Search   
MSDS 
:
 Triisopropylsilane
CAS 
:
 6485-79-6
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 6485-79-6 |Triisopropylsilane | >95 | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 10 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Flammable. Irritating to eyes, respiratory system and skin.Moisture
sensitive.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and
diarrhea. The toxicological properties of this substance have not
been fully investigated.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical
aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Vapors can travel to a source of ignition and flash
back. Will burn if involved in a fire. Containers may explode in the
heat of a fire.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Remove all sources of ignition.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Ground and bond
containers when transferring material. Use spark-proof tools and
explosion proof equipment. Avoid breathing dust, vapor, mist, or
gas. Avoid contact with eyes, skin, and clothing. Keep away from
heat, sparks and flame.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container. Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low. Ventilation fans
and other electrical service must be non-sparking and have an
explosion-proof design.
Exposure Limits
CAS# 6485-79-6:
United Kingdom, WEL - TWA: (listed as silica, amorphous): 6 mg/m3
(inhalable dust); 2.4 mg/m3 TWA (respirable dust)
United Kingdom, WEL - STEL: (listed as silica, amorphous): 18 mg/
STEL (inhalable dust); 7.2 mg/m3 STEL (respirable dust)

Russia: (listed as silica, amorphous): 1 mg/m3 TWA

Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear a chemical apron.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear, colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 84 - 86 deg C @ 35 mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 37 deg C ( 98.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 0.770 g/ml
Molecular Formula: C9H22Si
Molecular Weight: 158.36

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Ignition sources, moisture.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, silicon dioxide.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 6485-79-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Triisopropylsilane -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.*
Hazard Class: 3
UN Number: 1993
Packing Group: III
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3.3
UN Number: 1993
Packing Group: III
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 10 Flammable.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 6485-79-6: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 6485-79-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 6485-79-6 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #3 Date: 9/27/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Tetrachlorocyclopropene, 98% (GC) 6262-42-6
Analgin DAB 68-89-3
Chelidonic Acid Monohydrate, 96% 6003-94-7
2-Chloro-4-Nitrotoluene, 99% 121-86-8
3-Methoxyphenyl isocyanate, 99% 18908-07-1
Cyclododecylmethyl ether, 98+% 2986-54-1
3-Bromofluorobenzene, 99% 1073-06-9
Gallium atomic absorption standard solution, 1mg/ml Ga in 2% HNO3 7440-55-3
Triacetylmethane, 97% 815-68-9
(4-Pyridylthio)Acetic Acid , 98% 10351-19-6
2-Methyl-1-Nitronaphthalene, 99% 881-03-8
Adogen 464 63393-96-4
Trichloroacetonitrile, 95% (gc) 545-06-2
Methyl orotate, 99% 6153-44-2
5-Amino-6-nitroquinoline, 98% 35975-00-9
Ammonium Sulfobetaine - 4, 1 % Solution in Water
3-Fluoro-p-anisaldehyde, 99% 351-54-2
3,5-Dibenzyloxyacetophenone, 98% 28924-21-2
Triisopropylsilane 6485-79-6
Ethyl Cis-2-Hydroxy-1-Cyclopentanecarboxylate, 98% 2315-21-1
Acetol, tech., ca 90-95% (gc) 116-09-6
Bathocuproinedisulfonic acid,disodium salt hydrate, 97% (hplc) 52698-84-7
Glycerol-1-Allylether, 98% 123-34-2
Dimethylamine Hydrochloride, 99% (Dry Substance) 506-59-2
Sodium tetrathionate, 90% (titr.) 10101-86-7
1,4-Diiodobenzene, 98% 624-38-4
Dibromomaleic Acid 608-37-7
1(and 2)-Octene, 99% (GC) 62758-15-0
3-Isobutoxy-2-cyclohexen-1-one, 99% 23074-59-1
2,4,5-Tribromoimidazole, 97% 2034-22-2
6-Nitrobenzimidazole, 98% 94-52-0
Acid blue 120 3529-01-9
2,6-Dimethylquinoline, 98% 877-43-0
3-Diethylamino-1-propanol, 94% (titr.) 622-93-5
FMOC-Beta-Alanine, 98% 35737-10-1
2-Chlorocyclopentanone, 97% (Stabilzed with 200 ppm H.Q.) 694-28-0
2-Azacyclononanone 99% 935-30-8
Diethylamine Hydrochloride, 99% 660-68-4
Tetrabutylammonium Nitrate 1941-27-1
2,4-Di-Tert-Pentylphenol, 96% (GC) 120-95-6
1-Diazo-2-naphthol-4-sulfonic acid,97%(TLC, contains ca. 25% 887-76-3
tert-Butylurea 1118-12-3
5-Acetoxymethyl-2-furaldehyde 10551-58-3
Iodoethane-d5, 99+ atom% d 6485-58-1
Dimethyldithiocarbamic Acid Sodium Salt 128-04-1
Naphthol yellow s 846-70-8
Molecular Sieves, 13X, Powder (< 0.050 mm) 0-00-1
1,2-Octanediol, 98+% 1117-86-8
Tetrahexylammonium Benzoate 16436-29-6
4-Bromophenylhydrazine Hydrochloride, 99% 622-88-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net