**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****
+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 7784-23-8 |Aluminum Iodide | 99.999 | 232-054-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34
**** SECTION 3 - HAZARDS IDENTIFICATION ****
EMERGENCY OVERVIEW
Causes burns.Light sensitive.Air sensitive.Water-reactive.
Potential Health Effects
Eye:
May cause eye irritation and possible burns.
Skin:
May cause severe skin irritation with possible burns, especially if
skin is wet or moist.
Ingestion:
May cause severe gastrointestinal tract irritation with nausea,
vomiting and possible burns.
Inhalation:
May cause severe respiratory tract irritation and possible burns.
Chronic:
Not available.
**** SECTION 4 - FIRST AID MEASURES ****
Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Never give anything by mouth to an
unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
**** SECTION 5 - FIRE FIGHTING MEASURES ****
General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. Reacts violently with water.
Extinguishing Media:
Use agent most appropriate to extinguish fire.
**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****
General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Do not get water inside
containers.
**** SECTION 7 - HANDLING and STORAGE ****
Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use only in a well-ventilated area. Do not get in
eyes, on skin, or on clothing. Do not ingest or inhale. Store
protected from light. Store protected from air. Do not allow contact
with water.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Store protected from light and air.
**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 7784-23-8:
United Kingdom, WEL - TWA: (listed as aluminum, soluble salts): 2
mg/m3 TWA
United Kingdom, WEL - STEL: (listed as aluminum, soluble salts):
mg/m3 STEL
Belgium - TWA: (listed as aluminum, soluble salts): 2 mg/m3 VLE (
Al)
France - VME: (listed as aluminum, soluble salts): 2 mg/m3 VME
Germany: (listed as aluminum, soluble salts): 2 mg/m3 VME
Malaysia: (listed as aluminum, soluble salts): 2 mg/m3 TWA (as Al
Spain: (listed as aluminum, soluble salts): 2 mg/m3 VLA-ED (as Al
Personal Protective Equipment
Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.
**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****
Physical State: Lumps
Color: yellowish-black brown
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 360 deg C
Freezing/Melting Point: 191 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 3.980
Molecular Formula: AlI3
Molecular Weight: 407.70
**** SECTION 10 - STABILITY AND REACTIVITY ****
Chemical Stability:
Stable under normal temperatures and pressures. Combines vigorously
with water with the evolution of heat.
Conditions to Avoid:
Light, exposure to air, exposure to moist air or water.
Incompatibilities with Other Materials:
Water.
Hazardous Decomposition Products:
Hydrogen iodide, aluminum oxide.
Hazardous Polymerization: Not available.
**** SECTION 11 - TOXICOLOGICAL INFORMATION ****
RTECS#:
CAS# 7784-23-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Aluminum Iodide -
Not listed by ACGIH, IARC, or NTP.
**** SECTION 12 - ECOLOGICAL INFORMATION ****
**** SECTION 13 - DISPOSAL CONSIDERATIONS ****
Dispose of in a manner consistent with federal, state, and local regulations.
**** SECTION 14 - TRANSPORT INFORMATION ****
IATA
Shipping Name: CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3260
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3260
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3260
Packing group: III
**** SECTION 15 - REGULATORY INFORMATION ****
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7784-23-8: No information available.
Canada
CAS# 7784-23-8 is listed on Canada's DSL List.
CAS# 7784-23-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7784-23-8 is listed on the TSCA inventory.
**** SECTION 16 - ADDITIONAL INFORMATION ****
MSDS Creation Date: 12/23/1997 Revision #2 Date: 3/18/2003
The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
|
|
|
| ALL MSDS PAGES IN THIS GROUP
| | NAME | CAS |
|
Selenium sulfide
| 7488-56-4 |
|
Cacodylic acid, 98%
| 75-60-5 |
|
Zinc Chloride, 99.99%
| 7646-85-7 |
|
Phosphorus, Lump, Red, 99.999%
| 7723-14-0 |
|
Lead (II) Fluoride, Powder, ca. 5 Micron, 99+%
| 7783-46-2 |
|
Ammonium Iron (II) Sulfate Hexahydrate, 99.997%
| 7783-85-9 |
|
Aluminum iodide, 95%, tech.
| 7784-23-8 |
|
Aluminum Iodide, Anhydrous, 99.999%
| 7784-23-8 |
|
Ursolic Acid,95%
| 77-52-1 |
|
Arsenic(iii)bromide, 99.9%
| 7784-33-0 |
|
Arsenic(III) iodide
| 7784-45-4 |
|
Bismuth(III) chloride, 99.999%
| 7787-60-2 |
|
Thallium (I) Bromide, 99.999%
| 7789-40-4 |
|
Antimony(iii)bromide, 99.99%
| 7789-61-9 |
|
Poly(acenaphthylene)
| 25036-01-5 |
|
Antimony Tribromide, 99%
| 7789-61-9 |
|
Calcium iodate, 98%
| 7789-80-2 |
|
Rubidium Iodide, 99.9%
| 7790-29-6 |
|
Manganese(II) Iodide, 99%
| 7790-33-2 |
|
Antimony Triiodide, 98%
| 7790-44-5 |
|
Calcium tungstate(VI)
| 7790-75-2 |
|
Calcium Pyrophosphate
| 7790-76-3 |
|
Thallium (I) Chloride, 99.999%
| 7791-12-0 |
|
Selenium (IV) Oxychloride, 97%
| 7791-23-3 |
|
Cobalt(II) Bromide Hydrate
| 85017-77-2 |
|
Dichlorophenylborane, 97%
| 873-51-8 |
|
alpha-Fluorophenylacetic acid, 99+%
| 1578-63-8 |
|
Trichloroethylgermane, 97%
| 993-42-0 |
|
Rac-Ethylenebis(Indenyl) Zirconium (IV) dichloride
| 100080-82-8 |
|
Aflatoxin b1, crystalline
| 1161-94-0 |
|
Iridium(III) Chloride
| 10025-83-9 |
|
Cyclooctatetraene Iron Tricarbonyl, 98%
| 12093-05-9 |
|
(cis, cis-1,5-cyclooctadiene)palladium(ii) chloride, 99%
| 12107-56-1 |
|
Vinylbenzyl Trimethylammonium Chloride (60:40 Para:Meta Mixture)
| 26616-35-3 |
|
Sodium Hexachloroosmate (IV) Hydrate
| 1307-81-9 |
|
Rhenium (VII) Oxide, 99.99%
| 1314-68-7 |
|
Gold (III) Chloride, 99%
| 13453-07-1 |
|
5,10,15,20-Tetraphenyl-21H,23H-porphine zinc, synthetic, 95%
| 14074-80-7 |
|
5,10,15,20-Tetraphenyl-21h,23h-porphine ni ckel(ii), synthetic
| 14172-92-0 |
|
Dirhenium Decacarbonyl, 98%
| 14285-68-8 |
|
5,10,15,20-Tetraphenyl-21h,23h-porphine va nadium(iv)oxide
| 14705-63-6 |
|
Sodium Hexachlororhodate (III) Hydrate
| 14972-70-4 |
|
Osmium (III) Chloride Hydrate
| 14996-60-2 |
|
Triosmium Dodecacarbonyl, 98%
| 15696-40-9 |
|
5,10,15,20-Tetraphenyl-21h,23h-porphine iron(iii)chloride, synthetic
| 16456-81-8 |
|
Potassium Hexacyanoplatinate (IV)
| 16920-94-8 |
|
(2S,5S)-(+)-Hexanediol, 99% (99% E.E.)
| 34338-96-0 |
|
Tris(dibenzylideneacetone)dipalladium(0)
| 51364-51-3 |
|
Potassium Tetracyanoplatinate (II)
| 562-76-5 |
|
5,10,15,20-Tetrakis(4-(trimethylammonio)-p henyl)-21h,23h-porphine
| 69458-20-4 |
|
|