ITW PHILADELPHIA RESINS -- PHILLYCLAD 1014-NU RUST INHIBITOR GRAY (SUPDA
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CBBJF
MSDS NAME: PHILLYCLAD 1014-NU RUST INHIBITOR GRAY (SUPDAT)
Kit Part: Y
Responsible Party
Name: ITW PHILADELPHIA RESINS
Address: 130 COMMERCE DR
City: MONTGOMERYVILLE PA 18936
Info Phone: 215-855-8450
Emergency Phone Number: 800-424-9300 (CHEMTREC)
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: ITW PHILADELPHIA RESINS
Address: 130 COMMERCE DR
City: MONTGOMERYVILLE PA 18936
Phone: 215-855-8450
Name: ITW PHILADELPHIA RESINS
Address: 130 COMMERCE DRIVE
Box: 454
City: MONTGOMERYVILLE PA 18936
Phone: 508-777-1100
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: SEE INGREDIENT 3
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE:EYES & SKIN:MODERATE IRRITANT. INHALATION:MAY
IRRITATE RESPIRATORY TRACT CAUSING HEADACHES, NAUSEA, DIZZINESS AND/OR
NARCOSIS WHICH IS TYPICAL FOR SOLVENT BASE PRODUCTS. CHRONIC:PROLONGED OR REP
EATED EXPOSURE TO POLYAMIDE RESINS MAY CAUSE ASTHMA AND SKIN SENSITIZATION OR
OTHER ALLERGIC (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ:RESPONSES. OVEREXPOSURE TO
SOLVENTS ABOVE THEIR TLV'S MAY CAUSE LIVER AND KIDNEY DISORDERS.
Medical Cond Aggravated By Exposure: PREEXISTING SKIN AND EYE DISORDERS MAY BE
AGGRAVATED BY EXPOSURE TO THIS PRODUCT.
First Aid: EYES:FLUSH W/CLEAN WATER FOR @ LEAST 15 MINS WHILE GENTLY HOLDING
EYELIDS OPEN. GET IMMED MED ATTN. SKIN:IMMED REMOVE CONTAMD CLTHG, & WASH
W/PLENTY OF SOAP & WATER. GET MED ATTN IF SYMPS PERSIST. INH AL:REMOVE
PATIENT TO FRESH AIR. ADMIN OXYG IF BRTHG IS DFCLT. GET MED ATTN. INGEST:DO
NOT INDUCE VOMIT. GIVE VICTIM 2 GLASSES OF MILK/WATER TO DILUTE. GET IMMED
MED ATTN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: ELIM ALL IGNIT SOURCES. AVOID PERSONAL CONT. SCRAPE
UP AS MUCH AS POSS & PLACE IN SUITABLE, LBLD, CNTNR FOR WASTE DISP. PVNT
MATL FROM CONTACTING ANY WATER SOURCES/SEWERS LEADING TO SURFACE WATER.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE OF I/A/W APPLICABLE FEDERAL, STATE AND LOCAL
REGULATIONS.
Handling And Storage Precautions: STORE IN AREAS DESIGNED TO COMPLY W/ANSI/NFPA
30 FLAM & COMBUST LIQUIDS CODE. KEEP AWAY FROM OPEN FLAME & HIGH
TEMP. AVOID PRLNGD/RPTD SKIN CONT.
Other Precautions: PRACTICE GOOD HOUSEKEEPING PROC TO AVOID ALL SKIN CONT &
BRTHG OF VAPS. AVOID PRLNGD/RPTD INHAL OF HEATED VAPS/SPRAY MIST.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TCC
Flash Point Text: 80.0F,26.7C
Extinguishing Media: CO*2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N). WATER MAY BE USED TO COOL DOWN UNOPENED CONTAINERS IN THE
VINCINITY.
Unusual Fire/Explosion Hazard: CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN AREA
WHERE SPARKS OR OPEN FLAMES ARE PRESENT.
=======================================================
Control Measures
=======================================================
Respiratory Protection: IN OUTDOOR/OPEN AREAS, USE NIOSH/MSHA APPRVD RESP TO
REMOVE SOLID AIRBORNE PARTICLES OF OVER SPRAY DURING SPRAY APPLIC. USE
NIOSH/MSHA APPRVD RESPIRATORS IN CONFINED AREAS.
Ventilation: SUFFICIENT VENT IN VOL & PATTERN SHOULD BE PROVIDED TO KEEP
AIR CONTAM CONC BELOW CURRENT APPLIC OSHA PEL EXPOS LIMITS.
Protective Gloves: CHEMICAL RESISTANT RUBBER GLOVES.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: CLEAN LONG-SLEEVE & LONG LEG CLTHG. ANSI APPRVD
EMERGENCY EYE WASH & DELUGE SHOWER (FP N).
Work Hygienic Practices: WASH THOROUGHLY AFTER HANDLING AND BEFORE SMOKING,
EATING OR USING TOILET FACILITIES.
Supplemental Safety and Health: USERS OF "L" VERSION OF SHOULD CONSULT "LR"
VERSION FOR ADDITIONAL INFORMATION (FP N). MFR TRADE NAME/PART NO:PRIMER
RESIN.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: >148F,>64C
Vapor Density: >1
Spec Gravity: 1.34
Solubility in Water: NIL
Appearance and Odor: GRAY LIQUID WITH AROMATIC ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: EXTREME HEAT, SPARKS, AND OPEN FLAMES.
Materials To Avoid: STRONG ACIDS AND OXIDIZING AGENTS.
Hazardous Decomposition Products: MAY FORM CO*2 AND NITROGEN OXIDE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: PHILLYCLAD 1014-NU RUST INHIBITOR GRAY (SUPDAT)
Company: ITW PHILADELPHIA RESINS
Street: 130 COMMERCE DRIVE
PO Box: 454
City: MONTGOMERYVILLE PA
Zipcode: 18936
Health Emergency Phone: 800-424-9300 (CHEMTREC)
Label Required IND: Y
Date Of Label Review: 02/14/1996
Status Code: C
Label Date: 02/14/1996
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Severe
Reactivity Hazard: None
Hazard And Precautions: FLAMMABLE. ACUTE:EYES & SKIN:MODERATE IRRITANT.
INHALATION:MAY IRRITATE RESPIRATORY TRACT CAUSING HEADACHES, NAUSEA,
DIZZINESS AND/OR NARCOSIS WHICH IS TYPICAL FOR SOLVENT BASE PRODUCTS.
CHRONIC:PROLO NGED OR REPEATED EXPOSURE TO POLYAMIDE RESINS MAY CAUSE ASTHMA
AND SKIN SENSITIZATION OR OTHER ALLERGIC RESPONSES. OVEREXPOSURE TO SOLVENTS
ABOVE THEIR TLV'S MAY CAUSE LIVER AND KIDNEY DISORDERS.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.