CANON USA INC -- MINI-CARTRIDGE E-16 (GREEN), F41-8821-700
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BYWQJ
MSDS NAME: MINI-CARTRIDGE E-16 (GREEN), F41-8821-700
Responsible Party
Name: CANON USA INC
Address: ONE CANON PLAZA
City: LAKE SUCCESS NY 11042
Info Phone: 516-328-5600
Emergency Phone Number: 800-424-9300(CHEMTREC)
Preparer's Name: JOSEPH PALMERI
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: CANON USA INC
Address: ONE CANON PLZ
City: NEW HYDE PARK NY 11042
Phone: 516-328-5000; 5600
Name: CANON USA INC
Address: ONE CANON PLAZA
City: LAKE SUCCESS NY 11042
Phone: 516-328-5600
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: TONER POWDER IS NOT ACCESSIBLE, UNLESS CARTRIDGE IS FORCED
OPEN OR IS BROKEN INTO. INHALATION:TONER IS A FINELY DIVIDED SOLID. DO NOT
BREATHE DUST. EYE CONTACT:NO SPECIFIC HAZARD KNOWN TO CANON. HOWEV ER, ANY
MATERIAL CONTACTING EYE MAY BE IRRITATING. SKIN CONTACT:LOW HAZARD FOR
INDUSTRIAL HANDLING. (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ:CHRONIC:NO DATA AVAILABLE FOR
CHRONIC EFFECTS OF OVEREXPOSURE.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: INHAL:REMOVE FROM EXPOSURE TO FRESH AIR. EYE:OPEN EYE & FLUSH
W/PLENTY OF WATER FOR AT LEAST 15 MINUTES. IF IRRITATION PERSISTS, GET
MEDICAL ASSISTANCE. SKIN:WASH W/SOAP & WATER. INGEST:DRINK SEVERAL
GLASSES OF WATER. CALL MD.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: NO TONER SPILLAGE SHOULD OCCUR IN NORMAL OPERATING OR
HANDLING. IF IT SHOULD OCCUR, AVOID INHALATION OF DUST. SWEEP MATERIAL ONTO
PAPER & PLACE IN FIBER CARTON.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: NO SPECIAL DISP TECHNIQUE REQUIRED. ENSURE COMPLIANCE
W/FEDERAL, STATE &/OR LOCAL REGS. TONER MAY BE CONSIDERED PLASTIC WASTE.
IF INCINERATED, PACKAGE IT ADEQUATELY. DO NOT DISPERSE TONER INTO FIRE. C
ARTRIDGE IS CONSTRUCTED FROM PLASTICS &METAL.
Handling And Storage Precautions: KEEP OUT OF REACH OF CHILDREN. KEEP FROM
CONTACT W/OXIDIZING MATERIALS.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: WATER, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: THIS MATERIAL, LIKE MOST ORGANIC MATERIAL IN
POWDER FORM, IS CAPABLE OF CREATING A DUST EXPLOSION.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE
OF CONCERN (FP N).
Ventilation: GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves: NONE REQUIRED.
Eye Protection: NONE REQUIRED.
Other Protective Equipment: NONE.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Physical/Chemical Properties
=======================================================
M.P/F.P Text: >212F,>100C
Vapor Pres: NEGLIGIBLE
Spec Gravity: 1-1.2 (H*2O=1)
Evaporation Rate & Reference: NEGLIGIBLE
Solubility in Water: NEGLIGIBLE
Appearance and Odor: FINE POWDER; SLIGHT PLASTIC ODOR.
Percent Volatiles by Volume: NEGLIG
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: STRONG OXIDIZERS.
Hazardous Decomposition Products: AS WITH ANY OTHER ORGANIC MATERIAL,
DECOMPOSITION WILL PRODUCE CARBON DIOXIDE & CARBON MONOXIDE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: MINI-CARTRIDGE E-16 (GREEN), F41-8821-700
Company: CANON USA INC
Street: ONE CANON PLAZA
City: LAKE SUCCESS NY
Zipcode: 11042
Health Emergency Phone: 800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 09/19/1995
Status Code: C
Label Date: 09/19/1995
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE:INHALATION:TONER IS A FINELY DIVIDED SOLID. DO
NOT BREATHE DUST. EYE CONTACT:ANY MATERIAL CONTACTING EYE MAY BE IRRITATING.
CHRONIC:NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.