MSDS   | : | QUICK SET EPOXY RESIN | CAS   | : | 1302-78-9 1317-65-3 25068-38-6 2530-83-8 1333-86-4 | NAME   | : | aluminum silicate, bentonite, montmorillonite, clay calcium carbonate, domolite, limestone, whiting *96-4* bisphenol a diglycidyl ether resin, epoxy resin, epon 820, araldite glycidoxypropyltrimethoxysilane, silane, 3-(2,3-epoxypropoxy) columbia carbon, carbon black, lampblack, black pearls (iarc carc volatile organic content: 0 gms/l
|
| |
|
|
HILTI INC -- QUICK SET EPOXY RESIN
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CDRMS
MSDS NAME: QUICK SET EPOXY RESIN
Kit Part: Y
Responsible Party
Name: HILTI INC
Address: 5400 S 122ND EAST AVENUE
Box: 21148
City: TULSA OK 74121-5000
Info Phone: 918-252-6000/800-879-4444
Emergency Phone Number: 918-252-6000/800-879-4444
Review Ind: Y
Published: Y
=======================================================
Preparer Co. when other than Responsible Party Co.
=======================================================
Assigned Ind: Y
Name: HILTI INC
Address: 5400 S 122ND EAST AVE
Box: 21148
City: TULSA OK 74121
=======================================================
Contractor Summary
=======================================================
Name: HILTI INC
Address: 5400 S 122ND E AVE
Box: 21148
City: TULSA OK 74121
Phone: 918-252-6000/800--879-6000
Name: HILTI INC
Address: 5400 S 122ND EAST AVE
Box: 21148
City: TULSA OK 74121
Phone: 918-252-6000/800-879-6000
=======================================================
Ingredients
=======================================================
Cas: 1302-78-9
RTECS #: CT9450000
Name: ALUMINUM SILICATE, BENTONITE, MONTMORILLONITE, CLAY
ACGIH TLV: 10 MG/CUM (DUST)
------------------------------
Cas: 1317-65-3
RTECS #: EV9580000
Name: CALCIUM CARBONATE, DOMOLITE, LIMESTONE, WHITING *96-4*
Other REC Limits: 5 MG/M3 RESP DUST
OSHA PEL: 15 MG/M3
ACGIH TLV: 10 MG/CUM TOTAL DUST
------------------------------
Cas: 25068-38-6
RTECS #: KD4380000
Name: BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN, EPON 820, ARALDITE
6004, AMINE ADDUCT, ARALDITE GY250 *96-4*
------------------------------
Cas: 2530-83-8
RTECS #: VV4025000
Name: GLYCIDOXYPROPYLTRIMETHOXYSILANE, SILANE, 3-(2,3-EPOXYPROPOXY)
PROPYLTRIMETHOXY-
------------------------------
Cas: 1333-86-4
RTECS #: FF5800000
Name: COLUMBIA CARBON, CARBON BLACK, LAMPBLACK, BLACK PEARLS (IARC CARC
GROUP 3) - *96-4*
Other REC Limits: 3.5 MG/CUM (NIOSH)
OSHA PEL: 3.5 MG/CUM
ACGIH TLV: 3.5 MG/CUM
------------------------------
RTECS #: 9999999VO
Name: VOLATILE ORGANIC CONTENT: 0 GMS/L
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: NO
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: MAY CAUSE EYE & SKIN IRRITATION. MAY ALSO CAUSE
SENTSITIZATION.
Explanation Of Carcinogenicity: NONE
Signs And Symptions Of Overexposure: IRRITATION, ALLERGIC SKIN REACTIONS IN
SUSCEPTIBLE INDIVIDUALS.
Medical Cond Aggravated By Exposure: EYE, SKIN & RESPIRATORY CONDITIONS.
First Aid: EYES: IMMEDIATELY FLUSH W/PLENTY OF WATER. SKIN: WASH W/SOAP &
WATER. INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN &/CPR IF NEEDED.
INGESTION: IF CONSCIOUS, GIVE PLENTY OF WATER TO DRINK. DON'T INDUCE
VOMITING UNLESS DIRECTED TO BY A PHYSICIAN. NEVER GIVE ANYTHING BY MOUTH TO
AN UNCONSCIOUS PERSON. OBTAIN MEDICAL ATTENTION IN ALL CASES.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE W/AN ABSORBENT MATERIAL.
Waste Disposal Methods: DISPOSE OF IAW/FEDERAL, STATE & LOCAL REGULATIONS.
Handling And Storage Precautions: STORE IN A COOL, DRY PLACE. USE W/ADEQUATE
VENTILATION. AVOID PROLONGED/REPEATED CONTACT W/SKIN.
Other Precautions: NEVER ENTER A CONFINED SPACE W/OUT AN APPROPRIATE
AIR-SUPPLIED RESPIRATOR SUCH AS A SCBA/AIRLINE W/ESCAPE PACK.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point Text: 277F
Extinguishing Media: CO2, DRY CHEMICAL, FOAM, WATER.
Fire Fighting Procedures: WEAR A SCBA.
Unusual Fire/Explosion Hazard: THERMAL DECOMPOSITION & COMBUSTION PRODUCTS
CAN BE FORMED.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NONE NORMALLY REQUIRED. WEAR A NIOSH APPROVED ORGANIC
VAPOR CARTRIDGE RESPIRATOR WHEN AIR MOVEMENT IS INADEQUATE TO CONTROL VAPORS.
Ventilation: NATURAL/MECHANICALLY INDUCED FRESH AIR MOVEMENTS THAT MAINTAIN
VAPOR CONCENTRATIONS <RECOMMENDED EXPOSURE LIMITS.
Protective Gloves: COTTON/IMPERMEABLE
Eye Protection: SPLASH-PROOF CHEMICAL GOGGLES
Work Hygienic Practices: REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
WASH THOROUGHLY AFTER HANDLING.
=======================================================
Physical/Chemical Properties
=======================================================
Spec Gravity: 1.43-1.53
Solubility in Water: INSOLUBLE
Appearance and Odor: BLACK PASTE W/MILD ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: EXCESSIVE HEAT FOR PROLONGED PERIODS OF TIME.
Materials To Avoid: STRONG OXIDIZERS, ACIDS & BASES.
Hazardous Decomposition Products: THERMAL DECOMPOSITION: CO & CO2.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: QUICK SET EPOXY RESIN
Assigned IND: Y
Company: HILTI INC
Street: 5400 S 122ND EAST AVE
PO Box: 21148
City: TULSA OK
Zipcode: 74121
Health Emergency Phone: 918-252-6000/800-879-4444
Label Required IND: Y
Date Of Label Review: 10/12/1999
Status Code: A
Origination Code: G
Hazard And Precautions: MAY CAUSE EYE & SKIN IRRITATION. MAY ALSO CAUSE
SENTSITIZATION.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|