BOUGHT ACCORDING TO SPECIFICAT -- BRAZING ALLOY, SILVER
=======================================================
Material Safety Data Sheet
=======================================================
NIIN: 00-262-4202
MSDS Num: BPBVD
MSDS NAME: BRAZING ALLOY, SILVER
Responsible Party
Name: BOUGHT ACCORDING TO SPECIFICATION
Address: DEFENSE GENERAL SUPPLY CENTER
City: RICHMOND VA 23297-5680
Info Phone: 804-279-4371
Emergency Phone Number: 804-279-3131
Preparer's Name: DGSC-SSH
Review Ind: Y
Published: Y
=======================================================
Preparer Co. when other than Responsible Party Co.
=======================================================
Name: MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
Address: DEPTS/AGENCIES UNDER AUTH OF DEF STD
Box: MANUAL
City: 4120 3-M NK 00000
=======================================================
Contractor Summary
=======================================================
Name: MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
Address: DEPTS/AGENCIES UNDER AUTH OF DEF STD
Box: MANUAL
City: 4120 3-M NK 00000
Phone: 804-279-4371 DSN 695-4371
=======================================================
Item Description Information
=======================================================
Item Manager: S9G
Item Name: BRAZING ALLOY,SILVER
Specification Number: QQ-B-654
Unit of Issue: LB
UI Container Qty: 0
=======================================================
Ingredients
=======================================================
Cas: 7440-22-4
RTECS #: VW3500000
Name: SILVER (SARA III)
% Wt: 14.5-15
Other REC Limits: NONE SPECIFIED
OSHA PEL: 0.01 MG/M3
ACGIH TLV: 0.1 MG/M3; 9192
EPA Rpt Qty: 1 LB
DOT Rpt Qty: 1 LB
------------------------------
Cas: 7440-50-8
RTECS #: GL5325000
Name: COPPER (SARA III)
% Wt: BALANCE
Other REC Limits: NONE SPECIFIED
OSHA PEL: 0.1MG/M3 FUME/1 DUST
ACGIH TLV: 0.2MG/M3 FUME; 9192
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
------------------------------
Cas: 7723-14-0
RTECS #: TH3500000
Name: PHOSPHOROUS (YELLOW) (SARA III)
% Wt: 4.8-5.2
Other REC Limits: NONE SPECIFIED
OSHA PEL: 0.1 MG/M3
ACGIH TLV: 0.1 MG/M3; 9192
EPA Rpt Qty: 1 LB
DOT Rpt Qty: 1 LB
------------------------------
Name: OTHER ELEMENTS (TYPE NOT SPECIFIED)
% Wt: 0.15
Other REC Limits: NONE RECOMMENDED
OSHA PEL: NOT ESTABLISHED
ACGIH TLV: NOT ESTABLISHED
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NOT ESTABLISHED.
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: MAY CAUSE METAL FUME FEVER. INFRARED RADIATION (HEAT RAYS)
FROM FLAME OR HOT METAL DURING WELDING CAN INJURE EYES.
Explanation Of Carcinogenicity: PRODUCT CONTAINS NO INGREDIENTS CURRENTLY
CLASSIFIED AS CARCINOGENIC BY NTP, IARC OR OSHA.
Signs And Symptions Of Overexposure: COPPER FUME MAY CAUSE METAL FUME FEVER.
SHORT TERM SYMP-METAL TASTE IN MOUTH, DRY/IRRITATED THROAT WITH COUGH,
SHORTNESS OF BREATH, NAUSES, FEVER, ACHES, CHILLS, PULMONARY
IRRITATION/PNEUMOCONIOSIS PO SSIBLE WITH LONG TERM EXPOSURE TO WELDING FUMES,
GASES, DUST.
Medical Cond Aggravated By Exposure: WELDING FUMES MAY AGGRAVATE EXISTING LUNG
ILLNESSES.
First Aid: REMOVE FROM DUST OR FUME EXPOSURE. IF BREATHING HAS STOPPED,PERFORM
ARTIFICIAL RESPIRATION. SUMMON MEDICAL AID IMMEDIATELY.
=======================================================
Handling and Disposal
=======================================================
Neutralizing Agent: NONE KNOWN.
Waste Disposal Methods: WASTE DISPOSAL MUST BE IN ACCORDANCE W/FEDERAL, STATE
& LOCAL REGULATIONS.
Handling And Storage Precautions: READ & UNDERSTAND MFR'S INSTRUCTNS &
PRECAUTIONARY LABEL ON PRODUCT.SEE AMERICAN NATIONAL STD Z49.1,SFTY IN
WELDING&CUTTING,&OSHA PUB 2206 (29CFR1910)
Other Precautions: REEVALUATE HAZARDS BASED ON TYPE OF WELDING FLUX USED.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: NONFLAMMABLE
Lower Limits: NOT KNOWN
Upper Limits: NOT KNOWN
Extinguishing Media: NONFLAMMABLE. USE MEDIA SUITABLE FOR SURROUNDING FIRE.
Fire Fighting Procedures: NONFLAMMABLE. USE PROCEDURES SUITABLE FOR SURROUNDING
FIRE.
Unusual Fire/Explosion Hazard: (NONFLAMMABLE) OPEN FLAME & SPARKS CAN
IGNITE COMBUSTIBLES,SEE ANSI/ASC Z49.1-1983 SECTION 6.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH/MSHA APPROVED RESPIRABLE FUME RESPIRATR/AIR
SUPPLIED RESPIRATR
Ventilation: ENOUGH VENT,LOC EXHAUST AT FLAME TO KEEP FUMES&GASES <
TLV'S
Protective Gloves: WELDER'S GLOVES
Eye Protection: FILTER LENS-PROPER SHADE#
Other Protective Equipment: ARM PROTECTORS,APRONS,HATS,SHOULDER PROT,DARK
STURDY CLOTHES
Work Hygienic Practices: WASH HANDS WITH SOAP AND WATER BEFORE EATING, DRINKING
OR SMOKING.
Supplemental Safety and Health: AVOID CREATION, INHALATION OF DUST, FUMES,
GASES. KEEP HEAD OUT OF THE FUMES.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: N1
B.P. Text: NOT KNOWN
M.P/F.P Text: NOT KNOWN
Decomp Text: UNKNOWN
Vapor Pres: NIL
Vapor Density: NIL
Spec Gravity: NOT KNOWN
Evaporation Rate & Reference: NIL
Solubility in Water: NIL
Appearance and Odor: SOLID WIRE/ROD. ROD POSSIBLY COATED WITH CHEMICAL FLUX.
Percent Volatiles by Volume: NIL
Corrosion Rate: UNKNOWN
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE KNOWN.
Materials To Avoid: NONE KNOWN.
Hazardous Decomposition Products: SILVER (METAL & SOLUBLE COMPOUNDS), COPPER
(FUME)
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NONE. WILL NOT OCCUR.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: BRAZING ALLOY, SILVER
Company: MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
Street: DEPTS/AGENCIES UNDER AUTH OF DEF STD
PO Box: MANUAL
City: 4120 3-M NK
Zipcode: 00000
Health Emergency Phone: 804-279-3131
Label Required IND: Y
Date Of Label Review: 10/19/1992
Status Code: C
MFG Label NO: NONE
Label Date: 10/19/1992
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: READ & UNDERSTAND MFR'S INSTRUCTNS &
PRECAUTIONARY LABEL ON PRODUCT.SEE AMERICAN NATIONAL STD Z49.1,SFTY IN
WELDING&CUTTING,&OSHA PUB 2206 (29CFR1910) FIRST AID: REMOVE FROM
DUST OR FUME EXPOSURE. IF BREATHING HAS STOPPED,PERFORM ARTIFICIAL
RESPIRATION. SUMMON MEDICAL AID IMMEDIATELY.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
MR. STICKY
| |
|
SQR LITH PROCESSOR REPLENISHER-PART BR
| 7732-18-5
584-08-7
111-42-2
1303-96-4
1310-58-3
141-43-5 |
|
SPRAY PAINT (AEROSOL) PN 22C890
| 8030-30-6
108-88-3
67-64-1
74-98-6
75-28-5
106-97-8
1330-20-7
1333-86-4
1343-90-4
64742-94-5 |
|
ELECTROLYTE BATTERY ACID
| 7664-93-9
7732-18-5 |
|
5925611P1
| 7782-42-5 |
|
25010N PEICE 6
| 12001-29-5 |
|
NS-4405-FG,GREASE
| |
|
500023, ARP 2, PRODUCT CODE 50002
| |
|
SWEET AIR
| 71-55-6
64742-48-9
67-63-0
124-38-9 |
|
500 LUBECON SERIES I LUBRICANT
| 8042-47-5
64742-48-9
103-24-2
61788-61-2
1317-33-5
128-37-0
9036-19-5 |
|
60071 5 OZ V711 SILICONE SEALANT
| 63148-62-9
7631-86-9 |
|
4487 HARDNESS #7 REAGENT
| 6381-92-6
7791-18-6
7732-18-5 |
|
92-90123-12 QUICKSILVER SPRAY PAINT-LIGHT MARINER GRAY
| |
|
H2565, HITEC 2565 PERFORMANCE ADDITIVE
| |
|
149, GENERAL MEDICAL CLEANER CONCENTRATE
| 61791-32-0
67-63-0
7732-18-5 |
|
EPOXY SYSTEM 736-157, PART A
| 13463-67-7
90-72-2
14808-60-7 |
|
EPOXY SYSTEM 736-157, PART B
| 25068-38-6
14808-60-7
13463-67-7 |
|
INTERGARD HS EPOXY REACTOR, TBA327
| |
|
148, GENERAL MEDICAL CLEANER CONCENTRATE
| 7732-18-5
61791-32-0
67-63-0 |
|
FC-206CF LIGHT WATER BRAND AQUEOUS FILM FOR
| 7732-18-5
112-34-5
57-13-6
102-71-6
29385-43-1 |
|
#6 HEATING OIL
| 68476-33-5 |
|
CARBON DIOXIDE GAS
| 124-38-9 |
|
CARBON DIOXIDE,GAS
| 124-38-9 |
|
TRIM SOL
| |
|
PACKING MATERIAL,PART NO.UNKNOWN
| |
|
BRAZING ALLOY, SILVER
| 7440-22-4
7440-50-8
1314-13-2
1306-19-0 |
|
BRAZING ALLOY, SILVER
| 7440-22-4
7440-50-8
7723-14-0 |
|
SODIUM HYDROXIDE
| 1310-73-2 |
|
7342 GOLD MEDAL ETCH
| |
|
EUTECSOL 682 FLUX
| |
|
VBD-10 DAMPING COMPOUND
| 85-68-7
12001-26-2
14808-60-7
9004-34-6
1317-65-3
1332-58-7 |
|
187X26, MOLD RELEASE 225
| 67-63-0
64742-89-8
110-82-7
108-88-3
1330-20-7
8052-41-3 |
|
POLYOL INSTAPAK-200 COMPONENT B
| |
|
RTV664B
| |
|
108 PENETRATING OIL
| 74-98-6
75-28-5
68476-34-6
64742-52-5 |
|
260 0105, HI-POINT 90 RED
| |
|
SYNCOMP 100
| |
|
EZ-80
| |
|
TX129, CRT TERMINAL CLEANER (4 OZ)
| |
|
DISHWASHING COMPOUND HAND TYPE II
| |
|
SA 829 0032, GREASE BALL AND ROLLER
| |
|
TAYLOR 295 FLOOR COVERING ADHESIVE
| |
|
200-0159, 6315 BLACK DEVELOPER
| 1333-86-4
1309-38-2
1313-13-9
25767-47-9
9003-07-4
68797-54-6
7631-86-9 |
|
MIL-H5606F(1);A0600;HYDRAULIC FLUID MLS 89-10
| 64742-46-7
64741-97-5
64742-53-6 |
|
DESICCANT
| 63231-67-4 |
|
F41-6902-000, CLC 500 STARTER BLACK
| |
|
CLEANING COMPOUND,AEROSPACE EQUIPMENT,111/113,MIL-C-87937
| |
|
PAC-LEI
| |
|
MS 5626 (SURFACTANT)
| |
|
MIL-F-14256D FLUX
| 67-63-0 |
|
|