LE BLOND MAKINO MACHINE TOOL C -- C22N
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CGVGG
MSDS NAME: C22N
Responsible Party
Name: LE BLOND MAKINO MACHINE TOOL CO
Address: 7680 INNOVATION WAY
City: MASON OH 45040-9965
Info Phone: 513-573-7494
Emergency Phone Number: 513-573-7494
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: LE BLOND MAKINO MACHINE TOOL CO
Address: 7680 INNOVATION WAY
City: MASON OH 45040-9965
Phone: 513-573-7494
Name: MAKINO
Address: 4624 EAST TECH DRIVE
City: CINCINNATI OH 45245
Phone: 513-573-7200
=======================================================
Ingredients
=======================================================
RTECS #: ZB2233500
Name: PETROLEUM OIL (LIGHT, MINERAL)
OSHA PEL: (MIST) (MFR)
ACGIH TLV: 5 MG/M3 (MFR)
-----------------------------
Name: ADDITIVES
% Wt: <1
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: NO
Skin: NO
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: TOXIC TO ALEMENTARY CANAL FAUNA. SKIN, EYE
IRRITANT. SIGNS AND SYMPTOMS OF EXPOSURE: REDDENING OF SKIN OR EYES IF
CONTACT WITH MIST. INGESTION CAN RESULT IN DIARRHEA.
Explanation Of Carcinogenicity: NOT RELEVANT.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
Medical Cond Aggravated By Exposure: DERMATITIS.
First Aid: INGEST:CALL MD IMMEDIATELY (FP N). INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) (FP N). SKIN: WASH AFFECTED AREA WITH
COOL WATER AND SOAP. EYES: RINSE WITH COOL WATER FOR AT LEAST 15 MINUTES.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: NOT A SIGNIFICANT HLTH HAZARD. CONTAIN SPILL. PUMP
LIQUID INTO DRUM FOR INCINERATION OR REUSE. SPREAD OIL DRY ON AREA &
SWEEP. SHOVEL INTO DRUM. DISPOSE OF LIQUID BY INCINERATION.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE OF ABSORBED SOLID IN LANDFILL ACCORDING TO EPA
FEDERAL, STATE AND LOCAL RULES.
Handling And Storage Precautions: STORE IN A COOL DRY PLACE AWAY FROM HEAT.
Other Precautions: NONE SPECIFIED BY MANUFACTURER.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Text: 380F,193C
Extinguishing Media: DRY CHEMICAL, FOAM, CO*2.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N). COOL CONTAINERS WITH SPRAY IN A FIRE.
Unusual Fire/Explosion Hazard: WATER MAY CAUSE FROTHING OR SPREAD BURNING
LIQUID; COMBUSTIBLE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NONE OR NIOSH APPROVED HALF MASK HIGH EFFECTIVE CART.
NIOSH APPRVD FULL MASK IF MIST.
Ventilation: LOCAL EXHAUST: AT SOURCE OF MIST. MECHANICAL (GENERAL): YES.
Protective Gloves: NITRILE GLOVES.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPRVD EYE WASH & DELUGE SHOWER (FP N). TYVEK
OPTIONAL. APRON, NITRILE BOOTS.
Work Hygienic Practices: DO NOT BREATHE VAPORS. DO NOT CONTACT SPRAY OR MIST.
Supplemental Safety and Health: BP: UNDEFINED, VERY HIGH AT 760F,404C. SOL IN
H*2O: NOT SOLUBLE. MAY DISPERSE.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: SUPDAT
Spec Gravity: 0.82 (H*2O=1)
Solubility in Water: SUPP DATA
Appearance and Odor: OILY, COLORLESS LIQUID, MEDIUM VISCOSITY, LIGHT ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: NO REACTIVITY HAZARD.
Materials To Avoid: AVOID ACIDS AND OXIDIZERS.
Hazardous Decomposition Products: CO, CO*2.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: C22N
Assigned IND: Y
Company: LE BLOND MAKINO MACHINE TOOL CO
Street: 7680 INNOVATION WAY
City: MASON OH
Zipcode: 45040-9965
Health Emergency Phone: 513-573-7494
Label Required IND: Y
Date Of Label Review: 04/13/1998
Status Code: C
Label Date: 04/13/1998
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE: TOXIC TO ALEMENTARY CANAL FAUNA. SKIN, EYE
IRRITANT. SIGNS AND SYMPTOMS OF EXPOSURE: REDDENING OF SKIN OR EYES IF
CONTACT WITH MIST. INGESTION CAN RESULT IN DIARRHEA. CHRONIC: NONE LISTED BY
MA NUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.