LUBRICATION TECHNOLOGIES INC -- HYPRO PUMP OIL SAE 30
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CDBJQ
MSDS NAME: HYPRO PUMP OIL SAE 30
Responsible Party
Name: LUBRICATION TECHNOLOGIES INC
Address: 900 MENDELSSOHN AVENUE
City: GOLDEN VALLEY MN 55427-5000
Info Phone: 800-328-5573
Emergency Phone Number: 612-545-0707
Proprietary Ind: Y
Review Ind: Y
Published: Y
=======================================================
Preparer Co. when other than Responsible Party Co.
=======================================================
Name: LUBRICATION TECHNOLOGY INC
Address: 310 MORTON ST
City: JACKSON OH 45640
=======================================================
Contractor Summary
=======================================================
Name: LUBRICATION TECHNOLOGIES INC
Address: UNKNOWN
Box: UNKNOW
City: UNKNOWN NK 00000
Phone: UNKNOWN
Name: LUBRICATION TECHNOLOGY INC
Address: 310 MORTON ST
City: JACKSON OH 45640
Phone: 740-286-2644
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: PROLONGED/REPEATED EXPOSURE TO SKIN MAY CAUSE IRRITATION.
Explanation Of Carcinogenicity: NONE
Signs And Symptions Of Overexposure: IRRITATION.
Medical Cond Aggravated By Exposure: PROLONGED/REPEATED SKIN CONTACT.
First Aid: EYES: FLUSH W/WATER. SKIN: WASH THOROUGHLY W/SOAP & WATER.
OBTAIN MEDICAL ATTENTION IN ALL CASES.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: DON'T ALLOW MATERIAL TO ENTER SEWER/WATERWAYS.
COLLECT ON ABSORBENT MATERIAL & TRANSFER TO STEEL CONTAINERS.
Waste Disposal Methods: DISPOSE OF IAW/FEDERAL, STATE & LOCAL REGULATIONS.
Handling And Storage Precautions: STORE IN COOL, DRY AREA AWAY FROM IGNITION
SOURCES. KEEP CONTAINERS SEALED WHEN NOT IN USE.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: COC
Flash Point Text: >380F
Extinguishing Media: DRY CHEMICAL, FOAM, CO2, WATERFOG.
Fire Fighting Procedures: DON'T USE WATER, EXCEPT AS FOG.
Unusual Fire/Explosion Hazard: EMPTY DRUMS MAY CONTAIN EXPLOSIVE VAPORS. DON'T
CUT, WELD, SOLDER/FILE DRUMS.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NOT NEEDED
Ventilation: LOCAL EXHAUST
Protective Gloves: OIL PROOF
Eye Protection: CHEMICAL SAFETY GOGGLES
Other Protective Equipment: NONE
Work Hygienic Practices: REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
DISCARD OIL SOAKED SHOES.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: >625F
M.P/F.P Text: LIQUID
Vapor Pres: 0
Spec Gravity: 0.88
Evaporation Rate & Reference: (BU AC =1): 0
Solubility in Water: NEGLIGIBLE
Appearance and Odor: CLEAR, GREEN LIQUID W/PETROLEUM ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Materials To Avoid: STRONG OXIDIZERS, HYDROGEN PEROXIDE, BROMINE, CHROMIC ACID.
Hazardous Decomposition Products: CO, CO2 FROM BURNING OXIDES OF PHOSPHOROUS,
OXIDES OF SULFUR.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: HYPRO PUMP OIL SAE 30
Company: LUBRICATION TECHNOLOGY INC
Street: 310 MORTON ST
City: JACKSON OH
Zipcode: 45640
Health Emergency Phone: 612-545-0707
Label Required IND: Y
Date Of Label Review: 10/12/1999
Status Code: A
Origination Code: G
Hazard And Precautions: PROLONGED/REPEATED EXPOSURE TO SKIN MAY CAUSE
IRRITATION.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.