3M GENERAL OFFICES -- SCOTCHWELD 2216 B/A GRAY EPOXY ADHESIVE PART
=======================================================
Material Safety Data Sheet
=======================================================
NIIN: 01-311-6475
MSDS Num: CFQYT
MSDS NAME: SCOTCHWELD 2216 B/A GRAY EPOXY ADHESIVE PART B
Kit Part: Y
Responsible Party
Name: 3M GENERAL OFFICES
Address: 3M CENTER
City: ST PAUL MN 55144-1000
Info Phone: 612-733-1110
Emergency Phone Number: 612-733-1110
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: MINNESOTA MINING AND MFG CO, DBA 3M
Address: 3M CENTER BLDG 224-5S-04
City: SAINT PAUL MN 55144-1000
Phone: 866-556 5712 / 612-733-1110
Name: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Address: 3M CTR
City: SAINT PAUL MN 55144-1000
Phone: 612-737-4114
=======================================================
Item Description Information
=======================================================
=======================================================
Ingredients
=======================================================
Cas: 25068-38-6
RTECS #: KC2100000
Name: EPOXY RESIN
% Wt: 70-80
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 1332-58-7
RTECS #: GF1670500
Name: CLAY (KAOLIN); (KAOLIN)
% Wt: 20-30
OSHA PEL: 15 MG/M3 TDUST
ACGIH TLV: 2 MG/M3 TDUST
------------------------------
Name: SUP DAT: FUMES & VAPS OF VARIABLE COMPOSITION BASED ON SPECIFIC
PROCESS CNDTNS. THESE PROCESS RELEASES MAY PRDCE
-----------------------------
Name: ING 4: IRRIT/ANY OF HLTH EFTS LISTED ABOVE WHEN EMISSIONS ARE PRESENT AT
ELEVATED CONCS. USE W/APPROP LOC EXHST VENT.
-----------------------------
Name: VENT: OR TO SUITABLE EMISSION CTL DEVICE. USE IN WELL-VENTILATED AREA. IF
EXHST VENT IS NOT ADEQ, USE APPROP RESP PROT.
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: MOD EYE IRRIT INCL REDNESS, SWELL, PAIN, TEARING,
& HAZY VISION. VAPS FROM HEATED MATL MAY CAUSE EYE IRRIT. DUST CREATED BY
CUTTING, GRINDING, SANDING/MACHINING MAY CAUSE EYE IRRIT. SKIN: ALLER GIC
SKIN RXN INCL REDNESS, SWELL, BLISTERING, & ITCH. MILD SKIN IRRIT INCL
REDNESS, SWELL, & ITCH. (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: HLTH HAZ: INHAL: IRRIT (UPPER RESP) INCL
SORENESS OF NOSE & THROAT, COUGHING & SNEEZING. VAPS OF HEATED MATL
MAY CAUSE RESP SYS IRRIT. DUST FROM CUTTING, GRINDING, SANDING/MACHINING MAY
CAUSE IRRIT OF RESP SYS. INGEST: MAY CAUSE IRRIT OF GI TISS INCL PAIN,
VOMIT, ABDOM TENDERNESS, NAUS, BLOOD IN VOMITUS & IN (SUP DAT)
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYES: IMMED FLUSH W/LGE AMTS OF WATER FOR AT LEAST 15 MIN. GET IMMED
MED ATTN. SKIN: IMMED WASH SKIN W/SOAP & LGE AMTS OF WATER. REMOVE CONTAM
CLTHG. IF SIGNS/SYMPS OCCUR, CALL MD. WASH CONTAM CLTHG B EFORE REUSE &
DISP OF CONTAM SHOES. INHAL: IF SIGNS/SYMPS OCCUR, REMOVE TO FRESH AIR. IF
SIGNS/SYMPS CONTINUE, CALL MD. INGEST: DO NOT INDUCE VOMIT. DRINK 2 GLASSES
OF WATER. CALL MD.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REFER TO OTHER SECTIONS OF MSDS FOR INFO ON PHYSICAL
& HLTH HAZ, RESP PROT, VENT, & PERS PROT EQUIP. IN U.S.A., CALL (612)
733-1110/(612) 733-6100 FOR 24-HR SPILL ASSIST. COVER W/ABSORB MATL. COLLECT
SPILLED MATL. PLACE IN U.S. DOT-APPRVD CONTR.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: CURE PROD ACCORDING TO PROD INSTRUCTIONS. INCIN UNCURED
WASTE IN INDUS/COMMERCIAL INCIN. DISP OF COMPLETELY CURED (OR POLYMERIZED)
MATL IN SANITARY LANDFILL. DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS (FP N).
Handling And Storage Precautions: KEEP CONTAINER TIGHTLY CLOSED. STORE AWAY
FROM HEAT. KEEP OUT OF THE REACH OF CHILDREN.
Other Precautions: AVOID EYE AND SKIN CONTACT.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: WATER, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures: WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE KNOWN.
=======================================================
Control Measures
=======================================================
Respiratory Protection: AVOID BREATHING OF VAPS. AVOID BREATHING OF DUST
CREATED BY CUTTING, SANDING/GRINDING. SELECT ONE OF THE FOLLOWING NIOSH
APPROVED RESPS BASED ON AIRBORNE CONCENTRATION OF CONTAMINANTS & I/A/W
OSHA REG ULATIONS: HALF-MASK DUST RESPIRATOR.
Ventilation: PROVIDE APPROP LOC EXHST FOR GRINDING, CUTTING/SANDING CURED MATL.
CURING OVENS MUST BE EXHAUSTED TO OUTDOORS
Protective Gloves: POLYETHYLENE/ETHYLENE VINYL ALCOHOL.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: EMERGENCY EYEWASH AND DELUGE SHOWER MEETING ANSI
DESIGN CRITERIA (FP N).
Work Hygienic Practices: DO NOT EAT, DRINK OR SMOKE WHEN USING THIS PRODUCT.
WASH EXPOSED AREAS THOROUGHLY WITH SOAP AND WATER. DO NOT INGEST.
Supplemental Safety and Health: MATLS TO AVOID: CONFINED SPACE TO PVNT
PREMATURE RXN (EXOTHERM) W/PRODUCTION OF INTENSE HEAT & SMOKE. EFTS OF
OVEREXP: FECES. EXPOS TO THIS MATL IN NORM STOR & HNDLG HAS NOT BEEN
REPORTED TO CAUSE SIG NIFICANT ADVERSE HLTH EFTS. HOWEVER, UNDER NORM
PROCESSING CNDTNS, E.G. GRINDING/HEATING, THIS PROD MAY RELEASE
=======================================================
Physical/Chemical Properties
=======================================================
Spec Gravity: 1.330 (H*2O=1)
Solubility in Water: NIL
Appearance and Odor: OFF-WHITE CREAMY PASTE, VERY SLIGHT EPOXY ODOR
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: STRONG ACIDS, STRONG OXIDIZING AGENTS. HEAT IS GENERATED
DURING CURE. DO NOT CURE MASS LARGER THAN 50 GRAMS IN (SUP DAT)
Hazardous Decomposition Products: CARBON MONOXIDE AND CARBON DIOXIDE,
ALDEHYDES, KETONES, HYDROCARBONS, TOXIC VAPORS, GASES OR PARTICULATES.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
Transportation Information
=======================================================
Trans ID NO: 124292
MSDS NAME: SCOTCHWELD 2216 B/A GRAY EPOXY ADHESIVE PART B
MSDS Prepared Date: 03/28/1995
Review Date: 12/16/1997
Multiple KIT Number: 0
Kit Part IND: Y
Review IND: Y
=======================================================
Detail DOT Information
=======================================================
DOT PSN Code: ZZZ
DOT Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail IMO Information
=======================================================
IMO PSN Code: ZZZ
IMO Proper Shipping Name: NOT REGULATED FOR THIS MODE OF TRANSPORTATION
=======================================================
Detail IATA Information
=======================================================
IATA PSN Code: ZZZ
IATA Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
Detail AFI Information
=======================================================
AFI PSN Code: ZZZ
AFI Proper Shipping Name: NOT REGULATED BY THIS MODE OF TRANSPORTATION
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SCOTCHWELD 2216 B/A GRAY EPOXY ADHESIVE PART B
Company: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Street: 3M CTR
City: SAINT PAUL MN
Zipcode: 55144-1000
Health Emergency Phone: 612-733-1110
Label Required IND: Y
Date Of Label Review: 10/09/1997
Status Code: C
Label Date: 10/09/1997
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: MODERATE EYE IRRITATION INCLUDING REDNESS,
SWELLING, PAIN, TEARING, AND HAZY VISION. VAPORS FROM HEATED MATERIAL MAY
CAUSE EYE IRRITATION. DUST CREATED BY CUTTING, GRINDING, SANDING OR MACHININ
G MAY CAUSE EYE IRRITATION. SKIN: ALLERGIC SKIN REACTION INCLUDING REDNESS,
SWELLING, BLISTERING, AND ITCHING. MILD SKIN IRRITATION INCLUDING REDNESS,
SWELLING, AND ITCHING. INHALATION: UPPER RESPIRAT ORY TRACT IRRITATION, SORE
NOSE AND THROAT, COUGHING AND SNEEZING. INGESTION: GASTROINTESTINAL TISSUE
IRRITATION, PAIN, VOMITING, ABDOMINAL TENDERNESS, NAUSEA, BLOOD IN VOMITUS
AND IN FECES. CHRONIC: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|