Search   
MSDS 
:
 Diethylamine Hydrochloride, 99%
CAS 
:
 660-68-4
SYNONYMS 
:
 None.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 660-68-4 |Diethylamine Hydrochloride | 99 | 211-541-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Hygroscopic (absorbs
moisture from the air).

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Causes gastrointestinal tract irritation.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid immediately. Flush skin with plenty of water for at
least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or
alcohol-resistant foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Sweep up, then place into a suitable container for
disposal. Avoid generating dusty conditions. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Avoid contact with eyes, skin, and clothing. Keep
container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate general or
local exhaust ventilation to keep airborne concentrations below the
permissible exposure limits.
Exposure Limits
CAS# 660-68-4:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149
approved full-facepiece airline respirator in the
positive pressure mode with emergency escape
provisions. Follow the OSHA respirator regulations
found in 29 CFR 1910.134 or European Standard EN 149.
Use a NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: off-white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 320.0 - 330.0 deg C @ 760.00m
Freezing/Melting Point: 227.00 - 230.00 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: practically insoluble in ether
Specific Gravity/Density:
Molecular Formula: C4H11N.HCl
Molecular Weight: 109.60

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, nitrogen oxides, carbon monoxide, irritating and
toxic fumes and gases, carbon dioxide, nitrogen.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 660-68-4: IA3084000
LD50/LC50:
CAS# 660-68-4: Oral, mouse: LD50 = 4860 mg/kg; Oral, rat: LD50 =
9900 mg/kg.
Carcinogenicity:
Diethylamine Hydrochloride -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 7 Keep container tightly closed.
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 660-68-4: 1
Canada
CAS# 660-68-4 is listed on Canada's DSL List.
CAS# 660-68-4 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 660-68-4 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/21/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Tetrachlorocyclopropene, 98% (GC) 6262-42-6
Analgin DAB 68-89-3
Chelidonic Acid Monohydrate, 96% 6003-94-7
2-Chloro-4-Nitrotoluene, 99% 121-86-8
3-Methoxyphenyl isocyanate, 99% 18908-07-1
Cyclododecylmethyl ether, 98+% 2986-54-1
3-Bromofluorobenzene, 99% 1073-06-9
Gallium atomic absorption standard solution, 1mg/ml Ga in 2% HNO3 7440-55-3
Triacetylmethane, 97% 815-68-9
(4-Pyridylthio)Acetic Acid , 98% 10351-19-6
2-Methyl-1-Nitronaphthalene, 99% 881-03-8
Adogen 464 63393-96-4
Trichloroacetonitrile, 95% (gc) 545-06-2
Methyl orotate, 99% 6153-44-2
5-Amino-6-nitroquinoline, 98% 35975-00-9
Ammonium Sulfobetaine - 4, 1 % Solution in Water
3-Fluoro-p-anisaldehyde, 99% 351-54-2
3,5-Dibenzyloxyacetophenone, 98% 28924-21-2
Triisopropylsilane 6485-79-6
Ethyl Cis-2-Hydroxy-1-Cyclopentanecarboxylate, 98% 2315-21-1
Acetol, tech., ca 90-95% (gc) 116-09-6
Bathocuproinedisulfonic acid,disodium salt hydrate, 97% (hplc) 52698-84-7
Glycerol-1-Allylether, 98% 123-34-2
Dimethylamine Hydrochloride, 99% (Dry Substance) 506-59-2
Sodium tetrathionate, 90% (titr.) 10101-86-7
1,4-Diiodobenzene, 98% 624-38-4
Dibromomaleic Acid 608-37-7
1(and 2)-Octene, 99% (GC) 62758-15-0
3-Isobutoxy-2-cyclohexen-1-one, 99% 23074-59-1
2,4,5-Tribromoimidazole, 97% 2034-22-2
6-Nitrobenzimidazole, 98% 94-52-0
Acid blue 120 3529-01-9
2,6-Dimethylquinoline, 98% 877-43-0
3-Diethylamino-1-propanol, 94% (titr.) 622-93-5
FMOC-Beta-Alanine, 98% 35737-10-1
2-Chlorocyclopentanone, 97% (Stabilzed with 200 ppm H.Q.) 694-28-0
2-Azacyclononanone 99% 935-30-8
Diethylamine Hydrochloride, 99% 660-68-4
Tetrabutylammonium Nitrate 1941-27-1
2,4-Di-Tert-Pentylphenol, 96% (GC) 120-95-6
1-Diazo-2-naphthol-4-sulfonic acid,97%(TLC, contains ca. 25% 887-76-3
tert-Butylurea 1118-12-3
5-Acetoxymethyl-2-furaldehyde 10551-58-3
Iodoethane-d5, 99+ atom% d 6485-58-1
Dimethyldithiocarbamic Acid Sodium Salt 128-04-1
Naphthol yellow s 846-70-8
Molecular Sieves, 13X, Powder (< 0.050 mm) 0-00-1
1,2-Octanediol, 98+% 1117-86-8
Tetrahexylammonium Benzoate 16436-29-6
4-Bromophenylhydrazine Hydrochloride, 99% 622-88-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net