HIGH STANDARD PRODUCTS CORPORA -- A-013 DL AMPHETAMINE-D11 STANDARD, 0.1 MG/ML
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CCZVH
MSDS NAME: A-013 DL AMPHETAMINE-D11 STANDARD, 0.1 MG/ML IN METHANOL
Responsible Party
Name: HIGH STANDARD PRODUCTS CORPORATION
Address: 1100 WEST FLORENCE AVENUE B
City: INGLEWOOD CA 90301-5000
Info Phone: 310-670-3731
Emergency Phone Number: 310-670-3731
Preparer's Name: RAYMOND SCHEP
Review Ind: Y
Published: Y
=======================================================
Preparer Co. when other than Responsible Party Co.
=======================================================
Assigned Ind: Y
Name: HIGH STANDARD PRODUCTS CORPORATION
Address: 1100 WEST FLORENCE AVENUE B
City: INGLEWOOD CA 90301-5000
=======================================================
Contractor Summary
=======================================================
Name: HIGH STANDARD PRODUCTS CORPORATION
Address: 1100 WEST FLORENCE AVENUE B
City: INGLEWOOD CA 90301-5000
Phone: 310-670-3731
=======================================================
Ingredients
=======================================================
Cas: 67-56-1
RTECS #: PC1400000
Name: METHANOL (METHYL ALCOHOL), COLUMBIAN SPIRITS *96-3*
% Wt: 99.9
Other REC Limits: 200 PPM
OSHA PEL: 200 PPM
ACGIH TLV: 200 PPM
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
------------------------------
Cas: 300-62-9
RTECS #: SH9450000
Name: DL-AMPHETAMINE *96-3*
% Wt: 0.01
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: METHANOL: TOXIC BY INGESTION, INHALATION & SKIN
ABSORPTION. MAY CAUSE ACIDOSIS, BLINDNESS & DEATH. MOST FATALITIES OCCUR
W/INGESTION OF AMOUNTS IN EXCESS OF 100 ML AS LITTLE AS 30 ML HAS BEEN FATAL.
Explanation Of Carcinogenicity: NONE
Signs And Symptions Of Overexposure: METHANOL: ABDONIMAL PAIN, BLURRED VISION,
COMA
First Aid: METHANOL: GIVE CPR IF BREATHING IS DISTURBED. SKIN: IMMEDIATELY WASH
OFF W/LARGE AMOUNTS OF WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: LARGE: USE RESPIRATOR FOR ORGANIC VAPORS DURING
CLEAN-UP. REMOVE IGNITION SOURCES & WEAR PLASTIC APRON,/GLOVES &
SAFETY GLASSES TO PICK UP METHANOL W/ABSORBENT PAPER & DISPOSE OF IN A
WELL VENTILATED AREA. USE WATER TO PICK UP REMAINING LIQUID.
Waste Disposal Methods: SMALL QUANTITIES OF METHANOL CAN BE DISPOSED OF BY
DILUTION W/TAP WATER. DISPOSE OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL
REGULATIONS.
Handling And Storage Precautions: STORE IN THE DARK, PREFERABLY AT 32F.
Other Precautions: TRAIN INEXPERIENCED PERSONNEL PROPERLY PRIOR TO HANDLING
THIS MATERIAL.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: 51.8F
Lower Limits: 6
Upper Limits: 36.5
Extinguishing Media: DRY CHEMICAL, CO2/HALON
Unusual Fire/Explosion Hazard: FLAMMABLE SOLVENT W/TOXIC VAPOR. FLASHBACK ALONG
VAPOR TRAIL POSSIBLE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE A FUNCTIONING FUME HOOD/A RESPIRATOR W/ORGANIC
VAPOR CARTRIDGES.
Ventilation: SMALL AMOUNTS: <100 ML, USE W/FORCED AIR VENTILATION/A LARGE
VENTILATED ROOM/LABORATORY.
Protective Gloves: POLYVINYL CHLORINE, NEOPRENE/LATEX
Eye Protection: SAFETY GLASSES
Other Protective Equipment: PLASTIC APRON/GLOVES
Supplemental Safety and Health: DATA INFORMATION IS FOR: METHANOL.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: 148.28F
M.P/F.P Text: -144.4F
Vapor Pres: 97
Vapor Density: 1.11
Spec Gravity: 0.793
Evaporation Rate & Reference: (BUTYL ACETATE=1): 5.9
Solubility in Water: MISCIBLE
Appearance and Odor: CLEAR COLORLESS LIQUID, ODOR
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HEAT, SPARKS, SOURCES OF IGNITION
Materials To Avoid: ACIDS, ACID CHLORIDES, ACID ANHYDRIDES, OXIDIZING AGENTS,
REDUCING AGENTS, ALKALI METALS
Hazardous Decomposition Products: CO, CO2, NITROGEN OXIDES, METHANOL VAPOR
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: A-013 DL AMPHETAMINE-D11 STANDARD, 0.1 MG/ML IN METHANOL
Assigned IND: Y
Company: HIGH STANDARD PRODUCTS CORPORATION
Street: 1100 WEST FLORENCE AVENUE B
City: INGLEWOOD CA
Zipcode: 90301-5000
Health Emergency Phone: 310-670-3731
Label Required IND: Y
Date Of Label Review: 10/12/1999
Status Code: A
Origination Code: G
Hazard And Precautions: METHANOL: TOXIC BY INGESTION, INHALATION & SKIN
ABSORPTION. MAY CAUSE ACIDOSIS, BLINDNESS & DEATH. MOST FATALITIES OCCUR
W/INGESTION OF AMOUNTS IN EXCESS OF 100 ML AS LITTLE AS 30 ML HAS BEEN FATAL.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|