DOW CORNING CORP -- SILICONE PLUS PREMIUM 100% SIL BTHTB SLNT, K/
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BYWPQ
MSDS NAME: SILICONE PLUS PREMIUM 100% SIL BTHTB SLNT, K/B
Responsible Party
Name: DOW CORNING CORP
Address: SOUTH SAGINAW ROAD
City: MIDLAND MI 48686
Info Phone: 517-496-6000
Emergency Phone Number: 517-496-5900
Preparer's Name: JACK L SHENEBERGER
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: DOW CORNING CORP
Address: 3901 S SAGINAW RD
Box: 997
City: MIDLAND MI 48686-0997
Phone: 517-496-6000/517-496-6315
Name: DOW CORNING CORP
Address: 2200 W SALZBURG RD
City: AUBURN MI 48611
Phone: 517-496-4388
=======================================================
Ingredients
=======================================================
Cas: 471-34-1
RTECS #: FF9335000
Name: CARBONIC ACID, CALCIUM SALT (1:1); (CALCIUM CARBONATE)
% Wt: 44
OSHA PEL: 5 MG/M3 TDUST (MFR)
ACGIH TLV: 10 MG/M3 TDUST (MFR)
------------------------------
Cas: 9016-45-9
RTECS #: MD0900000
Name: GLYCOLS, POLYETHYLENE, MONO (NONYLPHENYL) ETHER; (NONOXYNOL-9)
% Wt: 1
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 109-89-7
RTECS #: HZ8750000
Name: DIETHYLAMINE (CERCLA)
% Wt: 0.2
OSHA PEL: 25 PPM
ACGIH TLV: 5 PPM/15 STEL
EPA Rpt Qty: 1000 LBS
DOT Rpt Qty: 1000 LBS
------------------------------
Cas: 27176-87-0
RTECS #: DB6600000
Name: BENZENE SULFONIC ACID, DODECYL-; (DODECYLBENZENESULFONIC ACID) (CERCLA)
% Wt: 0.4
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
EPA Rpt Qty: 1000 LBS
DOT Rpt Qty: 1000 LBS
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYES:DIRECT CONTACT IRRITATES SLIGHTLY TO MODERATELY WITH
REDNESS AND SWELLING. SKIN:SINGLE RELATIVELY SHORT EXPOSURE (<24 HRS)
IRRITATES. REPEATED, PROLONGED CONTACT (24-48 HRS) IRRITS SERIOUSLY, MAY
BURN MILDLY. RPTD CONT MAY CAUSE ALLERGIC SENSIT. INHAL:IRRITS RESP PASSAGES
& EYES VERY SLIGHTLY. (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZS:INGEST:SM AMTS TRANSFERRED TO
MOUTH BY FINGERS DURING USE, ETC., SHOULD NOT INJURE. LG AMTS MAY INJURE
SLIGHTLY. COMMENTS:ING 3 IS KNOWN SKIN SENSIT. THESE LISTED POTNTL EFTS OF
OVEREXP ARE BASED ON ACTUAL DATA, RSLTS OF STUDIES PERFORMED UPON SIMILAR
COMPOSITIONS, COMPONENT DATA &/OR EXPERT REVIEW OF PROD.
Medical Cond Aggravated By Exposure: OVEREXPOSURE TO ANY CHEMICAL MAY RESULT IN
ENHANCEMENT OF PRE-EXISTING ADVERSE MEDICAL CONDITIONS AND ALLERGIC
REACTIONS.
First Aid: INHALATION:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
RESP) (FP N). EYES:IMMEDIATELY FLUSH WITH WATER FOR AT LEAST 15 MINUTES. GET
MEDICAL ATTENTION. SKIN:WIPE OFF THOROUGHLY AND FLUSH WITH PLENTY OF WATER
FOR 15 MINUTES. GET MEDICAL ATTENTION IF REACTION DEVELOPS. INGESTION:GET
MEDICAL ATTENTION.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE PRODUCT AND USE ABSORBENT MATERIAL TO TAKE
CARE OF ANY OIL-LIKE RESIDUES.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: MANUFACTURER SUGGESTS THAT ALL LOCAL, STATE AND FEDERAL
REGULATIONS CONCERNING HEALTH AND POLLUTION BE REVIEWED TO DETERMINE APPROVED
DISPOSAL PROCEDURES. CONTACT MANUFACTURER IF THERE ARE ANY DISP QU ESTIONS.
RQ:ING 3:50,000 PBS, ING 4:250,000 LBS.
Handling And Storage Precautions: STORE BELOW 90F/32C. USE REASONABLE CARE AND
CAUTION. KEEP CONTAINER CLOSED.
Other Precautions: THESE PRECAUTIONS ARE FOR ROOM TEMPERATURE HANDLING; USE AT
ELEVATED TEMPERATURES, OR AEROSOL/SPRAY APPLICATIONS, MAY REQUIRE ADDED
PRECAUTIONS. AVOID EYE AND SKIN CONTACT. DO NOT TAKE INTERNALLY.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: CC
Flash Point Text: >212F,>100C
Extinguishing Media: WATER FOG, CO*2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: HAZARDOUS NITROGEN OXIDES AND COMPOUNDS OF
IODINE AND SULFUR FORM.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN (FP N). NONE SHOULD BE NEEDED.
Ventilation: NONE SHOULD BE NEEDED.
Protective Gloves: RUBBER OR PLASTIC GLOVES.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: AVOID CONT BY USING IMPERVIOUS PROT CLTHG;
RUB/PLASTIC APRONS, BOOTS, ETC. ANSI APPRVD EMER EYE WASH & DELUGE (SUP DAT)
Work Hygienic Practices: USE PROT GLOVES AS MIN & WASH IMMED UPON ANY
DETECTABLE CONT. GOOD PRACT REQS THAT GROSS AMT OF CHEM BE REMOVED (SUPDAT)
Supplemental Safety and Health: HAZ DECOMP PRODS:BURNED CARBON PRODUCTS,
INCLUDES FORMALDEHYDE. HYGIENE PRACT:FROM THE SKIN AS SOON AS PRACTICAL,
ESPECIALLY BEFORE EATING OR SMOKING. OTHER PROT EQUIP:SHOWER (FP N).
=======================================================
Physical/Chemical Properties
=======================================================
Spec Gravity: 1.35 @ 77F
Appearance and Odor: SOME ODOR, PASTE-LIKE, WHITE.
Percent Volatiles by Volume: 20(WT)
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: EXPOSURE TO AIR UNTIL READY TO USE-PRODUCT CURES.
Materials To Avoid: OXIDIZING MATERIAL CAN CAUSE A REACTION.
Hazardous Decomposition Products: NITROGEN & METAL OXIDES, SILICON DIOXIDE,
CARBON DIOXIDE, CMPDS OF IODINE & SULFUR & TRACES OF INCOMPLETELY (SUPP DATA)
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SILICONE PLUS PREMIUM 100% SIL BTHTB SLNT, K/B
Company: DOW CORNING CORP
Street: 3901 S SAGINAW RD
PO Box: 997
City: MIDLAND MI
Zipcode: 48686-0997
Health Emergency Phone: 517-496-5900
Label Required IND: Y
Date Of Label Review: 09/05/1995
Status Code: C
Label Date: 09/05/1995
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. ACUTE:EYES:DIRECT CONTACT IRRITATES
SLIGHTLY TO MODERATELY WITH REDNESS AND SWELLING. SKIN:SINGLE RELATIVELY
SHORT EXPOSURE (LESS THAN 24 HOURS) IRRITATES. REPEATED, PROLONGED CONTACT
(24 TO 48 HOURS) IRRITATES SERIOUSLY, MAY BURN MILDLY. REPEATED CONTACT MAY
CAUSE ALLERGIC SENSITIZATION. INHALATION:IRRITATES RESPIRATORY PASSAGES AND
EYES VERY SLIGHTLY. INGESTION:SMALL AMOUNTS TRANSFE RRED TO THE MOUTH BY
FINGERS DURING USE, ETC., SHOULD NOT INJURE. SWALLOWING LARGE AMOUNTS MAY
INJURE SLIGHTLY. COMMENTS:DIETHYLAMINE IS A KNOWN SKIN SENSITIZER.
CHRONIC:NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.