Search   
MSDS 
:
 Norit SA II
CAS 
:
 7440-44-0
SYNONYMS 
:
 Snythetic Graphite; Acetylene Black; Black Pearls.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7440-44-0 |CARBON | 100 | 231-153-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Not available.

Potential Health Effects
Eye:
Dust may cause mechanical irritation. Causes eye irritation. May
cause conjunctivitis.
Skin:
May cause skin irritation. Dust causes mechanical irritation.
Ingestion:
Ingestion of large amounts may cause gastrointestinal irritation.
Inhalation:
Dust is irritating to the respiratory tract. May cause lung damage.
Chronic:
Chronic inhalation may lead to decreased pulmonary function.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists. Wash clothing before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Use water spray to keep fire-exposed containers
cool. Dust can be an explosion hazard when exposed to heat or flame.
Flammable solid. Can be easily ignited and burns vigorously.
Containers may explode if exposed to fire.
Extinguishing Media:
For large fires, use water spray, fog or alcohol-resistant foam. For
small fires, use dry chemical, carbon dioxide, sand, earth, water
spray or regular foam. Cool containers with flooding quantities of
water until well after fire is out.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid generating dusty conditions. Remove all sources of
ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with eyes,
skin, and clothing. Empty containers retain product residue, (liquid
and/or vapor), and can be dangerous. Avoid ingestion and inhalation.
Do not pressurize, cut, weld, braze, solder, drill, grind, or expose
empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of
ignition. Store in a cool, dry place. Store in a tightly closed
container. Keep from contact with oxidizing materials. Store in a
cool, dry, well-ventilated area away from incompatible substances.
Flammables-area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7440-44-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize
contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid
Color: black
Odor: Odorless.
pH: Not available.
Vapor Pressure: 1 mm Hg @ 3586C
Viscosity: Not available.
Boiling Point: Sublimes @ 3652C
Freezing/Melting Point: 3652 deg C
Autoignition Temperature: 230 deg C ( 446.00 deg F)
Flash Point: Not applicable.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature: Not available.
Solubility in water: insoluble
Specific Gravity/Density: 1.8-2.1
Molecular Formula: C
Molecular Weight: 12

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, dust generation, moisture,
excess heat.
Incompatibilities with Other Materials:
May react vigorously or violently when mixed with strong oxidizing
agents such as chlorates, bromates and nitrates, expecially when
heated. Incompatible with chlorinated paraffins, Lead oxide,
manganese oxide, iron oxide, liquid oxygen, oils, and moisture.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 7440-44-0: FF5250100
LD50/LC50:
Not available.
Carcinogenicity:
CARBON -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 7440-44-0: 0
Canada
CAS# 7440-44-0 is listed on Canada's DSL List.
CAS# 7440-44-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7440-44-0 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 3/26/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
(S)-(+)-6,6'-Dibromo-1,1'-Bi-2-Naphthol, 99% 80655-81-8
1,10-Decanediol, 96% 112-47-0
1,10-Decanediol, 99% 112-47-0
Norit SA II 7440-44-0
(R)-(-)-6,6'-Dibromo-1,1'-Bi-2-Naphthol, 99% 65283-60-5
N-((2S, 3R)-3-Amino-2-hydroxy-4-phenylbutyryl)-L-leucine, 95% 0-01-1
3-(2-Naphthyl)-L-Alanine, 98% 0-01-1
(2R)-2-[(4-Ethyl-2,3-dioxopiperazinyl)carbonylamino]-2-phenylacetic 63422-71-9
Adenosine 5'-Triphosphate Disodium Salt Trihydrate 51963-61-2
N,N-Dichlorourethane, 98% 13698-16-3
cis-Decahydronaphthalene-d18, 99.5 atom % D, 97% cis, 3% trans 91-17-8
Adipic acid 124-04-9
4,6-Diaminoresorcinol dihydrochloride, 98% 15791-87-4
1,3-Diiminoisoindoline, 97% 57500-34-2
Carbon Disulfide, P.A., Low in Benzene Content 75-15-0
2-[(4S)-2,2-Dimethyl-5-Oxo-1,3-Dioxolan-4-yl]Acetic Acid 73991-95-4
Carnauba wax (flakes) 8015-86-9
Castor Oil 8001-79-4
Pyrocatechol, 98% (Titr.) 120-80-9
OPD tablets, 2 mg/tablet 95-54-5
Ammonium cerium(IV) sulfate dihydrate 7637-03-8
(+/-)-Bay K 8644, 98% 71145-03-4
4-Nitrophenyl Bromoacetate, 98% 19199-82-7
Tetraethyl Ethylenediphosphonate, 97% 995-32-4
Cesium Chloride, 99.999% 7647-17-8
Boc-L-Isoleucine, 99+% 13139-16-7
Aerosol OT Solid 577-11-7
Bismuth(III) chloride, anhydrous, 98+% 7787-60-2
Glutaric Dialdehyde, 24 wt. % Solution in Water 111-30-8
Chlorobenzene, 99+%, Spectrophotometric Grade 108-90-7
4-(Aminomethyl)-Piperidine, 97% 7144-05-0
2-Chloromethylbenzimidazole 4857-04-9
Cinnamyl Bromide, predominantly trans. 4392-24-9
1,3-Diamino-2-Hydroxypropane 616-29-5
2,5-DICHLOROPHENOL 583-78-8
8-Bromoadenosine, 98% 2946-39-6
1-Phenyl-1,2-Ethanediol, 97% 93-56-1
2,6-Dimethoxybenzoyl Chloride 1989-53-3
2-Amino-5-Methylbezoic Acid, 97% 2941-78-8
Diethyl(Chloromethyl)Phosphonate 3167-63-3
Diethyl(Phenylthiomethyl)Phosphonate 38066-16-9
Trimethyl 4-Phosphonocrotonate 86120-40-3
9H-Fluorene-9-Acetic Acid 6284-80-6
5-Amino-2-Nitrobenzoic Acid, 97% 132080-60-5
4-Bromoindole 52488-36-5
Diethyl(aminomethyl)phosphonate oxalate, 95% 117196-73-3
Diethyl(aminoethyl)phosphonate oxalate 203192-98-7
Diethyl(aminopropyl)phosphonate oxalate 0-01-1
Diethyl(aminobutyl)phosphonate oxalate 0-01-1
Diethyl(4-Chlorobenzyl)Phosphonate 39225-17-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net