC) 38212-30-5
Ethyl 2-Amino-4-Thiazoleacetate, 99% 53266-94-7
4-Fluoro-alpha-cyclopropyl-alpha-- 427-53-2
2,4-Pentanedione, 99+% 123-54-6
Itaconic Acid, 99+% 97-65-4
N-Benzyl-N-Ethylaniline, 99+% 92-59-1
2,3-Dibromosuccinic acid, 95% (titr.) 526-78-3
Methyl 4-hydroxybenzoate, sodium salt, 99.0-102.0% 5026-62-0
Methyl 4-tert-butylbenzoate, 99% 26537-19-9
Trifluoroacetic Acid-D, 99.5 Atom % D 599-00-8
3-Nitrobenzaldehyde, 99% 99-61-6
2-Nitro-2-methyl-1,3-propanediol, 99% 77-49-6
l-2-Octanol, 99+% 5978-70-1
o-Nitrocinnamic acid, 97%, predominantly trans 612-41-9
Acetone-d6, 99.8 atom % D 666-52-4
3-Picolyl chloride hydrochloride, 99% 6959-48-4
Acacia 9000-01-5
Potassium Hydride, 20-25% wt.% Dispersion in Mineral Oil 7693-26-7
Propionaldehyde, 99+% 123-38-6
Trifluoroacetic Acid-D, Packaged in 1ml Ampules, 99.5 Atom % D 599-00-8
Nitromethane-d3, packaged in 1.00 ml ampules, 99 atom % D 13031-32-8
Sudan ii 3118-97-6
3Tert.-Butylamine, 99% 75-64-9
Tetrabutylammonium fluoride, 1M solution in THF, containing less than 109-99-9
Tetraphenylphosphonium Bromide, 99% 2751-90-8
Tosylmethyl Isocyanide, 98% 36615-45-9
9-Vinylanthracene 2444-68-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net