Search   
MSDS 
:
 Dioctyl sulfosuccinate, sodium salt, 96%
CAS 
:
 577-11-7
SYNONYMS 
:
 Dioctyl sodium sulfosuccinate; bis(2-ethylhexyl)sulfosuccinic acid     sodium salt
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 577-11-7 |Dioctyl sodium sulfosuccinate | 100 | 209-406-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN C
Risk Phrases: 22 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Causes burns.Corrosive.

Potential Health Effects
Eye:
Causes severe eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause burns to the digestive tract. May be harmful if swallowed.
Inhalation:
Inhalation of dust may cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
Wear appropriate protective clothing to prevent contact with skin
and eyes. Wear a self-contained breathing apparatus (SCBA) to
prevent contact with thermal decomposition products. This material
in sufficient quantity and reduced particle size is capable of
creating a dust explosion.
Extinguishing Media:
For small fires, use water spray, dry chemical, carbon dioxide or
chemical foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Do not ingest or
inhale.
Storage:
Store in a tightly closed container. Keep from contact with
oxidizing materials. Store in a cool, dry, well-ventilated area away
from incompatible substances. Keep away from acids. Keep away from
strong bases.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 577-11-7:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: white
Odor: characteristic odor.
pH: Not available.
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 153.00 - 157.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Slightly soluble.
Specific Gravity/Density:
Molecular Formula: C20H37O7SNa
Molecular Weight: 444.55

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable.
Conditions to Avoid:
Dust generation, strong acids, strong oxidants, bases.
Incompatibilities with Other Materials:
Strong acid, strong bases and strong oxidizers.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide, sodium oxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 577-11-7: WN0525000
LD50/LC50:
CAS# 577-11-7: Draize test, rabbit, eye: 250 ug Mild; Draize test,
rabbit, eye: 1% Severe; Draize test, rabbit, skin: 10 mg/24H
Moderate; Oral, mouse: LD50 = 2643 mg/kg; Oral, rat: LD50 = 1900
mg/kg.
Carcinogenicity:
Dioctyl sodium sulfosuccinate -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN C
Risk Phrases:
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 577-11-7: 2
Canada
CAS# 577-11-7 is listed on Canada's DSL List.
CAS# 577-11-7 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 577-11-7 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 7/08/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
5-Amino-4-carbethoxy-1-phenylpyrazole, 98% 16078-71-0
1,1,2,2-Tetrabromoethane, 98% 79-27-6
(Methyl sulfoxide)-d6, packaged in 0.50 ml ampules, 99.9 atom % D 2206-27-1
Cyclohexane-D12, Packaged in 1ml Ampules, 99.5 Atom % D 1735-17-7
Alpha, Alpha-Diphenyl-4-Piperidinomethanol 98+% (TLC) 115-46-8
Acetic-D3 Acid-D, Packaged in 1ml Ampules, 99.5 Atom% D 1186-52-3
Acrylamide, 99+%, Electrophoresis Grade 79-06-1
Acetonitrile-d3 75-05-8
Trans-2-Pentenal, 97% 1576-87-0
Adipic acid, 99% 124-04-9
Dioctyl sulfosuccinate, sodium salt, 96% 577-11-7
(R)-Glycidyl Butyrate, 92-94%(GC) 60456-23-7
Perfluoro(methylcyclohexane), 90% 355-02-2
Rhodium(III) acetylacetonate 4447-60-3
2-Amino-5-Bromopyridine, 97% 1072-97-5
N-Benzyl-N-Methylethanolamine, 90% 101-98-4
1,8-Bis(Hydroxymethyl)Naphthalene, 99% 2026-08-6
Potassium Superoxide, Catalyzed Granules, 3.5-5 mesh 12030-88-5
Methylenecyclohexane, 98% 1192-37-6
3-Chloroanisole 2845-89-8
Urethane, 97% 51-79-6
Acetaldehyde, 99.5% 75-07-0
Tetramethylurea-D12, 99+ Atom % D 51219-89-7
Trans,Trans-2,4-Hexadien-1-ol, 99% 17102-64-6
4-Amino-3-Chlorobenzonitrile, 97% 21803-75-8
n-Methyloctylamine, 98% 2439-54-5
Diethyl 1,3-Acetonedicarboxylate, 95% 105-50-0
d-(-)-Tartaric acid(unnatural tartaric acid), 99% 147-71-7
2,7-Dimethylnaphthalene, 99% 582-16-1
Agar, Powder 9002-18-0
Methyl 4-Methoxycarbonylbenzoylacetate, 95% 0-01-1
Pent-4-enoic Anhydride 63521-92-6
Agarose, Pure Powder (MR = -0.13+/- 0.005) 9012-36-6
Methyl alcohol HPLC gradient grade 67-56-1
Albumin, egg (powder) 9006-59-1
Gibberellic Acid, 99% (Titr.) 77-06-5
1-Piperazinecarboxaldehyde, 98% 7755-92-2
Cerium(IV) sulfate, complex with sulfuric acid, Ce ca. 28% 17106-39-7
alpha-Chloralose, 97% 15879-93-3
2-Ketoglutaric acid, 98% 328-50-7
Ethyl 3,4-Dihydroxybenzoate, 97% 3943-89-3
alpha-Terpineol, mixture of isomers, 98% 98-55-5
Trimethylamine hydrochloride, 98% 593-81-7
Aurintricarboxylic acid ammonium salt 569-58-4
2',6'-Dimethylacetanilide, 97% 2198-53-0
Aluminum ammonium sulfate dodecahydrate, reagent (crystals), 99% 7784-26-1
Propyl Benzoate, 99% 2315-68-6
Aluminum chloride, anhydrous, powder, 98.5% 7446-70-0
D-(-)Asparagine Monohydrate, 99% 2058-58-4
7-Methyladenine, 98% 935-69-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net