PPG INDUSTRIES INC -- VM&P NAPHTHA HYDROCARBON, S1119
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CFRWQ
MSDS NAME: VM&P NAPHTHA HYDROCARBON, S1119
Responsible Party
Name: PPG INDUSTRIES INC
Address: 4325 ROSANNA DRIVE
Box: 9
City: ALLISON PARK PA 15101
Info Phone: 412-492-5555
Emergency Phone Number: 304-843-1300
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: PPG INDUSTRIES INC
Address: UNKNOWN
Box: UNKNOW
City: UNKNOWN NK 00000
Phone: UNKNOWN
Name: PPG INDUSTRIES INC. COATINGS & RESINS GP
Address: 4325 ROSEANNA DR PO BOX 9
Box: 9
City: ALLISON PARK PA 15101
Phone: 412-492-5555
=======================================================
Ingredients
=======================================================
Cas: 64742-89-8
Name: VM & P NAPHTHA; (LIGHT ALIPHATIC SOLVENT NAPHTHA)
% Wt: 95-100
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Name: SPILL PROC:FOR DISPOSAL. ONLY SPILLED MATERIAL & ABSORBANT SHOULD BE
PLACED IN THIS CONTAINER.
-----------------------------
Name: RESP PROT:DETERMINE TYPE OF AIRBORNE CONTAMS AGAINST WHICH RESP IS EFTIVE
& HOW IT IS TO BE PROPERLY FITTED.
-----------------------------
Name: VENT:LEL BELOW STATED LIMIT, AS APPROPRIATE.
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE:INGEST:HARMFUL/FATAL IF SWALLOWED. EYE CONT:CAUSES
IRRIT. REDNESS, ITCH, BURNING SENSATION & VISUAL DISTURBS MAY INDICATE
EXCESSIVE CONT. SKIN CONT:MAY CAUSE MOD IRRIT. DRYNESS, ITCH, CRACKING,
BURNING, REDNESS & SWELL ARE CNDTNS ASSOC W/EXCESSIVE CONT. INHAL:VAP
& SPRAY MIST MAY BE HARMFUL IF (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ:INHALED. VAP IRRITS EYES, NOSE
& THROAT. RPTD EXPOS TO HIGH VAP CONCS MAY CAUSE IRRIT OF RESP SYS &
PERM BRAIN & NERV SYS DMG. EYE WATERING, HDCHS, NAUS, DIZZ & LOSS OF
COORD ARE INDICATIONS THAT SOLV LEVELS ARE TOO HIGH. INTENTIONAL MISUSE BY
DELIB CONC & INHAL CONTENTS CAN BE HARMFUL/FATAL. CHRONIC: (SUPDAT)
First Aid: INGEST:DO NOT INDUCE VOMIT. EYES:FLUSH IMMED W/PLENTY OF WATER FOR
AT LST 15 MINS. SKIN:FLUSH IMMED W/PLENTY OF WATER FOLLOWED BY WASHING W/SOAP
& WATER. INHAL:REMOVE TO FRESH AIR. APPLY ARTF RESP & O THER
SUPPORTIVE MEASURES AS REQD. NOTE:IF INGEST, ANY TYPE OF OVEREXP/SYMPS OF
OVEREXP OCCUR DURING/FOLLOWING USE OF PROD, CONT POIS CTL CTR, EMER ROOM/MD
IMMED. HAVE MSDS INFO AVAIL.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER NIOSH
APPRVD RESP, SKIN & EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE ALL
SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAND, VERMICULITE/OTHER NONCOMBUST
ABS ORB MATL & PLACE IN CLEAN, EMPTY CNTNRS
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: WASTE MATERIAL MUST BE DISPOSED OF I/A/W FEDERAL,
STATE, PROVINCIAL & LOCAL ENVIRONMENTAL CONTROL REGULATIONS. EMPTY
CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN APPROVED WASTE
MANAGEMENT F ACILITY.
Handling And Storage Precautions: DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS
IIIB FLAMMABLE LIQUIDS.
Other Precautions: CNTNRS SHOULD BE GROUNDED WHEN POURING. AVOID FREE FALL OF
LIQS IN EXCESS OF A FEW INCHES. IF THIS MATL IS PART OF MULTIPLE COMPONENT
COATING SYS, READ MSDS(S) FOR OTHER COMPONENT(S) BEFORE BLENDING A S
RESULTING MIXT MAY HAVE HAZS (SUPDAT)
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point Text: 50.0F,10.0C
Lower Limits: 0.9%
Extinguishing Media: USE NFPA CLASS B EXTINGS (CARBON DIOXIDE, DRY
CHEM/UNIVERSAL AQ FILM FORMING FOAM) DESIGNED TO EXTING NFPA (SUPP DATA)
Fire Fighting Procedures: USE NIOSH APPRVD SCBA & FULL PROT EQUIP (FP N).
WATER SPRAY MAY BE INEFT. WATER SPRAY MAY BE USED TO COOL CLSD CNTNRS TO PVNT
PRESS BUILD-UP & POSS (SUPP DATA)
Unusual Fire/Explosion Hazard: KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM HEAT,
ELEC EQUIP, SPKS & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE WHEN EXPOS TO
EXTREME HEAT. DO NOT APPLY ON HOT (SUPP DATA)
=======================================================
Control Measures
=======================================================
Respiratory Protection: OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING VENT
CONTROLS, VAP EXHST/FRESH AIR ENTRY. NIOSH APPRVD (TC-23C-) AIR PURIFYING/AIR
SUPPLIED (TC-19C-) RESPS MAY ALSO REDUCE EXPOS. READ RESP MFR'S INSTRUCT IONS
& LITERATURE CAREFULLY TO
Ventilation: PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO KEEP
CONC OF INGS BELOW LOWEST SUGGESTED EXPOS LIMS, &
Protective Gloves: NITRILE RUBBER/NEOPRENE RUBBER GLOVES.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS (FP N).
Other Protective Equipment: ANSI APPROVED EYE WASH FOUNTAIN & DELUGE SHOWER (FP
N). WEAR PROTECTIVE CLOTHING, INCLUDING IMPERMEABLE APRON.
Work Hygienic Practices: DISCARD CONTAMINATED CLOTHING, SHOES OR GLOVES.
Supplemental Safety and Health: EXTING MEDIA:CLASS IB FLAMM LIQ FIRES. FIRE
FIGHT PROC:AUTOIGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT. IF WATER IS USED, FOG
NOZZ ARE PREF. EXPLO HAZ:SURFS. TOX GASES MAY FORM WHEN PROD IS CONTACTED BY
FL AME/HOT SURFS. EFTS OF OVEREXP:AVOID LONG TERM & RPTD CONT. OTHER
PREC:OF ALL OF ITS PARTS.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: >239F,>115C
Vapor Pres: 15
Vapor Density: HVR/AIR
Spec Gravity: 0.75
Evaporation Rate & Reference: 144 (BUOAC=100)
Solubility in Water: 0.0%
Appearance and Odor: NON-VISCOUS LIQUID W/ODOR CHARACTERISTIC OF SOLVENTS
LISTED IN INGREDIENTS.
Percent Volatiles by Volume: 100
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NONE SPECIFIED BY MANUFACTURER.
Materials To Avoid: AVOID CONTACT W/STRONG ALKALIES, STRONG MINERAL ACIDS OR
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products: MAY PRODUCE HAZARDOUS DECOMPOSITION PRODUCTS
WHEN HEATED, INCLUDING: CARBON MONOXIDE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: VM&P NAPHTHA HYDROCARBON, S1119
Assigned IND: Y
Company: PPG INDUSTRIES INC. COATINGS & RESINS GP
Street: 4325 ROSEANNA DR PO BOX 9
PO Box: 9
City: ALLISON PARK PA
Zipcode: 15101
Health Emergency Phone: 304-843-1300
Label Required IND: Y
Date Of Label Review: 12/01/1997
Status Code: C
Label Date: 12/01/1997
Origination Code: G
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Severe
Reactivity Hazard: None
Hazard And Precautions: ACUTE:INGESTION:HARMFUL OR FATAL IF SWALLOWED. EYE
CONTACT:CAUSES IRRITATION. REDNESS, ITCHING, BURNING SENSATION AND VISUAL
DISTURBANCES MAY INDICATE EXCESSIVE CONTACT. SKIN CONTACT:MAY CAUSE MODERAT E
IRRITATION. DRYNESS, ITCHING, CRACKING, BURNING, REDNESS AND SWELLING ARE
CONDITIONS ASSOCIATED WITH EXCESSIVE CONTACT. INHALATION:VAPOR AND SPRAY MIST
MAY BE HARMFUL IF INHALED. VAPOR IRRITATES EYE S, NOSE AND THROAT.
CHRONIC:REPEATED EXPOSURE TO HIGH VAPOR CONCENTRATIONS MAY CAUSE IRRITATION
OF RESPIRATORY SYSTEM AND PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
MEDIUM GRAY LO-VOC PVC CEMENT, 31866
| |
|
MEDIUM GRAY LO-VOC PVC CEMENT, 31867
| |
|
MEDIUM GRAY LO-VOC PVC CEMENT, 31868
| |
|
MEDIUM GRAY LO-VOC PVC CEMENT, 31869
| |
|
1 GREASELESS LUBRICANT, 00116
| 64742-47-8
64742-30-9
124-38-9 |
|
H-152
| |
|
RTV SILICONE SEALANT
| |
|
EPOCAST HARDENER 946, FPC5000
| |
|
BUTYL FLEX CAULK
| |
|
SCOTCHWELD 2216 B/A GRAY EPOXY ADHESIVE PART B
| 25068-38-6
1332-58-7 |
|
289244-502 TONER FOR DPC LZR 600/900, SHARP, (SUPDAT)
| |
|
80-6106-2549-5, ADHESIVE FOR 1600 HAT HALT (SUP DAT)
| |
|
7542 SCOTCHBRAND MULTI-PURPOSE PRIMER, FH-5000-3628-7
| 7732-18-5
868-77-9 |
|
SCOTCH-SEAL 800 INDUSTRIAL SEALANT, 62-0800-2631-3
| 78-93-3
9003-18-3
8050-31-5
471-34-1
108-10-1
78-51-3
1327-39-5
13463-67-7
1309-37-1
69-72-7
1314-13-2 |
|
BC-01 INK CARTRIDGE BLACK, F45-0022-000
| |
|
PF-5060 PERFORMANCE FLUID, 98-0211-5603-3
| 86508-42-1 |
|
NO FLASH ELECTRO CONTACT CLEANER, 04018
| 1717-00-6
67-63-0
124-38-9 |
|
7070 ODC FREE CLEANER, 20162
| 64742-48-9
5989-27-5 |
|
CITRUS BASE INDUSTRIAL CLEANER (AEROSOL)
| |
|
PIG REPAIR PUTTY, TPY201
| |
|
CARBON DIOXIDE, GAS
| 124-38-9 |
|
SCOTCH-GRIP 1099 PLASTIC ADHESIVE,0-54586-00006-0
| 67-64-1
9003-18-3
9003-35-4
55185-45-0
69-72-7
1314-13-2 |
|
41650 SUPER BONDER(R) 416 GAP FILLING INST ADH
| 7085-85-0
9011-14-7
123-31-9 |
|
IPA 403
| |
|
1258 PRIMASET PT-30
| |
|
MICROFINISH (AEROSOL)
| |
|
ENERPAC HF G HOF HYDRAULIC OIL
| |
|
LATEX CONCRETE SEALANT
| |
|
HEA
| 14808-60-7
94-36-0
62395-94-2
100-42-5 |
|
THIXON 404
| |
|
NO. 5062 DEVOUR REMOVE AERO, 5062
| 75-09-2
67-56-1 |
|
NO 5195 GASKET-IN-A-CAR, 5195
| 4253-34-3
17689-77-9
112945-52-5 |
|
INPRO-CLEAN 2500, 4407
| |
|
MANGANOUS SULFATE, 1071
| 7785-87-7 |
|
HYDROGEN SULFITE TEST PAPER, 25377
| |
|
NO 2356 STIX VERTICAL DEGR, 2356
| 111-76-2 |
|
SPILFYTER MERC-I-CATOR POWDER, 5230 SERIES
| |
|
NO 2769 KEEP UP DISINFECTANT, 2769
| 111-76-2 |
|
BLASTER
| |
|
CYANIDE, IC-CN-M
| 151-50-8
1310-58-3 |
|
COMPONENT B FOR 656-58 SERIES PART B, X-502
| 123-54-6
3779-63-3
88230-35-7
110-12-3 |
|
CHEMLOK 8560
| |
|
VM&P NAPHTHA HYDROCARBON, S1119
| 64742-89-8 |
|
5053 ACCENT BASE, WALMART COLORPLACE LATEX (SUPDAT)
| 471-34-1
25265-77-4
107-21-1
1332-58-7 |
|
WALMART INT FLAT DEEP BASE, 5052
| 471-34-1
25265-77-4
107-21-1
13463-67-7
1332-58-7 |
|
OVEN BRITE, 08771
| 34590-94-8
1310-73-2
7732-18-5 |
|
PRIMASHEET 1000
| |
|
TAPOUT
| |
|
CHEMLOK Y-4310
| 64-17-5
67-56-1 |
|
CHEMLOK 253X
| |
|
|