Search   
MSDS 
:
 Naphthenic acids sodium salts (pract)
CAS 
:
 61790-13-4
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 61790-13-4 |Sodium naphthenate | 100 | 263-108-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and
drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up or absorb material, then place into a
suitable clean, dry, closed container for disposal. Avoid generating
dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Minimize dust
generation and accumulation. Avoid contact with eyes, skin, and
clothing. Keep container tightly closed. Avoid ingestion and
inhalation.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible
substances. Keep containers tightly closed.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 61790-13-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crysatalline Solid
Color: yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature: Not available.
Solubility in water: Soluble.
Specific Gravity/Density: Not available.
Molecular Formula: Not applicable.
Molecular Weight:

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 61790-13-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Sodium naphthenate -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 61790-13-4: No information available.
Canada
CAS# 61790-13-4 is listed on Canada's DSL List.
CAS# 61790-13-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 61790-13-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/30/1998 Revision #5 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
4-Aminoantipyrine Hydrochloride, 99% (Titr.) 22198-72-7
n-Phenylmaleimide, 97% 941-69-5
(R)-(-)-3-Quinuclidinol, 99+% (GC) 25333-42-0
(+)-N-Methylephedrine, 98% 42151-56-4
4-Methoxy-3-pyrrolin-2-one, 99+% 69778-83-2
5-Iodouracil, 99% 696-07-1
2,2-Dimethyl-6,6,7,7,8,8,8-Heptafluoro-3,5-Octanedione, 98% 17587-22-3
Chloromethyl pivalate, 99+% 18997-19-8
18-Crown-6 Acetonitrile Complex, Mole Ratio 2.0 +/-0.2 to 1.0 55075-35-9
9-Cyanophenanthrene 2510-55-6
Isobutyramide, 99% 563-83-7
Ethyl (2S,3S)-2,3-epoxy-3-methylpropanoate 99% 110508-08-2
Butyl pbd, scintillation grade 15082-28-7
N-Alpha-Benzoyl-L-Arginine Amide Hydrochloride Monohydrate, 99% 965-03-7
2,4-Dinitrodiphenylamine, 98% 961-68-2
Methyl tetrahydrofurfuryl ether 19354-27-9
2,2,5,5-Tetramethyl-4-Phenacetyliden Imidazolidine-1-Oxyl, Free 84271-26-1
Gramine, 99% 87-52-5
Cyanoacetohydrazide, 98% 140-87-4
(1r,2s)-1-carboxy-1,2-dihydroxycyclohexa- 3,5-diene, 95% 100459-00-5
l(+)-Isoleucinol, 97% 24629-25-2
4-(Diethylamino)benzoic Acid, 99% 5429-28-7
5'-Tosyladenosine, 99+% 5135-30-8
3-Fluorobenzyl chloride, 96% 456-42-8
2-Chloro-4-Fluorobenzylalcohol
Normal-Butyronitrile, P.A. 109-74-0
Dicyclopentamethylenethiuram Disulfide 99+% 94-37-1
DL-2-Phenylpropionic Acid, 98% 492-37-5
n-Acetyl-5-hydroxytryptamine 17994-17-1
1-Ethylquinolinium Iodide 634-35-5
Tragacanth, Powder 9000-65-1
Perfluoro-compound FC-40 51142-49-5
2-Chloro-5-Nitroaniline, 99% 6283-25-6
2-Diphenylacetyl-1,3-Indandione-1-Hydrazone, 98% 5102-79-4
Naphthenic acids sodium salts (pract) 61790-13-4
p-Phenylenediamine dihydrochloride, 99+% 624-18-0
Thymolphthalein monophosphoric acid, disodium salt 28749-63-5
O-Cresolphtalein Complexone Sodium Salt 62698-54-8
Ytterbium(III) Chloride Hexahydrate, 99.999% 10035-01-5
2-Methyl-4-nitroaniline, 99% 99-52-5
2,4,6-Collidine, tech., 75% 108-75-8
Ethyl 2-chloropropionate, 97% 535-13-7
4-Cyanobenzaldehyde, 98% 105-07-7
2-Coumaranone, 97% 553-86-6
beta-Glycerophosphoric acid disodium salt, pentahydrate, 98% (Titr.) 819-83-0
2,2,2-Trichloroethyl chloroformate, 98% (titr.) 17341-93-4
DL-Alpha-Hydroxyisocaproic Acid, 99% 10303-64-7
(Ethanediylidenetetrathio)tetraacetic acid, 99% 10003-69-7
Cyclopentane, spectr. grade, 75% cyclopent ane, balance sat. c 5 287-92-3
2-Thiophenemethanol, 99+% 636-72-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net