**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 621-77-2 |Tripentylamine | 99 | 210-705-7 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: None Listed.
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Not available.
Potential Health Effects
Eye:
Causes eye burns. Low vapor concentrations may cause a temporary
visual disturbance known as 'blue haze' or 'halo vision'.
Skin:
Harmful if absorbed through the skin. Causes skin burns. Causes
symptoms similar to those of inhalation. Amines have been known to
cause skin irritation and sensitization.
Ingestion:
May cause severe irritation of the digestive tract. Ingestion may
cause headache, nausea, and vomiting.
Inhalation:
Causes respiratory tract irritation. May cause pulmonary edema and
severe respiratory disturbances. May cause central nervous system
effects such as nausea and headache.
Chronic:
Chronic exposure may cause effects similar to those of acute
exposure.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Use water spray to keep fire-exposed containers
cool. Combustible liquid and vapor. Approach fire from upwind to
avoid hazardous vapors and toxic decomposition products.
Extinguishing Media:
Water or foam may cause frothing. Use water spray, dry chemical,
carbon dioxide, or chemical foam.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Provide ventilation.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Do not get in eyes,
on skin, or on clothing. Keep container tightly closed. Keep away
from heat and flame. Do not breathe vapor or mist.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use process enclosure,
local exhaust ventilation, or other engineering controls to control
airborne levels. Use a corrosion-resistant ventilation system.
Exposure Limits
CAS# 621-77-2:
Personal Protective Equipment
Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Liquid
Color: clear, colorless to pale yellow
Odor: ammonia-like
pH: Not available.
Vapor Pressure: 0.03 mm Hg @ 20 deg C
Viscosity: Not available.
Boiling Point: 240 deg C @ 760 mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 91 deg C ( 195.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: slightly soluble in water
Specific Gravity/Density: 0.7907
Molecular Formula: C15H33N
Molecular Weight: 227.43
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures. Amines absorb carbon
dioxide from the air to form carbamate salts.
Conditions to Avoid:
Ignition sources, excess heat, Many amines are corrosive to copper,
copper alloys (e.g. brass), aluminum, zinc, zinc alloys, galvanized
surfaces..
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids, acid chlorides, acid
anhydrides.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, carbon dioxide.
Hazardous Polymerization: Will not occur.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 621-77-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Tripentylamine -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.*
Hazard Class: 8
UN Number: 2735
Packing Group: III
IMO
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing Group: III
RID/ADR
Shipping Name: AMINES, LIQUID, CORROSIVE, N.O.S.
Hazard Class: 8
UN Number: 2735
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 621-77-2: No information available.
Canada
CAS# 621-77-2 is listed on Canada's DSL List.
CAS# 621-77-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 621-77-2 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 9/30/1997 Revision #3 Date: 3/28/2005
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Piperonal, 99%
| 120-57-0 |
|
5-Chlorouracil, 99%
| 1820-81-1 |
|
Benzáa??anthracene-7,12-dione, 97% (uv-vis)
| 2498-66-0 |
|
(3,4-Dimethoxyphenyl)acetic acid, 99%
| 93-40-3 |
|
1-Naphthaleneacetamide, 98%
| 86-86-2 |
|
Chlorosulfonyl isocyanate, 98+%
| 1189-71-5 |
|
4-Chloro-4'-Fluorobutyrophenone, 97+% (GC)
| 3874-54-2 |
|
Vitamin d2 (calciferol),99% (hplc)
| 50-14-6 |
|
Diethyl Phosphonoacetaldehyde Diethyl Acetal, Tech. 90%
| 7598-61-0 |
|
3,5-Dimethoxyacetophenone, 97%
| 39151-19-4 |
|
Palladium on Activated Carbon (5% Pd)
| |
|
Cyclododecene, Tech., Predominantly Trans
| 1501-82-2 |
|
4-Hydroxy-6-methyl-2-pyrone
| 675-10-5 |
|
Benzoyl bromide, 97%
| 618-32-6 |
|
Prostaglandin e1, 98+%
| 745-65-3 |
|
4,4'-Dimethylbenzil, 99+%
| 3457-48-5 |
|
Chrysoidin
| 532-82-1 |
|
d-Limonene
| 5989-27-5 |
|
Mitomycin C (Contains 2mg Mitomycin C and 48mg Sodium Chloride)
| 50-07-7 |
|
Butyl methacrylate/isobutyl methacrylate copolymer, high molecular
| 9011-53-4 |
|
Bis-(2-Methylallyl)Cycloocta-1,5-Diene Ruthenium(II) Complex
| 0-00-1 |
|
d-Lysergic acid hydrate, 95% *** controled product kb 11.6.87 ***
| 82-58-6 |
|
2-Bromo-1-Indanol, 99%
| 5400-80-6 |
|
Ruthenium(IV) oxide hydrate
| 32740-79-7 |
|
2-Chlorocyclohexanol, Tech., 90%
| 1561-86-0 |
|
5-Amino-2,2,4-Trimethyl-1-Cyclopentane-Methylamine, 99%, Mixture of
| 67907-32-8 |
|
2,3,4-Trimethoxybenzoic acid, 98+%
| 573-11-5 |
|
1,3-Dibromo-5,5-dimethylhydantoin, 98%
| 77-48-5 |
|
Dicumarol, 99%
| 66-76-2 |
|
Tetraphenylphosphonium Chloride 99%
| 2001-45-8 |
|
Benzo[k]fluoranthene, 99+% (tlc)
| 207-08-9 |
|
Dihexylamine, 99+% (GC)
| 143-16-8 |
|
Propargyl Alcohol, 99%
| 107-19-7 |
|
Borane-tert-butylamine complex, powder
| 7337-45-3 |
|
Tri-n-butyltin methoxide, 97%
| 1067-52-3 |
|
5-Methoxyindole-3-Carboxaldehyde, 99+%
| 10601-19-1 |
|
2,4-Dichlorophenoxyacetic acid
| 94-75-7 |
|
4-Phenylpyridine, 99%
| 939-23-1 |
|
2-Naphthalenesulfonic acid hydrate, 99%
| 120-18-3 |
|
Benzanthrone, 99%
| 82-05-3 |
|
Tripentylamine, 99%
| 621-77-2 |
|
BOC-D-Arginine Hydrochloride, Hydrate, 99%
| 114622-81-0 |
|
Phenylphosphonothioic dichloride, 97%
| 3497-00-5 |
|
3,3,5,5-Tetramethylpyrroline-N-Oxide, 98%
| 10135-38-3 |
|
1-(2-Aminoethyl)-2-Methyl-5-Nitroimidazole Dihydrochloride
| 49575-10-2 |
|
Bis(2-ethylhexyl) adipate
| 103-23-1 |
|
M-Tolyl Acetate
| 122-46-3 |
|
1,4-Dioxa-8-azaspiro(4.5)decane, 98%
| 177-11-7 |
|
DL-Homocysteinethiolactone Hydrochloride, 99%
| 6038-19-3 |
|
Ethyl Benzoate, 99+%
| 93-89-0 |
|
|