3M GENERAL OFFICES -- SCOTCHPLY SP-114 REINFORCED PLASTIC
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BXSNX
MSDS NAME: SCOTCHPLY SP-114 REINFORCED PLASTIC
Responsible Party
Name: 3M GENERAL OFFICES
Address: 3M CENTER
City: ST PAUL MN 55144-1000
Info Phone: 612-733-1110
Emergency Phone Number: 612-733-1110
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: MINNESOTA MINING AND MFG CO, DBA 3M
Address: 3M CENTER BLDG 224-5S-04
City: SAINT PAUL MN 55144-1000
Phone: 866-556 5712 / 612-733-1110
Name: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Address: 3M CTR
City: SAINT PAUL MN 55144-1000
Phone: 612-737-4114
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE:EYE:DIRECT CONT W/UNCURED MATL MAY CAUSE IRRIT. DUST
FROM CUTTING, GRINDING/SANDING OF CURED MATL MAY CAUSE IRRIT.
SKIN:RPTD/PRLNGD CONT W/UNCURED MATL MAY CAUSE IRRIT. MAY CAUSE AN ALLERGIC
REA CTION IN CERTAIN INDIVIDUALS. INHAL:VAPS CREATED DURING CURING/HEATING
MAY IRRITATE RESP TRACT. DUST (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ:FROM CUTTING, GRINDING/SANDING OF
CURED MATL MAY CAUSE RESP SYS IRRIT. INGEST:ACUTE ORAL TOXICITY CONSIDERED
LOW. MAY CAUSE DIGESTIVE SYSTEM IRRITATION.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYE:IMMED FLUSH W/PLENTY OF WATER FOR @ LEAST 15 MINS & CALL
PHYS. SKIN:THORO WASH W/SOAP & WATER. CALL PHYS IF IRRIT PERSISTS.
INHAL:PROVIDE FRESH AIR IF SYMPS OCCUR. CALL PHYS IF SYMPS CONTINUE. ING
EST:UNLIKELY. HOWEVER, IF INGESTED, CALL PHYS OR POISON CONTROL CENTER.
=======================================================
Handling and Disposal
=======================================================
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE OF CURED & UNCURED WASTE MATL IN SANITARY
LANDFILL/INCIN IN INDUST/COMMERCIAL FACILITY. SINCE REGS VARY, CONSULT
FEDERAL, STATE AND LOCAL AUTH BEFORE DISP.
Handling And Storage Precautions: FOR INDUST/PROFESSIONAL USE ONLY. AVOID BRTHG
VAPS DURING HEAT CURING. USE ONLY W/SUFFICIENT VENT TO REMOVE VAPS & PVNT
VAPOR BUILDUP.
Other Precautions: CURING EQUIP SHOULD BE VENTED PROPERLY TO OUTDOORS/SUITABLE
EMISSION CONTROL DEVICE. AVOID CONT W/EYES & SKIN. AVOID EYE CONT W/OR
BRTHG DUST FROM CUTTING, GRINDING, & SANDING OPERATIONS ON CURED MATL .
USE WATER AS LUBRICANT ON (SUPDAT)
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: CO*2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH/MSHA APPROVED DUST MASK.
Ventilation: NONE SPECIFIED BY MANUFACTURER.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPRVD EMERGENCY EYE WASH & DELUGE SHOWER (FP
N).
Work Hygienic Practices: REMOVE CONTAMD CLTHG & LAUNDER BEFORE REUSE.
Supplemental Safety and Health: CNDTNS TO AVOID:(DO NOT OPEN PROT CNTNR PRIOR
TO PROD REACHING AMBIENT CNDTNS.) OTHER PRECAUT:MACHINING TOOLS TO ELIM DUST
& IMPROVE MACHINABILITY OF CURED PARTS. KEEP OUT OF REACH OF CHILDREN.
=======================================================
Physical/Chemical Properties
=======================================================
Appearance and Odor: TAPE, TRANSLUCENT, NO ODOR.
Percent Volatiles by Volume: 0(WT)
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: STORE @ TEMPS OF 40F/BELOW TO MAINTAIN MATL'S
SHELF LIFE. ALLOW PROD TO THORO WARM TO ROOM TEMP PRIOR TO USE. (SUPDAT)
Materials To Avoid: NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products: THERMAL DECOMPOSITION PRODUCTS MAY INCLUDE
CO, CO*2.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SCOTCHPLY SP-114 REINFORCED PLASTIC
Company: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Street: 3M CTR
City: SAINT PAUL MN
Zipcode: 55144-1000
Health Emergency Phone: 612-733-1110
Label Required IND: Y
Date Of Label Review: 05/08/1995
Status Code: C
Label Date: 05/08/1995
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE:EYE:DIRECT CONT W/UNCURED MATL MAY CAUSE IRRIT.
DUST FROM CUTTING, GRINDING/SANDING OF CURED MATL MAY CAUSE IRRIT.
SKIN:RPTD/PRLNGD CONT W/UNCURED MATL MAY CAUSE IRRIT. MAY CAUSE AN ALLERGIC
REA CTION IN CERTAIN INDIVIDUALS. INHAL:VAPS CREATED DURING CURING/HEATING
MAY IRRITATE RESP TRACT. DUST MAY CAUSE IRRITATION. INGEST:MAY CAUSE
IRRITATION. CHRONIC:NONE SPECIFIED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.