Search   
MSDS 
:
 1,3-Dibromo-5,5-dimethylhydantoin, 98%
CAS 
:
 77-48-5
SYNONYMS 
:
 DDH, 1,3-Dibromo-5,5-dimethyl-2,4-imidazolidinedione; Dibromantin;     Dibromantine; N,N'-Dibromodimethylhydantoin; Hydantoin,     1,3-dibromo-5,5-dimethyl-; 2,4-Imidazolidinedione,     1,3-dibromo-5,5-dimethyl-.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 77-48-5 |1,3-Dibromo-5,5-dimethylhydantoin | 98.0 | 201-030-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XN
Risk Phrases: 22 36/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful if swallowed. Irritating to eyes and skin.Oxidizer.The
toxicological properties of this material have not been fully
investigated.Moisture sensitive.

Potential Health Effects
Eye:
Causes severe eye irritation.
Skin:
Causes severe skin irritation.
Ingestion:
Harmful if swallowed.
Inhalation:
Inhalation of dust may cause respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
with caution and in flooding amounts. Oxidizer. Greatly increases the
burning rate of combustible materials. Containers may explode in the
heat of a fire.
Extinguishing Media:
Use water only! Do NOT use carbon dioxide or dry chemical. Do NOT
use alcohol foams. Cool containers with flooding quantities of water
until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Avoid
generating dusty conditions. Provide ventilation. Do not get water
inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Keep container tightly closed. Avoid ingestion
and inhalation. Do not allow contact with water. Keep from contact
with moist air and steam.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances. Keep
refrigerated. (Store below 4C/39F.) Store protected from moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 77-48-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Powder
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 368-376 deg C
Freezing/Melting Point: 187-191 deg C
Autoignition Temperature: Not available.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: >190 deg C
Solubility in water: 0.32g/100cc
Specific Gravity/Density:
Molecular Formula: C5H6Br2N2O2
Molecular Weight: 285.91

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, moisture.
Incompatibilities with Other Materials:
Strong reducing agents, strong bases, moisture, easily oxidizable
materials.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide, hydrogen bromide,
bromine.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 77-48-5: MU0686000
LD50/LC50:
CAS# 77-48-5: Oral, rat: LD50 = 250 mg/kg.
Inhalation, rat: LCLo = 29g/m3/1h; Dermal, rabbit: LDLo = 20
Carcinogenicity:
1,3-Dibromo-5,5-dimethylhydantoin -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
R 36/38 Irritating to eyes and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 77-48-5: No information available.
Canada
CAS# 77-48-5 is listed on Canada's DSL List.
CAS# 77-48-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 77-48-5 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/09/1998 Revision #3 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Piperonal, 99% 120-57-0
5-Chlorouracil, 99% 1820-81-1
Benzáa??anthracene-7,12-dione, 97% (uv-vis) 2498-66-0
(3,4-Dimethoxyphenyl)acetic acid, 99% 93-40-3
1-Naphthaleneacetamide, 98% 86-86-2
Chlorosulfonyl isocyanate, 98+% 1189-71-5
4-Chloro-4'-Fluorobutyrophenone, 97+% (GC) 3874-54-2
Vitamin d2 (calciferol),99% (hplc) 50-14-6
Diethyl Phosphonoacetaldehyde Diethyl Acetal, Tech. 90% 7598-61-0
3,5-Dimethoxyacetophenone, 97% 39151-19-4
Palladium on Activated Carbon (5% Pd)
Cyclododecene, Tech., Predominantly Trans 1501-82-2
4-Hydroxy-6-methyl-2-pyrone 675-10-5
Benzoyl bromide, 97% 618-32-6
Prostaglandin e1, 98+% 745-65-3
4,4'-Dimethylbenzil, 99+% 3457-48-5
Chrysoidin 532-82-1
d-Limonene 5989-27-5
Mitomycin C (Contains 2mg Mitomycin C and 48mg Sodium Chloride) 50-07-7
Butyl methacrylate/isobutyl methacrylate copolymer, high molecular 9011-53-4
Bis-(2-Methylallyl)Cycloocta-1,5-Diene Ruthenium(II) Complex 0-00-1
d-Lysergic acid hydrate, 95% *** controled product kb 11.6.87 *** 82-58-6
2-Bromo-1-Indanol, 99% 5400-80-6
Ruthenium(IV) oxide hydrate 32740-79-7
2-Chlorocyclohexanol, Tech., 90% 1561-86-0
5-Amino-2,2,4-Trimethyl-1-Cyclopentane-Methylamine, 99%, Mixture of 67907-32-8
2,3,4-Trimethoxybenzoic acid, 98+% 573-11-5
1,3-Dibromo-5,5-dimethylhydantoin, 98% 77-48-5
Dicumarol, 99% 66-76-2
Tetraphenylphosphonium Chloride 99% 2001-45-8
Benzo[k]fluoranthene, 99+% (tlc) 207-08-9
Dihexylamine, 99+% (GC) 143-16-8
Propargyl Alcohol, 99% 107-19-7
Borane-tert-butylamine complex, powder 7337-45-3
Tri-n-butyltin methoxide, 97% 1067-52-3
5-Methoxyindole-3-Carboxaldehyde, 99+% 10601-19-1
2,4-Dichlorophenoxyacetic acid 94-75-7
4-Phenylpyridine, 99% 939-23-1
2-Naphthalenesulfonic acid hydrate, 99% 120-18-3
Benzanthrone, 99% 82-05-3
Tripentylamine, 99% 621-77-2
BOC-D-Arginine Hydrochloride, Hydrate, 99% 114622-81-0
Phenylphosphonothioic dichloride, 97% 3497-00-5
3,3,5,5-Tetramethylpyrroline-N-Oxide, 98% 10135-38-3
1-(2-Aminoethyl)-2-Methyl-5-Nitroimidazole Dihydrochloride 49575-10-2
Bis(2-ethylhexyl) adipate 103-23-1
M-Tolyl Acetate 122-46-3
1,4-Dioxa-8-azaspiro(4.5)decane, 98% 177-11-7
DL-Homocysteinethiolactone Hydrochloride, 99% 6038-19-3
Ethyl Benzoate, 99+% 93-89-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net