Search   
MSDS  : PR-2760, PART A
CAS  :
NAME  : *** proprietary ***
COURTAULDS AEROSPACE INC -- PR-2760, PART A
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CBFKL
MSDS NAME: PR-2760, PART A
Kit Part: Y
Responsible Party
Name: COURTAULDS AEROSPACE INC
Address: 5430 SAN FERNANDO RD
Box: 1800
City: GLENDALE CA 91209
Info Phone: 818-240-2060
Emergency Phone Number: 800-228-5635;800-424-9300(CHEMTREC)
Preparer's Name: SR
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: PRC-DESOTO INTERNATIONAL, INC. A PPG INDUSTRIES COMPANY
Address: 5430 SAN FERNANDO RD
Box: 1800
City: GLENDALE CA 91209
Phone: 818-240-2060
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYES:IRRITATION. SKIN:LOCAL IRRITATION.
INHALATION:RESPIRATORY TRACT IRRITATION. INGESTION:NONE KNOWN.
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYES:FLUSH WITH LUKE WARM WATER FOR AT LEAST 15 MINUTES. IF SYMPTOMS
PERSIST, CONSULT PHYSICIAN. SKIN:WASH WITH SOAP AND WATER. IF SYMPTOMS
PERSIST, CONSULT A PHYSICIAN. INHALATION:REMOVE TO FRESH AIR . IF SYMPTOMS
ARE PRESENT CONSULT A PHYSICIAN. INGESTION:CONSULT A PHYSICIAN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: COVER WITH ABSORBENT. SCOOP INTO CONTAINERS. CLEAN-UP
RESIDUE WITH DETERGENT AND WATER.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS (FP N). NOT A HAZARDOUS WASTE ACCORDING TO EPA REGULATIONS.
CONSULT STATE REGULATIONS PRIOR TO DISPOSAL OF SPILLAGE.
Handling And Storage Precautions: NONE.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: NOT FLAMMABLE
Lower Limits: NOT FLAM
Upper Limits: NOT FLAM
Extinguishing Media: CO*2 DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures: WEAR NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N). USE WATER TO COOL HEAT EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard: NONE KNOWN.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN (FP N).
Ventilation: GENERAL VENTILATION.
Protective Gloves: SOLVENT RESISTANT GLOVES.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: ANSI APPROVED EMERGENCY EYE WASH AND DELUGE SHOWER
(FP N).
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Physical/Chemical Properties
=======================================================
Spec Gravity: 1.5
Solubility in Water: APPRECIABLE
Appearance and Odor: WHITE LIQUID.
Percent Volatiles by Volume: NONE
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: STRONG ACIDS.
Hazardous Decomposition Products: OXIDES OF CARBON.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: PR-2760, PART A
Company: PRC-DESOTO INTERNATIONAL, INC. A PPG INDUSTRIES COMPANY
Street: 5430 SAN FERNANDO RD
PO Box: 1800
City: GLENDALE CA
Zipcode: 91209
Health Emergency Phone: 800-228-5635;800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 12/07/1995
Status Code: C
Label Date: 12/07/1995
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE:EYES:IRRITATION. SKIN:LOCAL IRRITATION.
INHALATION:RESPIRATORY TRACT IRRITATION. CHRONIC:NONE SPECIFIED BY
MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
3500-SERIES (PARTS A & B), KOLOR-POXY SELF- (SUPDAT)
COMPOUNDS AND ADHESIVES, 74100 25068-38-6
13983-17-0
112945-52-5
COMPOUNDS AND ADHESIVES, 74101 68410-23-1
13983-17-0
112945-52-5
FOIL-FAST EPOXY INJECTION GEL COMPONENT B-HARDENER
UNDERWATER REPAIR PUTTY RESIN, 11800 25068-38-6
UNDERWATER REPAIR PUTTY HARDENER, 11800
EPK 660 PART A VARIAN-TORRSEAL, AA0660 14808-60-7
25068-38-6
INTERPRIME ETCH GREEN BASE (5257), VTA528 71-36-3
67-63-0
7440-47-3
INTERPRIME CURING AGENT (5258), VTA529 67-63-0
7664-38-2
BONDSEAL, FE-1407-A
BONDSEAL, FE-1407-B
EPOXY CURING AGENT, FE-0086B
AVCOAT HIGH SOLIDS 595B-17925 WHITE, 466-21-7925 13463-67-7
108-10-1
108-88-3
78-93-3
111-76-2
112-07-2
112926-00-8
1344-28-1
71-36-3
HS EP CAT FOR 446-21, 22-SERIES, X-530 107-98-2
108-88-3
71-36-3
100-51-6
90-72-2
AVGUARD/PB FREE/COR.RES.EP., 463-06-0078 71-55-6
25036-25-3
14807-96-6
108-94-1
25068-38-6
14808-60-7
13463-67-7
7789-06-2
1309-37-1
CATALYST FOR 463-6-78, X-515 71-55-6
71-36-3
1760-24-3
90-72-2
QUARTZ-CRETE RESIN LIGHTWEIGHT 25085-99-8
QUARTZ-CRETE HARDENER LIGHTWEIGHT 9046-10-0
QUARTZ-CRETE RESIN PRIMER 25085-99-8
100-51-6
QUARTZ-CRETE HARDENER PRIMER 9046-10-0
25154-52-3
140-31-8
WELL-DONE, 0298
SYNTHETIC GEAR LUBRICANT TEGRA ISO220, CPS233917
405-01 SPOT REMOVER, LIFT OFF 1 FOOD BEVERAGE(SUPDAT)
CAP-STUN WEAPON SYSTEMS
100 PPM CARBON MONOXIDE, 0.35% PENTANE AND (SUPDAT) 630-08-0
109-66-0
7782-44-7
7727-37-9
SPRAY LUBRICANT 8008-20-6
8012-95-1
HYSOL EA 901NA/B-1 GAL SYSTEM PART A, AS9195018
PR-2760, PART A
CONCRESIVE STANDARD LIQUID, PART B
BLACK URETHANE SUB PART A, 13910
BLACK URETHANE SUB PART B, 13911
STRATA PLUS, 0540
DSX-GREASE (NON-SOLUBLE)
DSX-POLYOL-FLUOROPOLYMER LUBRICANT
DSX-CUTTER
DSX-ASSEMBLER
DSX-OIL
DSX-IMPACT
PODOPHYLLUM RESIN IN TINCUTRE BENZOIN 9000-55-9
H755 CLEANER 7664-41-7
DI-ALL MC-2 MILDEWCIDE (LATEX PAINT ADDITIVE) 137-30-4
155-04-4
BR-304 OLIGOMER
BACK TO NATURE I PAINT REMOVER 1305-62-0
1310-73-2
7722-88-5
PIPETITE PASTE 34590-94-8
ALGIMYCIN 400
CS-100 PART 1
CS-100 PART 2
TECHNI-PLUS ACS TOPCOAT RESIN PART 1
TECHNI-PLUS GT 3000 HARDENER
PRO LUBE

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net