MSDS   | : | RM 698 RAPID PRIMER - HARDENER | CAS   | : | 68683-29-4 56-18-8 80-05-7 68610-56-0 111-40-0 108-46-3 3236-53-1 3236-54-2 90-72-2 280-57-9 25265-71-8 100-51-6 | NAME   | : | 2-propenenitrile, polymer with 1,3-propanediamine, n-(3-aminopropyl) bisphenol a, bisphenol; 2,2-bis-4'-hydroxylpropan *96-4* bisphenol a,epichlorohydrin, diethylenetriamine adduct diethylenetriamine, ethylenediamine, n-(2-aminoethyl); resorcinol, m-dihydroxybenzene 1,6-hexanediamine, 2,2,4-trimethyl 2,4,4-trimethyl-1,6-hexanediamine *96-4* 2,4,6-tri(dimethylaminomethyl)phenol, dmp-30 triethylenediamine dipropylene glycol volatile organic content: 67 gms/l benzyl alcohol
|
| |
|
|
HILTI INC -- RM 698 RAPID PRIMER - HARDENER
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CDRMW
MSDS NAME: RM 698 RAPID PRIMER - HARDENER
Kit Part: Y
Responsible Party
Name: HILTI INC
Address: 5400 S 122ND EAST AVENUE
Box: 21148
City: TULSA OK 74121-5000
Info Phone: 918-252-6000/800-879-4444
Emergency Phone Number: 918-252-6000/800-879-4444
Review Ind: Y
Published: Y
=======================================================
Preparer Co. when other than Responsible Party Co.
=======================================================
Assigned Ind: Y
Name: HILTI INC
Address: 5400 S 122ND EAST AVE
Box: 21148
City: TULSA OK 74121
=======================================================
Contractor Summary
=======================================================
Name: HILTI INC
Address: 5400 S 122ND E AVE
Box: 21148
City: TULSA OK 74121
Phone: 918-252-6000/800--879-6000
Name: HILTI INC
Address: 5400 S 122ND EAST AVE
Box: 21148
City: TULSA OK 74121
Phone: 918-252-6000/800-879-6000
=======================================================
Ingredients
=======================================================
Cas: 68683-29-4
Name: 2-PROPENENITRILE, POLYMER WITH
1,3-BUTADIENE,1-CYANO-1-METHYL-4-OXO-4((2-(1-PIPERAZINYL)ETHYL)AMINO)BUTYL-TE
RMINATED
------------------------------
Cas: 56-18-8
RTECS #: JL9450000
Name: 1,3-PROPANEDIAMINE, N-(3-AMINOPROPYL)
-----------------------------
Cas: 80-05-7
RTECS #: SL6300000
Name: BISPHENOL A, BISPHENOL; 2,2-BIS-4'-HYDROXYLPROPAN *96-4*
------------------------------
Cas: 68610-56-0
Name: BISPHENOL A,EPICHLOROHYDRIN, DIETHYLENETRIAMINE ADDUCT
*96-4*
------------------------------
Cas: 111-40-0
RTECS #: IE1225000
Name: DIETHYLENETRIAMINE, ETHYLENEDIAMINE, N-(2-AMINOETHYL);
BIS(2-AMINOETHYL)AMINE *96-4*
Other REC Limits: 4 MG/CUM
OSHA PEL: 1 PPM
ACGIH TLV: 1 PPM (SKIN)
------------------------------
Cas: 108-46-3
RTECS #: UG9625000
Name: RESORCINOL, M-DIHYDROXYBENZENE
Other REC Limits: 10 PPM
OSHA PEL: 10 PPM
ACGIH TLV: 10 PPM
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
------------------------------
Cas: 3236-53-1
Name: 1,6-HEXANEDIAMINE, 2,2,4-TRIMETHYL
------------------------------
Cas: 3236-54-2
Name: 2,4,4-TRIMETHYL-1,6-HEXANEDIAMINE *96-4*
------------------------------
Cas: 90-72-2
RTECS #: SN3500000
Name: 2,4,6-TRI(DIMETHYLAMINOMETHYL)PHENOL, DMP-30
------------------------------
Cas: 280-57-9
RTECS #: HM0354200
Name: TRIETHYLENEDIAMINE
------------------------------
Cas: 25265-71-8
RTECS #: UB8765000
Name: DIPROPYLENE GLYCOL
------------------------------
RTECS #: 9999999VO
Name: VOLATILE ORGANIC CONTENT: 67 GMS/L
-----------------------------
Cas: 100-51-6
RTECS #: DN3150000
Name: BENZYL ALCOHOL
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: NO
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: CORROSIVE. CAN BE ABSORBED THROUGH SKIN. MAY CAUSE
SENSITIZATION. MAY CAUSE EYE & SKIN BURNS.
Explanation Of Carcinogenicity: NONE
Signs And Symptions Of Overexposure: BURNS, ALLERGIC SKIN REACTIONS IN
SUSCEPTIBLE INDIVIDUALS, NAUSEA, VOMITING/SIMILAR SIGNS OF ILLNESS.
Medical Cond Aggravated By Exposure: EYE, SKIN & RESPIRATORY CONDITIONS.
First Aid: EYES: IMMEDIATELY FLUSH W/WATER FOR 15 MINS. SKIN: IMMEDIATELY WASH
W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN &/CPR IF
NEEDED. INGESTION: IF CONSCIOUS, GIVE PLENTY OF WATER TO DRINK . DON'T INDUCE
VOMITING UNLESS DIRECTEDTO BY A PHYSICIAN. NEVER GIVE ANYTHING BY MOUTH TO AN
UNCONSCIOUS PERSON. OBTAIN MEDICAL ATTENTION IN ALL CASES.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE W/AN ABSORBENT MATERIAL.
Waste Disposal Methods: DISPOSE OF IAW/FEDERAL, STATE & LOCAL REGULATIONS.
Handling And Storage Precautions: KEEP FROM FREEZING. KEEP CONTAINER CLOSED
WHEN NOT IN USE. USE W/ADEQUATE VENTILATION. AVOID EYE & SKIN CONTACT.
Other Precautions: NEVER ENTER A CONFINED SPACE W/OUT AN APPROPRIATE
AIR-SUPPLIED RESPIRATOR SUCH AS A SCBA/AIRLINE W/ESCAPE PACK.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: >200F
Extinguishing Media: CO2, DRY CHEMICAL, FOAM, WATER.
Fire Fighting Procedures: WEAR A SCBA.
Unusual Fire/Explosion Hazard: THERMAL DECOMPOSITION & COMBUSTION PRODUCTS
CAN BE FORMED.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NOT NORMALLY REQUIRED. WEAR A NIOSH APPROVED ORGANIC
VAPOR CARTRIDGE RESPIRATOR WHEN AIR MOVEMENT IS INADEQUATE TO CONTROL VAPORS.
Ventilation: NATURAL/MECHANICALLY INDUCED FRESH AIR MOVEMENTS.
Protective Gloves: IMPERMEABLE
Eye Protection: REQUIRED
Other Protective Equipment: SPLASH-PROOF CHEMICAL GOGGLES WHILE MIXING PRODUCT,
FULL FACE-SHIELD RECOMMENDED
Work Hygienic Practices: REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
WASH THOROUGHLY AFTER HANDLING.
=======================================================
Physical/Chemical Properties
=======================================================
Solubility in Water: SLIGHT
Appearance and Odor: CLEAR AMBER LIQUID W/AMMONIA-LIKE ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: EXCESSIVE HEAT FOR PROLONGED PERIODS OF TIME,
FREEZING.
Materials To Avoid: OXIDIZING ACIDS, LEWIS ACIDS, METAL ORGANICS, NATURAL
RUBBER.
Hazardous Decomposition Products: THERMAL DECOMPOSITION: CO & CO2.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: RM 698 RAPID PRIMER - HARDENER
Assigned IND: Y
Company: HILTI INC
Street: 5400 S 122ND EAST AVE
PO Box: 21148
City: TULSA OK
Zipcode: 74121
Health Emergency Phone: 918-252-6000/800-879-4444
Label Required IND: Y
Date Of Label Review: 10/12/1999
Status Code: A
Origination Code: G
Hazard And Precautions: CORROSIVE. CAN BE ABSORBED THROUGH SKIN. MAY CAUSE
SENSITIZATION. MAY CAUSE EYE & SKIN BURNS.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|