Search   
MSDS 
:
 Perchloromethyl mercaptan, 97%
CAS 
:
 594-42-3
SYNONYMS 
:
 Trichloromethanesulfenyl chloride.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 594-42-3 |Perchloromethyl mercaptan | 97 | 209-840-4 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T+
Risk Phrases: 21 25 26 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful in contact with skin. Toxic if swallowed. Very toxic by
inhalation. Causes burns.Moisture sensitive.

Potential Health Effects
Eye:
Causes eye burns. Lachrymator (substance which increases the flow
of tears).
Skin:
Causes skin burns. May be harmful if absorbed through the skin.
Ingestion:
Harmful if swallowed. Causes gastrointestinal tract burns.
Inhalation:
May be fatal if inhaled. Causes chemical burns to the respiratory
tract.
Chronic:
May cause liver and kidney damage.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
POISON material. If inhaled, get medical aid immediately. Remove
victim to fresh air. If not breathing, give artificial respiration.
If breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 594-42-3:
United States OSHA: 0.1 ppm TWA; 0.8 mg/m3 TWA
Belgium - TWA: 0.1 ppm VLE; 0.77 mg/m3 VLE
France - VME: 0.1 ppm VME; 0.8 mg/m3 VME
Germany: 0.8 mg/m3 TWA
Malaysia: 0.1 ppm TWA; 0.76 mg/m3 TWA
Netherlands: 0.1 ppm MAC; 0.8 mg/m3 MAC
Russia: 1 mg/m3 TWA
Spain: 0.1 ppm VLA-ED; 0.77 mg/m3 VLA-ED

Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: yellow
Odor: stench
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 146 - 148 deg C @ 760 mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.7000g/cm3
Molecular Formula: CCl3SCl
Molecular Weight: 185.88

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Moisture, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 594-42-3: PB0370000
LD50/LC50:
CAS# 594-42-3: Dermal, guinea pig: LD50 = 500 uL/kg; Draize test,
rabbit, eye: 50 ug/24H Severe; Draize test, rabbit, skin: 500 mg/24H
Severe; Inhalation, mouse: LC50 = 296 mg/m3/2H; Inhalation, rat: LC50
= 11 ppm/1H; Oral, mouse: LD50 = 400 mg/kg; Oral, rat: LD50 = 82600
ug/kg; Skin, rabbit: LD50 = 1410 mg/kg.
Carcinogenicity:
Perchloromethyl mercaptan -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: PERCHLOROMETHYL MERCAPTAN
Hazard Class: 6.1
UN Number: 1670
Packing Group:
IMO
Shipping Name: PERCHLOROMETHYL MERCAPTAN
Hazard Class: 6.1
UN Number: 1670
Packing Group: I
RID/ADR
Shipping Name: PERCHLOROMETHYL MERCAPTAN
Hazard Class: 6.1
UN Number: 1670
Packing group: I
USA RQ: CAS# 594-42-3: 100 lb final RQ; 45.4 kg final RQ

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T+
Risk Phrases:
R 21 Harmful in contact with skin.
R 25 Toxic if swallowed.
R 26 Very toxic by inhalation.
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 594-42-3: No information available.
Canada
CAS# 594-42-3 is listed on Canada's NDSL List.
CAS# 594-42-3 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 594-42-3 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/04/2003 Revision #0 Date: Original.

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-CYANONAPHTHALENE, TECH. 86-53-3
1,4-DICYANO-2-BUTENE, 97% 1119-85-3
4-METHOXY-2-METHYLANILINE, 98% 102-50-1
Perchloromethyl mercaptan, 97% 594-42-3
2,4,5-Trichloroaniline, tech., 97% 636-30-6
2,4,6-Trimethylphenol, 99% 527-60-6
n-Undecyl cyanide, 94% 2437-25-4
2-Methoxy-5-methylaniline, 95% 120-71-8
4-Chloro-o-phenylenediamine, 96% 95-83-0
2-[4-(4-Dimethylaminophenyl)-1,3-butadieny 8903-71-1
Hexachloro-1,3-butadiene, 98% 87-68-3
p-Nitrosophenol 104-91-6
STEARONITRILE TECHN. 90+% 638-65-3
Fumaronitrile, 98% 764-42-1
2-Thiopheneacetonitrile, tech., 94% 20893-30-5
Bis(carboxymethyl) trithiocarbonate, 98% 6326-83-6
5-METHOXY-1,3,4-TRIPHENYL-4,5-DIHYDRO-1H-1,2,4-TRIAZOLIN 0-01-1
3,3'-Thiodipropionitrile 111-97-7
Methylenaminoacetonitrile, 98% 109-82-0
2,2,4,4,6,8,8-Heptamethylnonane, 98% 4390-04-9
N-(2-Aminoethyl)pyrrolidine, 99% 7154-73-6
4-Chloro-2-methoxy-5-methylaniline, tech., 85% 6376-14-3
3-Chloro-4-nitroaniline, 97% 825-41-2
2-Chloro-1,3,2-dioxaphospholane, 97% 822-39-9
Tetraisopropylthiuram disulfide, 98% 4136-91-8
6-Hydroxyflavone 6665-83-4
7-Hydroxyflavone 6665-86-7
2-Chloro-1,4-benzoquinone, 95% 695-99-8
2,6-Dimethoxy-1,4-benzoquinone, 97% 530-55-2
2'-Hydroxy-5'-methoxyacetophenone, 99% 705-15-7
6-NITROINDOLINE 19727-83-4
2-Chlorophenol, 98+% 95-57-8
3,4,5,6-TETRACHLOROPHTHALIMIDE 1571-13-7
Diethyl(phthalimidomethyl)phosphonate, 97% 33512-26-4
4-Butoxy-2-nitroaniline, 99% 3987-86-8
4-Chloro-1,2-phenylenediamine, 97% 95-83-0
Silica gel, 3-6 mm, pore diameter ca. 9 nm 7631-86-9
Ethylenediaminetetraacetic acid dicopper salt, tetrahydrate, 98% 39208-15-6
Diphenylselenium dichloride, 97% 2217-81-4
2-Bromostearonitrile 0-01-1
4-Chlorophenyl methyl sulfide, 98% 123-09-1
N-Cyclohexylaniline, 98% 1821-36-9
3-Amino-4-chlorobenzenesulfonic acid hydrate, 97% 98-36-2
2-Hexenedinitrile 13042-02-9
4-Methylsulphonylbenzyl bromide, tech, 75-80% 53606-06-7
L-1,2,3,4-Tetrahydroisoquinoline-3-Carboxylic Acid, 98% 74163-81-8
Titanium(III) chloride, Al reduced, 98% 12003-13-3
Ethyl-3-Indoleacetate, 99% 778-82-5
1-Acetylindole, 98% 576-15-8
5-Fluoroindole-2-carboxylic acid, 98% 399-76-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net