AMERICAN INDUSTRIAL SUPPLY INC -- BLAST OUT, FRESH N CLEAN
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CBKPL
MSDS NAME: BLAST OUT, FRESH N CLEAN
Responsible Party
Name: AMERICAN INDUSTRIAL SUPPLY INC
Box: 10996
City: BURBANK CA 91510-0996
Info Phone: 818-841-7788
Emergency Phone Number: 818-841-7788
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: AMERICAN INDUSTRIAL SUPPLY INC
Address: 4514 VANOWEN ST.
Box: 10996
City: BURBANK CA 91506-0996
Phone: 800-366-0961/818-841-7788
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: EYES:IRRITATION AND REDNESS, BURNING SENSATION
SKIN & RESPIRATORY TRACT: IRRITATION AND BURNING SENSATION. CHRONIC:
PROLONGED EXPOSURE TO VAPORS OR MISTS CAUSE LUNG DISORDERS, LIVER OR KIDNEY
DAMAGE. PROLONGED SKIN CONTACT MAY CAUSE SEVERE BURNS.
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: SKIN:WASH AFFECTED AREAS W/H*2O WHILE REMOVING CONTAMD CLTHG. GET
IMMED MED ATTN, LAUNDER CONTAMD CLTHG BEFORE REUSE. EYES:FLUSH EYES
W/CONTIOUS AMTS OF H*2O FOR AT LEAST 15 MIN. GET IMMED MED ATTN. I NGEST:DO
NOT INDUCE VOMIT. DILUTE W/H*2O/MILK & CALL MD IMMED. NEVER GIVE
FLUIDS/INDUCE VOMIT IF VICTIM IS UNCON/HAVING CONVLS. INHAL:MOVE TO FRESH
AIR. AID IN BRTHS, IF NEC, & GET IMMED MED ATTN.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: CONTAIN, SWEEP-UP, FLUSH WITH WATER, DISPOSE.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: PER LOCAL, STATE AND FEDERAL REGULATIONS.
Handling And Storage Precautions: PER LOCAL, STATE AND FEDERAL REGULATIONS.
Other Precautions: CLEAN CLOTHING SHOULD BE WORN DALLY.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: NON-COMBUSTIBLE. MEDIA SUITABLE FOR SURROUNDING FIRE (FP
N).
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: IN WATER SOLUTION, CAUSTIC CAN REACT WITH
AMPHOTERIC METALS GENERATING HYDROGEN WHICH IS EXPLOSIVE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH/MSHA APPROVED ORGANIC VAPOR MILD-GAS RESPIRATOR
WHEN VAPORS ARE GENERATED ABOVE THE PERMISSIBLE LIMIT.
Ventilation: LOCAL EXHAUST TO CONTROL TO RECOMMENDED P.E.L.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: COVERALLS, APRONS, BOOTS AS NECESSARY TO PREVENT
SKIN CONTACT.
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: >212F,>100C
Spec Gravity: 70 LBS/CU.FT
PH: >12
Solubility in Water: COMPLETE
Appearance and Odor: WHITE SOLID; TYPICAL ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: KEEP CONTAINER CLOSED.
Materials To Avoid: WATER AND ACID. CORROSIVE METAL: ALUMINUM, TIN, ZINC,
BRONZE AND BRASS.
Hazardous Decomposition Products: NONE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: LABEL COVERED UNDER EPA REGS - HAZCOM LABEL NOT AUTHORIZED
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.