Search   
MSDS 
:
 1-Bromopentadecane, 98%
CAS 
:
 629-72-1
SYNONYMS 
:
 Pentadecyl Bromide.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 629-72-1 |1-Bromopentadecane | 98% | 211-104-2 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Will burn
if involved in a fire. Vapors may be heavier than air. They can
spread along the ground and collect in low or confined areas. Runoff
from fire control or dilution water may cause pollution.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use water spray,
dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Always use
a NIOSH or European Standard EN 149 approved
respirator when necessary.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear very slight yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: <1 mmHg @ 20 C
Viscosity: Not available.
Boiling Point: 159.0 - 160.0 deg C @ 5.00mmH
Freezing/Melting Point: 18.20 - 18.70 deg C
Autoignition Temperature: Not applicable.
Flash Point: > 112 deg C (> 233.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.0050g/cm3
Molecular Formula: C15H31Br
Molecular Weight: 291.30

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, excess heat.
Incompatibilities with Other Materials:
Strong bases, oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 629-72-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-Bromopentadecane -
Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 629-72-1: No information available.
United Kingdom Occupational Exposure Limits

United Kingdom Maximum Exposure Limits

Canada
CAS# 629-72-1 is listed on Canada's NDSL List.
CAS# 629-72-1 is not listed on Canada's Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 629-72-1 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #4 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Glycidol, tech. 556-52-5
N-(2-Chloroacetyl)-L-tyrosine 1145-56-8
Acriflavine hydrochloride 23-24.5% chlorin e 8063-24-9
4-Nitrosodiphenylamine, Tech. 75% Remainder Water 156-10-5
4-Nitrophenylhydrazine hydrochloride, 98% (titr.) 636-99-7
4-Pyrrolidinopyridine, 98% 2456-81-7
(4-Fluorophenyl)acetone, 98% 459-03-0
N-(4-Pyridyl)-Pyridinium Chloride Hydrochloride, Tech. 5421-92-1
4-Hydroxyvalerophenone 2589-71-1
2,5-Dimethylaniline, 99% 95-78-3
4-Phenylmorpholine, 98+% 92-53-5
Tributylphosphine oxide, 98% 814-29-9
5-Methoxygramine, 99% 16620-52-3
Durene-Alpha-1,Alpha-2-Dithiol, 97% 10230-61-2
(-)-Di-P-Toluoyl-L-Tartaric Acid, 97% 32634-66-5
Cyclopropyl Carbinol, 98% 2516-33-8
Octyltrichlorosilane, 97% 5283-66-9
(-)-Caryophyllene Oxide, 97% 13877-94-6
4-Acetamidoantipyrine, 97% 83-15-8
(-)-(2S,8AR)-(Camphorylsulfonyl)Oxaziridine, 99+% (99+% e.e.) 104372-31-8
Ethyl 2-Bromo-3-Methylbutyrate, 95% (GC) 609-12-1
Azadirachtin, 98% (HPLC) 11141-17-6
Heptamethyldisilazane, 99% 920-68-3
1-Nonen-3-Ol, 98% 21964-44-3
N-Methylanthranilic acid, 90%, balance mainly anthranilic acid 118-92-3
(Methylthio)-acetonitrile, 99% 35120-10-6
Alpha-Bromo-3'-Nitroacetophenone, 97% 2227-64-7
D(-)-Salicin, 99+% 138-52-3
Palatine Fast Yellow Bln 10127-05-6
3,3-Dichloro-2-Hydroxytetrahydropyran, 99+% 0-00-1
Ethyl isodehydracetate, 97% 3385-34-0
1-(3-Chloropropyl)-1,3-dihydro-2H-benzimidazol-2-one, balance mainly 62780-89-6
4-Amino-1,1-diethoxy-2-butyne, 96% 124744-14-
2-Amino-3-Chloro-5-Trifluoromethylpyridine 98% 79456-26-1
m-Xylylenediamine, 99% 1477-55-0
Allyl methyl sulfide, 99% 10152-76-8
5-Bromo-2-Fluorobenzonitrile, 97% 179897-89-3
2,9-Dimethyl-4,7-Diphenyl-1,10-Phenanthroline, 98% 4733-39-5
Poly(butadiene), phenyl terminated 25038-44-2
2-tert-Butylphenol, 99% 88-18-6
D(+)-Fucose, 99% 3615-37-0
o-Tolidine 119-93-7
1-Bromopentadecane, 98% 629-72-1
Piperazine hexahydrate, 98% 142-63-2
4-(5)-Nitroindan, Mixture
Ouabain Octahydrate, 96.0 -104.0% (On the Anhydrous Substance) 11018-89-6
Homovanillyl alcohol, 99% 2380-78-1
4-Methylimidazole, 98% 822-36-6
Levamisole hydrochloride, 99+% 16595-80-5
1,3-Butanediol, 99% 107-88-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net