MSDS   | : | HSE 2411 AMINE HARDENER FOR HIGH STRENGTH EPOXY RESIN | CAS   | : | 80-05-7 108-46-3 56-18-8 90-72-2 102-71-6 111-40-0 112-24-3 7727-43-7 15520-10-2 25265-71-8 26950-63-0 67762-90-7 68410-23-1 68610-56-0 68683-29-4 | NAME   | : | bisphenol a, bisphenol; 2,2-bis-4'-hydroxylpropan *96-4* resorcinol, m-dihydroxybenzene 1,3-propanediamine, n-(3-aminopropyl) 2,4,6-tri(dimethylaminomethyl)phenol, dmp-30 triethanolamine *96-4* diethylenetriamine, ethylenediamine, n-(2-aminoethyl); triethylenetetramine, epoxy hardner barium sulfate, barytes *96-4* 2-methylpentamethylenediamine *96-4* dipropylene glycol triethylene tetramine polymer w/methyl oxirane *96-4* catalyst amorphous silica, di-me siloxanes & silicones *96-4* polyamide of c18 fatty acid primers & teta; polyamide resin bisphenol a,epichlorohydrin, diethylenetriamine adduct 2-propenenitrile, polymer with volatile organic content: 404.3 gms/l
|
| |
|
|
HILTI INC -- HSE 2411 AMINE HARDENER FOR HIGH STRENGTH EPO
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CDRMP
MSDS NAME: HSE 2411 AMINE HARDENER FOR HIGH STRENGTH EPOXY RESIN
Kit Part: Y
Responsible Party
Name: HILTI INC
Address: 5400 S 122ND EAST AVENUE
Box: 21148
City: TULSA OK 74121-5000
Info Phone: 918-252-6000/800-879-4444
Emergency Phone Number: 918-252-6000/800-879-4444
Review Ind: Y
Published: Y
=======================================================
Preparer Co. when other than Responsible Party Co.
=======================================================
Assigned Ind: Y
Name: HILTI INC
Address: 5400 S 122ND EAST AVE
Box: 21148
City: TULSA OK 74121
=======================================================
Contractor Summary
=======================================================
Name: HILTI INC
Address: 5400 S 122ND E AVE
Box: 21148
City: TULSA OK 74121
Phone: 918-252-6000/800--879-6000
Name: HILTI INC
Address: 5400 S 122ND EAST AVE
Box: 21148
City: TULSA OK 74121
Phone: 918-252-6000/800-879-6000
=======================================================
Ingredients
=======================================================
Cas: 80-05-7
RTECS #: SL6300000
Name: BISPHENOL A, BISPHENOL; 2,2-BIS-4'-HYDROXYLPROPAN *96-4*
------------------------------
Cas: 108-46-3
RTECS #: UG9625000
Name: RESORCINOL, M-DIHYDROXYBENZENE
Other REC Limits: 10 PPM
OSHA PEL: 10 PPM
ACGIH TLV: 10 PPM
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
------------------------------
Cas: 56-18-8
RTECS #: JL9450000
Name: 1,3-PROPANEDIAMINE, N-(3-AMINOPROPYL)
-----------------------------
Cas: 90-72-2
RTECS #: SN3500000
Name: 2,4,6-TRI(DIMETHYLAMINOMETHYL)PHENOL, DMP-30
ACGIH TLV: 5 PPM
------------------------------
Cas: 102-71-6
RTECS #: KL9275000
Name: TRIETHANOLAMINE *96-4*
Other REC Limits: A2 CARCINOGEN
ACGIH TLV: 3.1 MG/CUM IC
------------------------------
Cas: 111-40-0
RTECS #: IE1225000
Name: DIETHYLENETRIAMINE, ETHYLENEDIAMINE, N-(2-AMINOETHYL);
BIS(2-AMINOETHYL)AMINE *96-4*
Other REC Limits: 4 MG/CUM
ACGIH TLV: 1 PPM (SKIN)
------------------------------
Cas: 112-24-3
RTECS #: YE6650000
Name: TRIETHYLENETETRAMINE, EPOXY HARDNER
------------------------------
Cas: 7727-43-7
RTECS #: CR0600000
Name: BARIUM SULFATE, BARYTES *96-4*
OSHA PEL: 10 MG/CUM
ACGIH TLV: 10 MG/CUM
------------------------------
Cas: 15520-10-2
RTECS #: SA0248500
Name: 2-METHYLPENTAMETHYLENEDIAMINE *96-4*
-----------------------------
Cas: 25265-71-8
RTECS #: UB8765000
Name: DIPROPYLENE GLYCOL
------------------------------
Cas: 26950-63-0
Name: TRIETHYLENE TETRAMINE POLYMER W/METHYL OXIRANE *96-4*
------------------------------
Cas: 67762-90-7
Name: CATALYST AMORPHOUS SILICA, DI-ME SILOXANES & SILICONES *96-4*
------------------------------
Cas: 68410-23-1
Name: POLYAMIDE OF C18 FATTY ACID PRIMERS & TETA; POLYAMIDE RESIN
*96-4*
------------------------------
Cas: 68610-56-0
Name: BISPHENOL A,EPICHLOROHYDRIN, DIETHYLENETRIAMINE ADDUCT
*96-4*
------------------------------
Cas: 68683-29-4
Name: 2-PROPENENITRILE, POLYMER WITH
1,3-BUTADIENE,1-CYANO-1-METHYL-4-OXO-4((2-(1-PIPERAZINYL)ETHYL)AMINO)BUTYL-TE
RMINATED
------------------------------
RTECS #: 9999999VO
Name: VOLATILE ORGANIC CONTENT: 404.3 GMS/L
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: CORROSIVE. MAY CAUSE SKIN & EYE BURNS.
Explanation Of Carcinogenicity: NONE
Signs And Symptions Of Overexposure: BURNS.
Medical Cond Aggravated By Exposure: EYE, SKIN & RESPIRATORY CONDITIONS.
First Aid: EYES: IMMEDIATELY FLUSH W/PLENTY OF WATER FOR 15 MINS. SKIN:
IMMEDIATELY WASH W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. GIVE
OXYGEN &/CPR IF NEEDED. INGESTION: GIVE PLENTY OF WATER TO DRINK. NE VER
GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. DON'T INDUCE VOMITING UNLESS
DIRECTED TO BY A PHYSICIAN. OBTAIN MEDICAL ATTENTION IN ALL CASES.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: COVER W/ABSORBENT MATERIAL & PLACE IN A SALVAGE
CONTAINER FOR PROPER DISPOSAL.
Waste Disposal Methods: DISPOSE OF IAW/FEDERAL, STATE & LOCAL REGULATIONS.
Handling And Storage Precautions: KEEP IN A COOL DRY PLACE OUT OF DIRECT
SUNLIGHT. STORE BETWEEN 41-77F. KEEP FROM FREEZING. USE W/ADEQUATE
VENTILATION.
Other Precautions: AVOID CONTACT W/EYES, SKIN & CLOTHING. AVOID BREATHING
VAPORS. NEVER ENTER A CONFINED SPACE W/OUT AN APPROPRIATE AIR-SUPPLIED
RESPIRATOR SUCH AS A SCBA/AIRLINE W/ESCAPE PACK.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point Text: >200F
Extinguishing Media: CO2, DRY CHEMICAL, FOAM, WATER.
Fire Fighting Procedures: SOAK CARTONS TO HELP PREVENT SPREAD OF FIRE. WEAR A
SCBA.
Unusual Fire/Explosion Hazard: THERMAL DECOMPOSITION PRODUCTS CAN BE FORMED.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NONE NORMALLY REQUIRED. WEAR A NIOSH APPROVED ORGANIC
VAPOR RESPIRATOR WHEN VAPOR CONCENTRATIONS EXCEED RECOMMENDED EXPOSURE
LIMITS.
Ventilation: NATURAL/MECHANICALLY INDUCED FRESH AIR MOVEMENTS THAT MAINTAIN
VAPOR CONCENTRATIONS <RECOMMENDED EXPOSURE LIMITS.
Protective Gloves: CLOTH/NEOPRENE/RUBBER
Eye Protection: SAFETY GLASSES W/SIDE SHIELDS
Work Hygienic Practices: REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
WASH THOROUGHLY AFTER HANDLING.
=======================================================
Physical/Chemical Properties
=======================================================
Spec Gravity: 1.45
Solubility in Water: MODERATE
Appearance and Odor: BLACK PASTE W/AMINE ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: EXCESSIVE HEAT, DIRECT SUNLIGHT, FREEZING.
Materials To Avoid: STRONG ACIDS, PEROXIDES & OTHER OXIDIZING AGENTS.
Hazardous Decomposition Products: THERMAL DECOMPOSITION: CO & CO2.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: HSE 2411 AMINE HARDENER FOR HIGH STRENGTH EPOXY RESIN
Assigned IND: Y
Company: HILTI INC
Street: 5400 S 122ND EAST AVE
PO Box: 21148
City: TULSA OK
Zipcode: 74121
Health Emergency Phone: 918-252-6000/800-879-4444
Label Required IND: Y
Date Of Label Review: 10/12/1999
Status Code: A
Origination Code: G
Hazard And Precautions: CORROSIVE. MAY CAUSE SKIN & EYE BURNS.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|