Search   
MSDS 
:
 4-(Trifluoromethoxy)benzenesulfonyl chloride, 98%
CAS 
:
 94108-56-2
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 94108-56-2 |4-(Trilfuoromethoxy)benzenesulfonyl ch| 98% | 302-397-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Chronic exposure may cause effects similar to those of acute
exposure.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Runoff from
fire control or dilution water may cause pollution.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER!

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation. Do not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Keep container tightly closed. Do not ingest or
inhale. Use only in a chemical fume hood. Discard contaminated shoes.
Keep from contact with moist air and steam.
Storage:
Keep container closed when not in use. Store protected from
moisture.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 94108-56-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 120-122 deg C @ 15mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 230 deg F (> 110.00 deg C)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.536
Molecular Formula: C7H4ClF3O3S
Molecular Weight: 260.62

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Moisture sensitive.
Conditions to Avoid:
Moisture.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, carbon dioxide, hydrogen fluoride
gas, sulfur oxides (SOx), including sulfur oxide and sulfur dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 94108-56-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-(Trilfuoromethoxy)benzenesulfonyl chloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Pseudomonas putida:

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3265
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 94108-56-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 94108-56-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 94108-56-2 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 11/09/1996 Revision #5 Date: 2/17/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2,3,6-Trifluorobenzoyl chloride, 98%
2,2,2-Trifluoroethyl methacrylate, 99%, stabilized with 50 ppm MEHQ 352-87-4
3-Bromo-4-fluorotoluene, 99% 452-62-0
4-(Trifluoromethoxy)benzamidoxime, 97% 56935-71-8
4-(Trifluoromethoxy)benzenesulfonyl chloride, 98% 94108-56-2
2-(Trifluoromethyl)benzophenone, 98% 727-99-1
3-(Trifluoromethyl)benzophenone, 99% 728-81-4
2-(Trifluoromethyl)benzoyl chloride, 98% 312-94-7
2-Cyclohexyl-1-Propanol, 99% 5442-00-2
2-(Trifluoromethyl)benzylamine, 98% 3048-01-9
alpha'-Bromo-alpha,alpha,alpha-trifluoro-o-xylene, 98% 395-44-8
alpha'-Bromo-alpha,alpha,alpha-trifluoro-m -xylene, 98% 402-23-3
alpha'-Bromo-alpha,alpha,alpha-trifluoro-p-xylene, 98% 402-49-3
alpha'-Chloro-alpha,alpha,alpha-trifluoro-o-xylene, 97% 21742-00-7
alpha'-Chloro-alpha,alpha,alpha-trifluoro-p-xylene, 98% 939-99-1
2-(Trifluoromethyl)cinnamic acid, 99% 2062-25-1
4-(Trifluoromethyl)Mandelic Acid, 98% 395-35-7
4-(Trifluoromethyl)phenylacetonitrile, 98% 2338-75-2
3-(Trifluoromethyl)Phenylhydrazine, 97% 368-78-5
2-(Trifluoromethyl)acrylic acid, 98% 381-98-6
4-Ethoxybenzyl-triphenylphosphonium bromide, 98% 82105-88-2
2,3,5-Trifluorophenol, 98% 2268-15-7
2,3,6-Trifluorophenol, 98% 113798-74-6
Tris(pentafluorophenyl)phosphine, 97% 1259-35-4
Vanadium(v)oxytrifluoride, 99% 13709-31-4
Vinyl trifluoroacetate, 98% 433-28-3
Trifluoromethanesulfonyl chloride, 99+% 421-83-0
2,3,4,6-Tetrafluoronitrobenzene, 97+% 314-41-0
3-(Trifluoromethyl)benzylamine, 98% 2740-83-2
Trans-p-(trifluoromethyl)cinnamic acid, 98 % 16642-92-5
(alpha,alpha,alpha-Trifluoro-m-tolyl)acetic acid, 98% 351-35-9
1,5-Diaminonaphthalene, 97% 2243-62-1
(alpha,alpha,alpha-Trifluoro-p-tolyl)acetic acid, 98% 32857-62-8
Alpha,Alpha,Alpha-Trifluoro-Meta-Tolyl Isocyanate, 97% 329-01-1
1,3,5-Trifluoro-2-nitrobenzene, 98% 315-14-0
Erbium (III) Oxide, 99.9% 12061-16-4
Gadolinium (III) Oxide, 99.9% 12064-62-9
Cyclopentadienylmanganese Tricarbonyl 12079-65-1
Tris(2-(Diphenylphosphino)ethyl)Phosphine, 97% 23582-03-8
Barium 2-ethylhexanoate, 30% in xylene 1330-20-7
Triethyltin Bromide, 97% 2767-54-6
Niobium(V)Ethoxide, 99.95% 3236-82-6
Scandium(III)Acetate Hydrate, 99.9% 3804-23-7
Neodymium(III)Carbonate Hydrate, 99.9% 38245-38-4
3,5-Dichloro-4-Hydroxybenzoic Acid, 97% 3336-41-2
4-Nitro-3-(trifluoromethyl)phenol, 99% 88-30-2
3,4,5-Trichlorobenzotrifluoride, 97% 50594-82-6
alpha-Methyl-3-(trifluoromethyl)benzyl alcohol, 96% 454-91-1
1,4,8,11-Tetramethyl-1,4,8,11-Tetraaza-Cyclotetradecane, 98% 41203-22-9
Triruthenium dodecacarbonyl, 99% 15243-33-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net