Search   
MSDS 
:
 Octyltrichlorosilane, 97%
CAS 
:
 5283-66-9
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 5283-66-9 |Octyltrichlorosilane | 97% | 226-112-1 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: F C
Risk Phrases: 11 14 35

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Highly flammable. Reacts violently with water. Causes severe
burns.Moisture sensitive.Corrosive.

Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal
damage.
Skin:
Causes skin burns. May cause cyanosis of the extremities. May cause
skin rash (in milder cases), and cold and clammy skin with cyanosis
or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May cause kidney damage. May cause
perforation of the digestive tract. Ingestion of large amounts may
cause CNS depression. May cause blood abnormalities. May cause
cardiac abnormalities. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. May cause kidney
damage. Aspiration may lead to pulmonary edema. Vapors may cause
dizziness or suffocation. May cause blood changes. May cause cardiac
abnormalities. May cause systemic effects. Inhalation at high
concentrations may cause CNS depression and asphixiation. May cause
burning sensation in the chest.
Chronic:
Effects may be delayed. May cause kidney damage.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a
fire, irritating and highly toxic gases may be generated by thermal
decomposition or combustion. Will burn if involved in a fire. Use
water spray to keep fire-exposed containers cool. Containers may
explode in the heat of a fire. Flammable liquid and vapor. Vapors
may be heavier than air. They can spread along the ground and
collect in low or confined areas. Runoff from fire control or
dilution water may cause pollution.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or
alcohol-resistant foam. For large fires, use water spray, fog, or
alcohol-resistant foam. Use water spray to cool fire-exposed
containers. Water may be ineffective. Do NOT get water inside
containers. Do NOT use straight streams of water.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation. Do
not get water inside containers. A vapor suppressing foam may be
used to reduce vapors.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use only in a well-ventilated area. Ground and bond containers when
transferring material. Use spark-proof tools and explosion proof
equipment. Do not breathe dust, vapor, mist, or gas. Do not get in
eyes, on skin, or on clothing. Empty containers retain product
residue, (liquid and/or vapor), and can be dangerous. Keep container
tightly closed. Keep away from heat, sparks and flame. Do not ingest
or inhale. Do not allow contact with water. Discard contaminated
shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or
expose empty containers to heat, sparks or open flames. Keep from
contact with moist air and steam.
Storage:
Keep away from sources of ignition. Keep container closed when not
in use. Flammables-area. Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 5283-66-9:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: 1.9 cP 25.00 deg C
Boiling Point: 233 deg C @ 731.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 13 deg C ( 55.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: reacts
Specific Gravity/Density: 1.0700g/cm3
Molecular Formula: C8H17Cl3Si
Molecular Weight: 247.67

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable at room temperature in closed containers under normal storage
and handling conditions. Moisture sensitive.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture, excess heat,
strong oxidants.
Incompatibilities with Other Materials:
Moisture, oxidizing agents, bases, alcohols.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide, silicon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 5283-66-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Octyltrichlorosilane -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: OCTYLTRICHLOROSILANE
Hazard Class: 8
UN Number: 1801
Packing Group: II
IMO
Shipping Name: OCTYLTRICHLOROSILANE
Hazard Class: 8
UN Number: 1801
Packing Group: II
RID/ADR
Shipping Name: OCTYLTRICHLOROSILANE
Hazard Class: 8
UN Number: 1801
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F C
Risk Phrases:
R 11 Highly flammable.
R 14 Reacts violently with water.
R 35 Causes severe burns.
Safety Phrases:
S 7/9 Keep container tightly closed and in a
well-ventilated place.
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 33 Take precautionary measures against static
discharges.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 5283-66-9: No information available.
Canada
CAS# 5283-66-9 is listed on Canada's DSL List.
CAS# 5283-66-9 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 5283-66-9 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #6 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Glycidol, tech. 556-52-5
N-(2-Chloroacetyl)-L-tyrosine 1145-56-8
Acriflavine hydrochloride 23-24.5% chlorin e 8063-24-9
4-Nitrosodiphenylamine, Tech. 75% Remainder Water 156-10-5
4-Nitrophenylhydrazine hydrochloride, 98% (titr.) 636-99-7
4-Pyrrolidinopyridine, 98% 2456-81-7
(4-Fluorophenyl)acetone, 98% 459-03-0
N-(4-Pyridyl)-Pyridinium Chloride Hydrochloride, Tech. 5421-92-1
4-Hydroxyvalerophenone 2589-71-1
2,5-Dimethylaniline, 99% 95-78-3
4-Phenylmorpholine, 98+% 92-53-5
Tributylphosphine oxide, 98% 814-29-9
5-Methoxygramine, 99% 16620-52-3
Durene-Alpha-1,Alpha-2-Dithiol, 97% 10230-61-2
(-)-Di-P-Toluoyl-L-Tartaric Acid, 97% 32634-66-5
Cyclopropyl Carbinol, 98% 2516-33-8
Octyltrichlorosilane, 97% 5283-66-9
(-)-Caryophyllene Oxide, 97% 13877-94-6
4-Acetamidoantipyrine, 97% 83-15-8
(-)-(2S,8AR)-(Camphorylsulfonyl)Oxaziridine, 99+% (99+% e.e.) 104372-31-8
Ethyl 2-Bromo-3-Methylbutyrate, 95% (GC) 609-12-1
Azadirachtin, 98% (HPLC) 11141-17-6
Heptamethyldisilazane, 99% 920-68-3
1-Nonen-3-Ol, 98% 21964-44-3
N-Methylanthranilic acid, 90%, balance mainly anthranilic acid 118-92-3
(Methylthio)-acetonitrile, 99% 35120-10-6
Alpha-Bromo-3'-Nitroacetophenone, 97% 2227-64-7
D(-)-Salicin, 99+% 138-52-3
Palatine Fast Yellow Bln 10127-05-6
3,3-Dichloro-2-Hydroxytetrahydropyran, 99+% 0-00-1
Ethyl isodehydracetate, 97% 3385-34-0
1-(3-Chloropropyl)-1,3-dihydro-2H-benzimidazol-2-one, balance mainly 62780-89-6
4-Amino-1,1-diethoxy-2-butyne, 96% 124744-14-
2-Amino-3-Chloro-5-Trifluoromethylpyridine 98% 79456-26-1
m-Xylylenediamine, 99% 1477-55-0
Allyl methyl sulfide, 99% 10152-76-8
5-Bromo-2-Fluorobenzonitrile, 97% 179897-89-3
2,9-Dimethyl-4,7-Diphenyl-1,10-Phenanthroline, 98% 4733-39-5
Poly(butadiene), phenyl terminated 25038-44-2
2-tert-Butylphenol, 99% 88-18-6
D(+)-Fucose, 99% 3615-37-0
o-Tolidine 119-93-7
1-Bromopentadecane, 98% 629-72-1
Piperazine hexahydrate, 98% 142-63-2
4-(5)-Nitroindan, Mixture
Ouabain Octahydrate, 96.0 -104.0% (On the Anhydrous Substance) 11018-89-6
Homovanillyl alcohol, 99% 2380-78-1
4-Methylimidazole, 98% 822-36-6
Levamisole hydrochloride, 99+% 16595-80-5
1,3-Butanediol, 99% 107-88-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net