BOUGHT ACCORDING TO SPECIFICAT -- BRAZING ALLOY, SILVER
=======================================================
Material Safety Data Sheet
=======================================================
NIIN: 00-262-4186
MSDS Num: BPBVC
MSDS NAME: BRAZING ALLOY, SILVER
Responsible Party
Name: BOUGHT ACCORDING TO SPECIFICATION
Address: DEFENSE GENERAL SUPPLY CENTER
City: RICHMOND VA 23297-5680
Info Phone: 804-279-4371
Emergency Phone Number: 804-279-3131
Preparer's Name: DGSC-SSH
Review Ind: Y
Published: Y
=======================================================
Preparer Co. when other than Responsible Party Co.
=======================================================
Name: MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
Address: DEPTS/AGENCIES UNDER AUTH OF DEF STD
Box: MANUAL
City: 4120 3-M NK 00000
=======================================================
Contractor Summary
=======================================================
Name: MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
Address: DEPTS/AGENCIES UNDER AUTH OF DEF STD
Box: MANUAL
City: 4120 3-M NK 00000
Phone: 804-279-4371 DSN 695-4371
=======================================================
Item Description Information
=======================================================
Item Manager: S9G
Item Name: BRAZING ALLOY,SILVER
Specification Number: QQ-B-654
Type/Grade/Class: GRADE IV
Unit of Issue: TO
UI Container Qty: 0
=======================================================
Ingredients
=======================================================
Cas: 7440-22-4
RTECS #: VW3500000
Name: SILVER (SARA III)
% Wt: 49-51
Other REC Limits: NONE SPECIFIED
OSHA PEL: 0.01 MG/M3
ACGIH TLV: 0.1 MG/M3; 9192
EPA Rpt Qty: 1 LB
DOT Rpt Qty: 1 LB
------------------------------
Cas: 7440-50-8
RTECS #: GL5325000
Name: COPPER (SARA III)
% Wt: 14.5-16
Other REC Limits: NONE SPECIFIED
OSHA PEL: 0.1MG/M3 FUME/1 DUST
ACGIH TLV: 0.2MG/M3 FUME; 9192
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
------------------------------
Cas: 1314-13-2
RTECS #: ZH4810000
Name: ZINC OXIDE
% Wt: 14.5-18
Other REC Limits: NONE SPECIFIED
OSHA PEL: 15MG/M3 TDUST/5 FUME
ACGIH TLV: 10MG/M3 TDUST; 9293
------------------------------
Cas: 1306-19-0
RTECS #: EV1925000
Name: CADMIUM OXIDE (SARA III)
% Wt: 17-19
Other REC Limits: NONE SPECIFIED
OSHA PEL: SEE 1910.1027
ACGIH TLV: 0.05 MG(CD)/M3; 9293
------------------------------
Name: OTHER ELEMENTS (TYPE NOT SPECIFIED)
% Wt: 0.15
Other REC Limits: NONE RECOMMENDED
OSHA PEL: NOT ESTABLISHED
ACGIH TLV: NOT ESTABLISHED
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NOT ESTABLISHED
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: YES
OSHA: NO
Effects of Exposure: SHORT TERM EXPOSURE TO WELDING FUMES, GASES OR DUST MAY
RESULT IN DISCOMFORT SUCH AS DIZZINESS, NAUSEA, FEVER, DRYNESS AND/OR
IRRITATION OF NOSE, THROAT AND EYES. SKIN SENSITIVITY MAY ALSO BE NOTED. L
ONG TERM EXPOSURE TO FUMES/GASES/DUST MAY CAUSE PULMONARY IRRITATION OR
PNEUMOCONIOSIS.
Explanation Of Carcinogenicity: CADMIUM IS CONSIDERED POSSIBLE CARCINOGENS
UNDER OSHA AND EPA. RESPIRATORY CANCER FROM WELDING IS UNCONFIRMED.
Signs And Symptions Of Overexposure: EXPOSURE TO WELDING FUMES MAY RESULT IN
DISCOMFORT SUCH AS DIZZINESS, NAUSEA, FEVER, DRYNESS AND/OR IRRITATION OF
NOSE, THROAT AND EYES. SKIN SENSITIVITY MAY ALSO BE NOTED. WATERY EYES,
HEADACHE, BREA THING DIFFICULTY, FREQUENT COUGHING AND/OR CHEST PAINS MAY
OCCUR FROM ACUTE EXPOSURE. TOXIC GASES CAN BE FATAL.
Medical Cond Aggravated By Exposure: INDIVIDUALS WITH IMPAIRED PULMONARY
FUNCTION OR ILLNESS MAY HAVE SYMPTOMS EXACERBATED BY IRRITANTS CONTAINED IN
WELDING FUMES.
First Aid: IN CASE OF ELECTRICAL SHOCK, TURN OFF POWER PRIOR TO REMOVAL FROM
EXPOSURE AREA AND ADMINISTRATION OF FIRST AID. REMOVE FROM EXPOSURE AREA AND
CALL FOR MEDICAL AID. ADMINISTER OXYGEN IF BREATHING IS D IFFICULT. IF NOT
BREATHING, BEGIN ARTIFICIAL RESPIRATION. IF NO DETECTABLE PULSE, BEGIN
EXTERNAL HEART MASSAGE. EMPLOY FIRST AID TECHNIQUES RECOMMENDED BY THE
AMERICAN RED CROSS.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: CLEAN UP ANY GRINDING DUST OR WASTE RESIDUES AND
PLACE IN SUITABLE DOT APPROVED CONTAINERS AND DISPOSE OF IN FULL COMPLIANCE
WITH FEDERAL, STATE AND LOCAL REGULATIONS. AVOID INHALATION AND SKIN EXPOSU
RE.
Waste Disposal Methods: DISPOSE I/A/W FEDERAL, STATE & LOCAL REGULATIONS
Handling And Storage Precautions: WEAR GLOVES AND FLAME RETARDANT CLOTHING WHEN
CUTTING, GRINDING OR WELDING. DO NOT EXPOSE SKIN TO RADIATION WHEN HOT
CUTTING OR WELDING.
Other Precautions: PROVIDE PROTECTIVE SCREENS TO SHIELD OTHERS. WHEN ELECTRODES
AND FLUXES ARE CONSUMED, THE FUME AND GAS DECOMPOSITION PRODUCTS GENERATED
ARE DIFFERENT IN FORM FROM THE INGREDIENTS LISTED. NEW COMPOUNDS NOT IN THE
ELECTRODES MAY FORM.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: NONFLAMMABLE
Extinguishing Media: NONCOMBUSTIBLE. USE SUITABLE EXTINGUISHING MEDIA FOR THE
NEARBY FIRE.
Fire Fighting Procedures: FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER SPRAY TO
COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard: FIRE OR EXCESSIVE HEAT MAY CAUSE PRODUCTION OF
HAZARDOUS DECOMPOSITION PRODUCTS.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE WELD FUME RESPIRATOR OR AIR SUPPLIED RESPIRATOR
WHEN CUTTING, GRINDING OR WELDING IN A CONFINED SPACE OR WHERE LOCAL EXHAUST
OR GENERAL VENTILATION DOES NOT KEEP EXPOSURE BELOW RECOMMENDED LIMITS. USE
ONLY NIOSH APPROVED RESPIRATORS.
Ventilation: USE ENOUGH VENTILATION WHEN CUTTING, GRINDING OR WELDING TO KEEP
THE DUST, FUMES & GASES FROM THE WORKERS BREATHING ZONE
Protective Gloves: FLAMEPROOF GAUNTLER GLOVES
Eye Protection: OSHA APPROVED GOGGLES/FACE SHIELD W/LENS
Other Protective Equipment: FLAME RETARDANT CLOTHING WHEN CUTTING, GRINDING OR
WELDING. DO NOT EXPOSE SKIN TO RADIATION WHEN HOT CUTTING OR WELDING.
Work Hygienic Practices: WASH THOROUGHLY BEFORE EATING OR SMOKING. LAUNDER
CONTAMINATIED CLOTHING BEFORE REUSE.
Supplemental Safety and Health: WELDING AND HOT CUTTING FUMES & GASES
CANNOT BE CLASSIFIED SIMPLY. THEIR COMPOSITION AND QUANTITY ARE DEPENDENT ON
THE METAL BEING WELDED, THE PROCEDURES, PROCESSES AND THE TYPE OF WIRE OR
ELECTRODES USED. OTHER INFLUENCING FACTORS ARE THEPRESENCE OF CONTAMINANTS.
CHLORINATED SOLVENTS MAY DECOMPOSE TO TOXIC GASES.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: N1
M.P/F.P Text: 1160F,627C
Decomp Text: UNKNOWN
Appearance and Odor: SOLID STRIP
Corrosion Rate: UNKNOWN
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE
Materials To Avoid: MINERAL ACIDS, STRONG OXIDIZING AGENTS
Hazardous Decomposition Products: WELDING/CUTTING OPERATIONS MAY INCLUDE
ELEMENTAL METALS, OXIDES OF THE METALS, FUMES/GASES & ELECTROMAGNETIC
RADIATION.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NONE. WILL NOT OCCUR.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
Transportation Information
=======================================================
Trans ID NO: 62645
MSDS NAME: BRAZING ALLOY, SILVER
MSDS Prepared Date: 10/19/1992
Review Date: 10/19/1992
Multiple KIT Number: 0
Review IND: Y
Unit Of Issue: TO
Container QTY: 0
=======================================================
Detail DOT Information
=======================================================
DOT PSN Code: ZZZ
DOT Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail IMO Information
=======================================================
IMO PSN Code: ZZZ
IMO Proper Shipping Name: NOT REGULATED FOR THIS MODE OF TRANSPORTATION
=======================================================
Detail IATA Information
=======================================================
IATA PSN Code: ZZZ
IATA Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail AFI Information
=======================================================
AFI PSN Code: ZZZ
AFI Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: BRAZING ALLOY, SILVER
Company: MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
Street: DEPTS/AGENCIES UNDER AUTH OF DEF STD
PO Box: MANUAL
City: 4120 3-M NK
Zipcode: 00000
Health Emergency Phone: 804-279-3131
Label Required IND: Y
Date Of Label Review: 10/19/1992
Status Code: C
Label Date: 10/19/1992
Origination Code: F
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: SHORT TERM EXPOSURE TO WELDING FUMES, GASES OR DUST MAY
RESULT IN DISCOMFORT SUCH AS DIZZINESS, NAUSEA, FEVER, DRYNESS AND/OR
IRRITATION OF NOSE, THROAT AND EYES. SKIN SENSITIVITY MAY ALSO BE NOTED. L
ONG TERM EXPOSURE TO FUMES/GASES/DUST MAY CAUSE PULMONARY IRRITATION OR
PNEUMOCONIOSIS. WEAR GLOVES AND FLAME RETARDANT CLOTHING WHEN CUTTING,
GRINDING OR WELDING. DO NOT EXPOSE SKIN TO RADIATION WHEN HOT CUTTING OR
WELDING. FIRST AID: IN CASE OF ELECTRICAL SHOCK, TURN OFF POWERPRIOR TO
REMOVAL FROM EXPOSURE AREA AND ADMINISTRATION OF FIRST AID. REMOVE FROM
EXPOSURE AREA AND CALL FOR MEDICAL AID. ADMINISTER OXYGEN IF BREATHING IS
DIFFICULT.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
MR. STICKY
| |
|
SQR LITH PROCESSOR REPLENISHER-PART BR
| 7732-18-5
584-08-7
111-42-2
1303-96-4
1310-58-3
141-43-5 |
|
SPRAY PAINT (AEROSOL) PN 22C890
| 8030-30-6
108-88-3
67-64-1
74-98-6
75-28-5
106-97-8
1330-20-7
1333-86-4
1343-90-4
64742-94-5 |
|
ELECTROLYTE BATTERY ACID
| 7664-93-9
7732-18-5 |
|
5925611P1
| 7782-42-5 |
|
25010N PEICE 6
| 12001-29-5 |
|
NS-4405-FG,GREASE
| |
|
500023, ARP 2, PRODUCT CODE 50002
| |
|
SWEET AIR
| 71-55-6
64742-48-9
67-63-0
124-38-9 |
|
500 LUBECON SERIES I LUBRICANT
| 8042-47-5
64742-48-9
103-24-2
61788-61-2
1317-33-5
128-37-0
9036-19-5 |
|
60071 5 OZ V711 SILICONE SEALANT
| 63148-62-9
7631-86-9 |
|
4487 HARDNESS #7 REAGENT
| 6381-92-6
7791-18-6
7732-18-5 |
|
92-90123-12 QUICKSILVER SPRAY PAINT-LIGHT MARINER GRAY
| |
|
H2565, HITEC 2565 PERFORMANCE ADDITIVE
| |
|
149, GENERAL MEDICAL CLEANER CONCENTRATE
| 61791-32-0
67-63-0
7732-18-5 |
|
EPOXY SYSTEM 736-157, PART A
| 13463-67-7
90-72-2
14808-60-7 |
|
EPOXY SYSTEM 736-157, PART B
| 25068-38-6
14808-60-7
13463-67-7 |
|
INTERGARD HS EPOXY REACTOR, TBA327
| |
|
148, GENERAL MEDICAL CLEANER CONCENTRATE
| 7732-18-5
61791-32-0
67-63-0 |
|
FC-206CF LIGHT WATER BRAND AQUEOUS FILM FOR
| 7732-18-5
112-34-5
57-13-6
102-71-6
29385-43-1 |
|
#6 HEATING OIL
| 68476-33-5 |
|
CARBON DIOXIDE GAS
| 124-38-9 |
|
CARBON DIOXIDE,GAS
| 124-38-9 |
|
TRIM SOL
| |
|
PACKING MATERIAL,PART NO.UNKNOWN
| |
|
BRAZING ALLOY, SILVER
| 7440-22-4
7440-50-8
1314-13-2
1306-19-0 |
|
BRAZING ALLOY, SILVER
| 7440-22-4
7440-50-8
7723-14-0 |
|
SODIUM HYDROXIDE
| 1310-73-2 |
|
7342 GOLD MEDAL ETCH
| |
|
EUTECSOL 682 FLUX
| |
|
VBD-10 DAMPING COMPOUND
| 85-68-7
12001-26-2
14808-60-7
9004-34-6
1317-65-3
1332-58-7 |
|
187X26, MOLD RELEASE 225
| 67-63-0
64742-89-8
110-82-7
108-88-3
1330-20-7
8052-41-3 |
|
POLYOL INSTAPAK-200 COMPONENT B
| |
|
RTV664B
| |
|
108 PENETRATING OIL
| 74-98-6
75-28-5
68476-34-6
64742-52-5 |
|
260 0105, HI-POINT 90 RED
| |
|
SYNCOMP 100
| |
|
EZ-80
| |
|
TX129, CRT TERMINAL CLEANER (4 OZ)
| |
|
DISHWASHING COMPOUND HAND TYPE II
| |
|
SA 829 0032, GREASE BALL AND ROLLER
| |
|
TAYLOR 295 FLOOR COVERING ADHESIVE
| |
|
200-0159, 6315 BLACK DEVELOPER
| 1333-86-4
1309-38-2
1313-13-9
25767-47-9
9003-07-4
68797-54-6
7631-86-9 |
|
MIL-H5606F(1);A0600;HYDRAULIC FLUID MLS 89-10
| 64742-46-7
64741-97-5
64742-53-6 |
|
DESICCANT
| 63231-67-4 |
|
F41-6902-000, CLC 500 STARTER BLACK
| |
|
CLEANING COMPOUND,AEROSPACE EQUIPMENT,111/113,MIL-C-87937
| |
|
PAC-LEI
| |
|
MS 5626 (SURFACTANT)
| |
|
MIL-F-14256D FLUX
| 67-63-0 |
|
|